1. Įvadas
Welcome to the user manual for the FUZRR FR2050 Flexible Coil Power Three-Phase Tester. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage or injury.
Saugos priemonės
- Always adhere to local electrical safety regulations and standards.
- Nebandykite matuoti tūriotages or currents exceeding the specified limits of the device.
- Ensure the device is in good working condition and free from visible damage before each use.
- Nenaudokite prietaiso šlapioje arba damp aplinkos.
- Neatidarykite įrenginio c.asing, nebent tai nurodytų kvalifikuotas personalas.
2. Produktas baigtasview
The FUZRR FR2050 is a versatile flexible clamp power tester designed for comprehensive three-phase AC measurements. It features a flexible Rogowski coil for easy clamping around conductors, enabling precise measurement of voltage, current, frequency, and phase sequence. Its lightweight and compact design make it suitable for various industrial and scientific applications.
Pagrindinės savybės
- Flexible Coil: Available with φ150mm (FR2050) or φ300mm (FR2050E) jaw sizes for diverse applications.
- Duomenų saugykla: Capable of storing up to 200 groups of measurement data for later review.
- Automatic Frequency Recognition: Automatically detects 50Hz/60Hz frequencies.
- Linija Voltage Matavimas: Supports line voltage measurements below AC 600V.
- Lengvas dizainas: Weighs approximately 250g, enhancing portability and ease of use.
Figure 2.1: FUZRR FR2050 Flexible Coil Power Three-Phase Tester with carrying bag.
Figure 2.2: The FR2050 Flexible Clamp Power Meter, emphasizing its ability to perform voltage, current, phase, power, and frequency tests.
Prietaiso komponentai
2.3 pav.: Išsamus view of the FR2050 tester with labels pointing to its key components: the Roche sensor coil, the coil knob, the liquid crystal display, the key area (buttons), and the voltage input jacks (U1, U2, U3, COM).
3. Sąranka
3.1. Akumuliatoriaus įdėjimas
The FUZRR FR2050 requires one Lithium Metal battery (included). To install the battery:
- Suraskite akumuliatoriaus skyrių įrenginio gale.
- Atidarykite akumuliatoriaus skyriaus dangtelį.
- Insert the battery, ensuring correct polarity as indicated inside the compartment.
- Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.
3.2. Bandymo laidų prijungimas
Connect the provided test leads to the voltage input jacks located at the bottom of the device. The jacks are typically labeled U1, U2, U3, and COM. Ensure each lead is securely plugged into its corresponding jack for accurate readings.
3.3. Flexible Coil Connection
The flexible coil is integrated into the device. Ensure the coil knob is securely fastened to maintain proper contact and measurement integrity.
4. Naudojimo instrukcijos
4.1. Maitinimo įjungimas/išjungimas
To power on the device, press and hold the red power button (marked with a circle and a vertical line) located on the front panel until the Liquid Crystal Display (LCD) illuminates. To power off, press and hold the same button until the display turns off.
4.2. Režimo pasirinkimas
Use the "MODE" button to cycle through the various measurement functions. Each press will switch to the next available mode, such as voltage, current, frequency, phase, or power. The currently selected mode will be indicated on the LCD.
4.3. Matavimo procedūra
- Pasirinkite režimą: Press the "MODE" button to choose the desired measurement function (e.g., AC Current, AC Voltage, Frequency).
- Atvira ritė: Turn the coil knob to open the flexible Rogowski coil.
- Clamp Dirigentas: Carefully position the open coil around the conductor(s) you wish to measure. Ensure the coil completely encircles the conductor(s) and is fully closed and secured by turning the coil knob back.
- Skaitykite matavimą: The measurement values will be displayed on the LCD.
4.4. Duomenų sulaikymas
Paspauskite mygtuką „HOLD“, kad užfiksuotumėte dabartinį rodmenį ekrane. Tai naudinga įrašant matavimus sunkiai aptinkamose vietose.view situations. Press the "HOLD" button again to release the held reading and resume live measurements.
4.5. Duomenų saugojimas
To save a measurement, press the "SET" button. The device can store up to 200 groups of measurement data. When the storage capacity is reached, a "FULL" symbol will be displayed on the LCD, indicating that no more data can be saved until existing data is cleared or transferred.
5. Priežiūra
5.1. Valymas
To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing or display. Ensure no moisture enters the device.
5.2. Baterijos keitimas
When the low battery indicator appears on the LCD, replace the battery promptly to ensure continued accurate operation. Refer to Section 3.1 for battery installation instructions.
5.3. Sandėliavimas
Store the FUZRR FR2050 in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If the device will not be used for an extended period, it is recommended to remove the battery to prevent leakage and potential damage.
6. Problemų sprendimas
This section addresses common issues you might encounter with your FUZRR FR2050 tester. If you experience a problem not listed here, or if the suggested solutions do not resolve the issue, please contact customer support.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia | Žemas arba išsikrovęs akumuliatorius; neteisingas akumuliatoriaus įdėjimas | Patikrinkite akumuliatoriaus įdėjimą ir įkrovos lygį. Jei reikia, pakeiskite akumuliatorių. |
| No reading on display | Flexible coil not properly clamped; Incorrect measurement mode selected; Loose test lead connections | Ensure the flexible coil is fully closed around the conductor. Verify the correct measurement mode is selected. Check all test lead connections. |
| Netikslūs rodmenys | Coil not fully closed; Measurement range inappropriate; External electromagnetic interference | Ensure the coil is completely closed with no gaps. Verify the measurement range is suitable for the circuit. Move away from strong electromagnetic fields. |
| "FULL" symbol displayed | Data storage is at maximum capacity | The device's internal memory for data storage is full. Review and clear stored data if needed (refer to advanced operation section, if available, or contact support for instructions on clearing data). |
7. Specifikacijos
The following table outlines the technical specifications for the FUZRR FR2050 Flexible Coil Power Three-Phase Tester.
| Parametras | Specifikacija |
|---|---|
| Modelis | FR2050 (EC-FR2050) |
| Prekės ženklas | FUZRR |
| Matavimo funkcijos | ttage, Current, Phase, Frequency, Power |
| Flexible Coil Jaw Size | φ150mm (FR2050), φ300mm (FR2050E) |
| Ritės ilgis | 470mm (FR2050), 950mm (FR2050E) |
| Kintamosios srovės diapazonas | Up to 3000A (Flexible Coil) |
| AC ttage Diapazonas | Iki 600V |
| Dažnis | 50Hz/60Hz automatic recognition |
| Sample Įvertinkite | Approximately 2 times/second |
| Duomenų saugykla | 200 grupės |
| Prekės svoris | 1 kilogramas (2.2 svaro) |
| Baterijos | 1 ličio metalo baterija (pridedama) |
| Atitiktis | CE, RoHS |
| Pasiekiama pirmoji data | 4 m. liepos 2024 d |
Figure 7.1: Model and Specification comparison for FR2050 and FR2050E.
Kas yra dėžutėje
Figure 7.2: The product package includes the FR2050 instrument, a packing box, an instrument pack (carrying bag), a set of 4 test clips, a set of 4 test markers, a specification sheet, a warranty card, and 3 batteries.
8. Garantija ir palaikymas
The FUZRR FR2050 Flexible Coil Power Three-Phase Tester is manufactured by FUZRR. For specific warranty information, including terms, conditions, and duration, please refer to the warranty card included in your product package or contact your retailer. For technical support, service, or inquiries regarding product operation, please reach out to your point of purchase or the manufacturer directly. Contact details can typically be found on the product packaging or the official FUZRR websvetainę.