VINZ Shuto Jet Helmet User Manual

1. Įvadas

Thank you for choosing the VINZ Shuto Jet Helmet. This helmet is designed to provide protection and comfort for riders of scooters, motorcycles, and mopeds. It complies with the ECE 22.06 safety standard, ensuring it meets stringent European safety requirements. Please read this manual thoroughly before using your helmet to ensure proper fit, operation, and maintenance.

Proper use and care are essential for maintaining the helmet's protective qualities and extending its lifespan. Always prioritize your safety on the road.

2. Kas yra dėžutėje

• VINZ Shuto Helmet
• Helmet Cover
• Vartotojo vadovas

3. Saugos informacija

Your VINZ Shuto helmet is ECE 22.06 homologated, signifying its compliance with European safety standards. However, no helmet can protect against all foreseeable impacts. For maximum protection, always ensure:

• Tinkamas pritaikymas: The helmet must fit snugly and comfortably.
• Saugus tvirtinimas: The chin strap must always be securely fastened.
• Jokių pakeitimų: Never modify the helmet's structure, including drilling holes or applying paint/solvents, as this can compromise its integrity.
• Smūgio žala: A helmet that has sustained an impact, even if it appears undamaged, should be replaced immediately. Its protective capacity may be compromised.
• Matomumas: Ensure visors are clean and free from obstructions. Use the sun visor appropriately for light conditions.

WARNING: Always wear appropriate protective gear when riding, including gloves, jacket, and trousers, in addition to your helmet.

4. Sąranka ir montavimas

4.1 Tinkamo dydžio pasirinkimas

A helmet must fit correctly to provide optimal protection. To determine your size, measure the circumference of your head approximately 2.5 cm (1 inch) above your eyebrows. Refer to the size chart below:

Image: VINZ Shuto Helmet Size Guide. This image illustrates how to measure head circumference and provides corresponding helmet sizes from XS (53/54 cm) to XXL (61 cm).

• XS: 53-54 cm
• S: 55-56 cm
• M: 57-58 cm
• L: 59 cm
• XL: 60 cm
• XXL: 61 cm

A properly fitted helmet should feel snug around your head and cheeks without causing uncomfortable pressure points. It should not move freely when you shake your head.

4.2 Fastening the Chin Strap

The VINZ Shuto helmet features a quick-release ratchet closure system. To fasten:

1. Įkiškite įpjautą dirželį į sagtį, kol jis tvirtai spragtelės.
2. Pull the strap to ensure it is tight enough that the helmet cannot be rolled off your head.
3. Norėdami atlaisvinti, patraukite raudoną sagties skirtuką.

4.3 Attaching/Detaching the Chin Bar

The VINZ Shuto helmet features a removable chin bar, allowing it to be used as a streetfighter-style helmet or a more open jet helmet. To attach or detach the chin bar, locate the release mechanisms on both sides of the helmet near the visor pivots. Follow the specific instructions provided with your helmet for safe removal and attachment.

Vaizdas: priekis view of the VINZ Shuto helmet with the chin bar attached, showcasing its streetfighter design.

Vaizdas: Šoninė view of the VINZ Shuto helmet without the chin bar, demonstrating its jet helmet configuration with the main visor raised.

5. Operating the Helmet Features

5.1 Main Visor Operation

The main visor is scratch-resistant and provides clear vision. It can be easily raised and lowered using the tab located on the bottom edge. Ensure the visor is fully closed when riding to protect against wind, debris, and insects.

Image: The VINZ Shuto helmet shown with both the main clear visor and the internal sun visor in the down position, ready for use.

5.2 Integrated Sun Visor

The helmet includes an integrated sun visor to protect your eyes from intense sunlight and glare. This visor operates independently of the main visor. Use the lever located on the side of the helmet to deploy or retract the sun visor. Only use the sun visor during daylight hours and retract it in low-light conditions or at night for optimal visibility.

5.3 Vėdinimo sistema

The VINZ Shuto helmet features an effective ventilation system with strategically placed air inlets and outlets. These vents promote optimal air circulation and cooling during your ride. Adjust the sliders on the vents to control airflow according to your comfort and weather conditions.

Vaizdas: Šoninė view of the VINZ Shuto helmet, highlighting the ventilation ports and overall aerodynamic design.

6. Priežiūra ir priežiūra

6.1 Cleaning the Helmet Shell

Clean the helmet shell with a soft cloth, warm water, and mild soap. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's finish and material integrity. Rinse thoroughly and air dry.

6.2 Cleaning the Visors

The visors should be cleaned with warm water and a soft, lint-free cloth. For stubborn dirt, use a specialized helmet visor cleaner. Do not use abrasive materials or paper towels, which can scratch the visor surface. Allow to air dry completely before reattaching.

6.3 Cleaning the Interior Lining

The VINZ Shuto helmet features a removable and washable interior lining. Carefully detach the lining components according to the instructions provided with your helmet. Hand wash the lining in cold water with mild soap. Rinse thoroughly and allow to air dry completely before reinserting into the helmet. Ensure the lining is fully dry to prevent mildew and odors.

7. Problemų sprendimas

• Skydelio rasojimas: Ensure proper ventilation by opening the helmet vents. Anti-fog treatments or inserts can also be used.
• Loose Chin Strap: Re-adjust the quick-release buckle to ensure a snug fit. If the mechanism is damaged, discontinue use and seek professional inspection.
• Nepatogus prigludimas: Re-check your head measurement against the size chart. If the helmet is too tight or too loose, it may be the wrong size.
• Per didelis triukšmas: Ensure all visors are fully closed and the chin bar (if attached) is securely in place. Check for any gaps or loose components.

For issues not listed here, or if troubleshooting steps do not resolve the problem, contact customer support.

8. Specifikacijos

9. Informacija apie garantiją

VINZ provides a warranty for manufacturing defects for a period of 1 year from the date of purchase. This warranty covers the availability of spare parts within the EU for the same duration. The warranty does not cover damage resulting from improper use, accidents, modifications, or normal wear and tear. Please retain your proof of purchase for any warranty claims.

For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact VINZ customer support.

10. Pagalba ir kontaktai

If you have any questions, require assistance, or need to report an issue with your VINZ Shuto helmet, please contact our customer support team.

• Palaikymas internetu: Visit the official VINZ webDUK ir pagalbos išteklių svetainė.
• El. paštas: Refer to your purchase documentation for the appropriate support email address.
• Telefonas: Contact details may be available on the VINZ websvetainėje arba produkto pakuotėje.

When contacting support, please have your helmet model (Shuto BIS849M) and proof of purchase readily available.