Minetom BL-HW02

Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector User Manual

Model: BL-HW02

1. Įvadas

Ačiū, kad pirkoteasing the Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector. This device is designed to create dynamic and decorative light displays for various occasions, both indoors and outdoors. Featuring multiple color combinations, motion effects, and remote control operation, it offers a versatile lighting solution. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Saugos informacija

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

4. Sąranka

4.1 Choosing an Installation Method

The projector offers three installation options: ground-mounted, wall-mounted, or placed on a flat surface.

Minetom laser light projector showing three installation methods: wall-mounted, ground-mounted, and placed on a flat surface.

Image: The Minetom laser light projector can be installed in three ways: wall-mounted, ground-mounted, or placed on a flat surface using the included accessories.

  1. Ground-Mounted: Attach the ground stake to the projector. Insert the stake firmly into soft ground in your desired outdoor location.
  2. Sieninis: Attach the round base to the projector. Secure the base to a wall using appropriate screws (not included) for a stable installation.
  3. Placed on Plane: Attach the round base to the projector. Place the projector on any stable, flat surface indoors or outdoors.

4.2 Maitinimo jungtis

5. Naudojimo instrukcijos

Once powered on, the projector will begin its default light show. Use the RF remote control to customize the display.

5.1 Nuotolinio valdymo pulto funkcijos

The RF remote control allows you to manage various settings from a distance. Ensure 2*AAA batteries (not included) are installed in the remote.

Diagram of the RF remote control for the Minetom laser light projector, showing buttons for power, timers, color selection, motion, and strobe effects.

Image: RF Remote Control layout with functions for each button.

Nuotolinio valdymo pulto mygtukų funkcijos
MygtukasFunkcija
ĮJUNGTA/IŠJUNGTAĮjungia arba išjungia projektorių.
2H / 4H / 6HSets the timer for 2, 4, or 6 hours.
(H) RestoreRestores to default timing (6 hours on, 18 hours off).
Spalvų ciklasCycles through Green, Blue, Red-Green, Blue-Green, Red-Blue, Red-Green-Blue, and Red-Green-Blue cycle.
Kvėpavimo režimasActivates a slow fade-in/fade-out effect.
Jumping ModeActivates a rapid color change effect.
S0 (Static)Sets the light display to static (no motion).
S- / S+Adjusts rotation speed (S- for slow, S+ for fast).
R / G / BSelects Red, Green, or Blue light individually.
R/G/B BreathingActivates breathing mode for individual Red, Green, or Blue colors.
R/G/B StrobeActivates strobe mode for individual Red, Green, or Blue colors. Press sequentially to adjust speed (Slow, Medium, Fast, Stop).
R/G/B SteadySets individual Red, Green, or Blue colors to steady (non-flashing).

5.2 XNUMX spalvų derinių

The projector supports various color combinations to create diverse effects.

Seven different color combinations displayed by the Minetom laser light projector: Red, Green, Blue, Red Green, Red Blue, Green Blue, and Red Green Blue.

Vaizdas: pvzamples of the 7 available color combinations.

6. IP65 atsparumo vandeniui įvertinimas

The projector body is designed with an IP65 waterproof rating, ensuring reliable performance in various weather conditions such as snow, rain, dust, and intense sunlight. It is cold-proof, operating effectively from -30°F to 104°F.

Minetom laser light projector operating outdoors in both rain and snow, demonstrating its IP65 waterproof and cold-proof capabilities.

Image: The projector operating in rainy and snowy conditions, highlighting its IP65 waterproof and cold-proof features.

7. Coverage Area

The projector can cover a significant area, illuminating indoor ceilings, walls, or outdoor walls, gardens, lawns, trees, and rooftops. From a distance of 32.8 feet, it can cover approximately 3229.17 square feet.

Diagram showing the Minetom laser light projector's coverage area increasing with distance, from 226 sq ft at 10 ft to 3541 sq ft at 40 ft.

Image: Coverage area chart illustrating how the projected area expands with increased distance from the surface.

8. Priežiūra

9. Problemų sprendimas

Bendros problemos ir sprendimai
ProblemaSprendimas
Projektorius neįsijungia.
  • Įsitikinkite, kad maitinimo adapteris yra patikimai prijungtas prie veikiančio lizdo.
  • Check if the remote control batteries are correctly installed and not depleted.
  • Press the ON/OFF button on the remote.
Nuotolinio valdymo pultas nereaguoja.
  • Replace the remote control batteries (2*AAA, not included).
  • Įsitikinkite, kad tarp nuotolinio valdymo pulto ir projektoriaus nėra jokių kliūčių.
  • Confirm you are within the remote's operating range.
Šviesos srautas yra silpnas arba nepastovus.
  • Nuvalykite projektoriaus objektyvą, jei jis atrodo nešvarus.
  • Ensure the projector is not operating in extreme temperatures outside its specified range.
Multiple projectors interfere with each other.
  • This can occur with multiple RF remote-controlled devices. Try to operate one projector at a time, or position them further apart.

10. Specifikacijos

FunkcijaDetalė
Modelio numerisBL-HW02
Prekės ženklasMinetom
SpalvaRaudona Žalia Mėlyna
MedžiagaPlastikiniai
Apdailos tipasProjektorius
Šviesos šaltinio tipasŠviesos diodas
Maitinimo šaltinisSu laidu elektra
Montavimo tipasMontavimas ant grindų, ant sienos
Gaminio matmenys2.75 colio ilgio x 2.75 colių pločio x 11.02 colio aukščio
Prekės svoris14 uncijos
Spindulio kampas120 laipsnių
Atsparumo vandeniui įvertinimasIP65
Darbinė temperatūra-30°F iki 104°F
Coverage Area (approx.)3229.17 sq ft at 32.8 ft distance

11. Garantija ir palaikymas

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Minetom websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Susiję dokumentai - BL-HW02

Preview „Minetom S14“ saulės girliandų naudotojo vadovas ir saugos vadovas
Išsamus „Minetom S14“ saulės energija varomų šviestuvų girliandų vadovas, kuriame aptariamas montavimas, naudojimas, saugos priemonės, trikčių šalinimas ir informacija apie garantiją. Sužinokite, kaip nustatyti ir prižiūrėti saulės energija varomas šviestuvų girliandas.
Preview BlissLights BL-15 Laser Projector User Guide, Specifications, and Warranty
Comprehensive user guide for the BlissLights BL-15 laser projector. Includes setup, operation, safety notices, product specifications, installation tips, and limited warranty information.
Preview „BlissLights BL-50“ lazerinio projektoriaus naudotojo vadovas ir specifikacijos
Išsamus „BlissLights BL-50“ lazerinio projektoriaus naudotojo vadovas, kuriame aptariama sąranka, veikimas, sauga, specifikacijos ir ribota garantija.
Preview „Panasonic“ tinklo kameros BL-VT164/BL-VP100 serijos naudojimo instrukcijos
Išsamios „Panasonic BL-VT164“ serijos ir BL-VP100 serijos tinklo kamerų naudojimo instrukcijos. Apima sąranką, konfigūravimą, stebėjimą ir priežiūrą.
Preview Išmaniosios „Wi-Fi“ muzikos žvaigždės formos švieselės naudotojo vadovas – BL-XK01
Išsamus „Shenzhen Bolong Technology Co., Ltd.“ išmaniosios „Wi-Fi“ muzikos žvaigždės formos lempos (modelis BL-XK01) naudotojo vadovas, kuriame išsamiai aprašomas sąranka, veikimas, programėlės valdymas per „Smart Life“, balso komandos, trikčių šalinimas ir saugos priemonės.
Preview BL-3D01 naudotojo vadovas: sąranka, veikimas ir specifikacijos
Išsamus projektoriaus įrenginio BL-3D01 naudotojo vadovas, kuriame išsamiai aprašytas išpakavimas, sąranka, mygtukų funkcijos, nuotolinio valdymo pulto veikimas, specifikacijos ir informacija apie reglamentus.