Nešiojamojo automobilio užvedimo įrenginio „WOLFBOX 3000A“ naudotojo vadovas

1. Įvadas

Thank you for choosing the WOLFBOX 3000A Portable Car Jump Starter. This device is designed to provide a reliable and powerful solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.

2. Saugos informacija

WARNING: Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Laikyti vaikams nepasiekiamoje vietoje.
• Do not immerse the product in water or expose it to rain.
• Nenaudokite gaminio sprogioje aplinkoje, pvz., kur yra degių skysčių, dujų ar dulkių.
• Nepradėkite šokinėti užšalusio akumuliatoriaus.
• Įsitikinkite, kad prijungimas yra teisingas – poliškumas teisingas (raudonas kontaktasamp į teigiamą, juodą klamp to negative) to avoid sparks and damage.
• Nejunkite teigiamo ir neigiamo jungčiųamps kartu.
• If the product is damaged, do not use it. Contact customer service for assistance.
• Use only the provided jumper cables and accessories.
• Do not leave the jump starter connected to the vehicle battery after starting the vehicle.

Image: The WOLFBOX 3000A Jump Starter features a 10-Point Safety System, providing comprehensive protection against various electrical hazards during operation.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• WOLFBOX 3000A Jump Starter (MegaVolt16)
• Smart Jumper Cables with Battery Clamps
• USB-C į USB-C įkrovimo laidas
• EVA nešiojimo dėklas
• Vartotojo vadovas

Image: All components included in the WOLFBOX 3000A Jump Starter package.

4. Produktas baigtasview

Familiarize yourself with the different parts of your WOLFBOX 3000A Jump Starter:

Vaizdas: priekis view of the WOLFBOX 3000A Jump Starter.

Image: Integrated Versatility - Key features and ports of the WOLFBOX 3000A Jump Starter.

• LCD ekranas: Rodo baterijos proctage, input/output status, and error messages.
• Maitinimo mygtukas: Turns the device on/off and cycles through LED light modes.
• Padidinimo mygtukas: Activates boost mode for severely discharged batteries.
• LED žibintuvėlis: Provides illumination with multiple modes (lighting, SOS, strobe).
• PD65W USB-C In/Out Port: For charging the jump starter and charging other devices.
• QC3.0 USB-A prievadas: For charging other electronic devices.
• Jumper Cable Socket: Jungiamasi prie išmaniųjų užvedimo laidų.

5. Užvedimo laidininko įkrovimas

Before first use, fully charge the WOLFBOX 3000A Jump Starter. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

1. Connect the provided USB-C to USB-C charging cable to the PD65W USB-C In/Out port on the jump starter.
2. Connect the other end of the USB-C cable to a 65W (or higher) USB-C power adapter (not included).
3. The LCD screen will display the charging status and battery percentage. The unit is fully charged when the screen shows 100%.

Note: A 65W fast charger can charge the jump starter to 80% in approximately 30 minutes.

Image: The jump starter's 65W USB-C port can quickly charge the unit itself or other electronic devices.

6. Naudojimo instrukcijos

6.1. Jump Starting a Vehicle (Normal Mode)

Prieš bandydami užvesti transporto priemonę, įsitikinkite, kad užvedimo jungiklis yra įkrautas bent 50 %.

1. Turn off your vehicle's ignition and all accessories (headlights, radio, etc.).
2. Connect the blue end of the smart jumper cables to the jumper cable socket on the WOLFBOX 3000A Jump Starter. Ensure a firm connection.
3. Pritvirtinkite raudona (+) klamp prie teigiamo jūsų automobilio akumuliatoriaus gnybto.
4. Pritvirtinkite juoda (-) klamp prie neigiamo jūsų automobilio akumuliatoriaus gnybto.
5. Once connected, the jump starter's LCD screen should display "START" with a green light, indicating a correct connection and readiness to start.
6. Užveskite savo transporto priemonės variklį.
7. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp, tada raudonas (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Normal Start Modes - Step-by-step guide for jump starting a vehicle.

6.2. Jump Starting a Vehicle (Boost Mode)

Use Boost Mode if your vehicle's battery is severely discharged (below 9V) and the jump starter does not automatically display "START" in normal mode.

1. Follow steps 1-4 from the Normal Jump Start procedure (connect clamps to battery and jump starter).
2. If the screen displays "LOW" or does not show "START", press and hold the „Boost“ mygtukas on the jump starter for 2-3 seconds until the screen displays "START" with a green light.
3. Užveskite savo automobilio variklį per 30 sekundžių.
4. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp, tada raudonas (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Boost Start Modes - Step-by-step guide for jump starting a vehicle with a severely discharged battery.

6.3. LED žibintuvėlio naudojimas

The integrated LED flashlight has three modes: constant light, SOS signal, and strobe light.

1. Paspauskite ir palaikykite Maitinimo mygtukas for 3 seconds to turn on the flashlight (constant light mode).
2. Press the Power button once to cycle to SOS mode.
3. Press the Power button again to cycle to strobe mode.
4. Press the Power button a third time to turn off the flashlight.

Image: The 200-Lumen LED Flashlight provides illumination and emergency signaling.

6.4. Naudojimas kaip nešiojamos išorinės baterijos

The WOLFBOX 3000A can charge various electronic devices via its USB ports.

• Connect your device's charging cable to either the PD65W USB-C Out port or the QC3.0 USB-A port on the jump starter.
• The jump starter will automatically begin charging your device. The LCD screen will indicate "OUT" status.
• Atjunkite įrenginį, kai įkrovimas bus baigtas.

7. Priežiūra

Proper maintenance ensures the longevity and performance of your jump starter.

• Saugykla: Laikykite užvedimo įrenginį vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Įkrovimas: Recharge the unit every 3-6 months, even if not used, to maintain battery health. A fully charged unit can hold its charge for up to two years under moderate conditions.
• Valymas: Įrenginio išorę valykite sausa, minkšta šluoste. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių medžiagų.
• Kabelio priežiūra: Inspect jumper cables for any damage before each use. Store them neatly in the carrying case.

Image: The WOLFBOX 3000A Jump Starter features a 2-year standby capability, requiring periodic recharging for optimal performance.

8. Problemų sprendimas

Image: The large screen display provides clear status indicators for easy troubleshooting.

9. Specifikacijos

10. Garantija ir klientų aptarnavimas

WOLFBOX provides a comprehensive warranty and dedicated customer support for your product.

• Garantinis laikotarpis: 24 mėnesių nuo pirkimo datos.
• Aprėptis: This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
• Klientų aptarnavimas: For any questions, issues, or warranty claims, please contact WOLFBOX customer service.
• El. paštas: service@wolfbox.com
• Telefonas: +1 888 296 8399

Please have your purchase receipt and product model number (MegaVolt16) ready when contacting support.