Yaheetech Mid Back Faux Leather Desk Office Chair Instruction Manual

Svarbi saugos informacija

Prieš surinkdami ir naudodami, atidžiai perskaitykite visas instrukcijas. Išsaugokite šį vadovą ateičiai.

WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.

Pakuotės turinys

Ensure all components are present before beginning assembly. Refer to the diagram below for identification.

Image: All chair components laid out for inspection.

• Atlošas (A)
• Sėdynė (B)
• Porankiai (C)
• Gas Lift (D)
• Base (E)
• Casters (F)
• Aparatūra (varžtai, poveržlės, šešiabriaunis raktas)

Surinkimo instrukcijos

Follow these steps to assemble your Yaheetech office chair. An assembly video is provided for visual guidance.

1 veiksmas: pritvirtinkite ratukus prie pagrindo

Insert the five casters (F) into the holes at the end of each leg of the chair base (E). Push firmly until they click into place.

Image: Assembly diagram illustrating caster attachment.

Step 2: Insert Gas Lift

Place the gas lift (D) into the center hole of the assembled base. Important: Remove the black plastic cap from the top of the gas lift before insertion.

Image: Removing the black plastic cap from the gas lift.

Step 3: Attach Armrests to Seat

Align the armrests (C) with the pre-drilled holes on the underside of the seat (B). Secure them using the provided screws and the Allen wrench. Ensure they are tightened securely.

4 žingsnis: pritvirtinkite mechanizmą prie sėdynės

Position the chair mechanism (part of the hardware kit) onto the underside of the seat, aligning the holes. Secure it with the appropriate screws using the Allen wrench. Ensure the 'FRONT' label on the mechanism faces the front of the seat.

Step 5: Attach Backrest to Seat

Connect the backrest (A) to the seat assembly. Align the metal brackets of the backrest with the corresponding holes on the seat's underside and secure with screws.

6 veiksmas: prijunkite sėdynės mazgą prie dujų keltuvo

Carefully place the assembled seat onto the gas lift, ensuring the center hole of the mechanism aligns with the top of the gas lift. Press down firmly to secure.

Jūsų kėdės valdymas

Your Yaheetech office chair offers several adjustable features for personalized comfort.

Sėdynės aukščio reguliavimas

To adjust the seat height, pull the lever located on the right side of the seat upwards. While seated, lift the lever to lower the seat. To raise the seat, lift the lever while standing or with minimal weight on the seat.

Tilting and Rocking Function

The chair features a tilt mechanism for a comfortable rocking/reclining option. Pull the lever outwards to activate the rocking motion. Push the lever inwards to lock the chair in an upright position. The tilt tension can be adjusted by turning the round knob located underneath the seat.

Image: Rocking function and tilt tension adjustment.

360 laipsnių pasukimas

The chair's seat can swivel 360 degrees, providing essential mobility and ease of access to your workspace.

Detachable Armrests

The armrests are designed to be detachable. You can choose to use the chair with or without armrests based on your preference and space requirements. Removing them allows for a more relaxed sitting posture or to push the chair further under a desk.

Image: Chair shown with and without armrests.

Priežiūra ir priežiūra

Tinkama priežiūra prailgins jūsų kėdės tarnavimo laiką ir išvaizdą.

• Valymas: The supple PU leather is water-resistant. Wipe clean with a damp šluoste ir švelniu muilu. Venkite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Patikra: Periodiškai patikrinkite visus varžtus ir veržles, ar jie gerai priveržti. Jei reikia, priveržkite.
• Judėjimas: Ensure casters are free of debris for smooth rolling.

Image: Features of the premium PU leather and high-density foam.

Trikčių šalinimas

• Kėdės aukštis nereguliuojamas: Ensure the black plastic cap has been removed from the gas lift. Check if the gas lift lever is fully engaged.
• Chair not tilting/rocking: Ensure the tilt lever is pulled outwards to enable the rocking function. Adjust the tilt tension knob if the chair feels too stiff or too loose.
• Ratai rieda nelygiai: Check casters for any trapped hair or debris and clean them. Ensure casters are fully inserted into the base.
• Kėdė nestabili: Verify that all screws are securely tightened, especially those connecting the seat, backrest, and armrests.

Gaminio specifikacijos

Paveikslėlis: Išsamūs gaminio matmenys.

Garantija ir klientų aptarnavimas

For warranty information or customer support, please refer to the documentation included with your purchase or contact Yaheetech directly through their official websvetainėje arba klientų aptarnavimo kanalais. Išsaugokite pirkimo kvitą, jei prireiktų pateikti pretenziją dėl garantijos.