STRICH SKT-02 Z-Style Piano Keyboard Stand and SPB-M50 Adjustable Bench Set User Manual

Įvadas

Thank you for choosing the STRICH SKT-02 Z-Style Piano Keyboard Stand and SPB-M50 Adjustable Bench Set. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new musical instrument accessories. Please read these instructions thoroughly before use and retain them for future reference.

Saugos informacija

• Ensure all components are securely fastened before placing any instrument on the stand or using the bench.
• Do not exceed the maximum load capacity of 200 lbs for the stand and 270 lbs for the bench.
• Smulkias dalis laikykite vaikams nepasiekiamoje vietoje, kad išvengtumėte užspringimo pavojaus.
• Naudokite ant stabilaus, lygaus paviršiaus, kad išvengtumėte apvirtimo.
• Regularly inspect all parts for wear and tear. Replace damaged components immediately.

Pakuotės turinys

Before beginning assembly, please verify that all parts listed below are present and undamaged.

• Z-Style Keyboard Stand (SKT-02) components
• Adjustable Piano Bench (SPB-M50) components
• Assembly hardware (screws, knobs, Allen wrench)
• Anti-slip rubber feet (optional for stand)
• Lockable caster wheels (pre-installed on stand)
• Secure straps for keyboard
• Ausinių kabliukas

1 paveikslas: Baigėsiview of all components included in the STRICH Piano Keyboard Stand and Bench Set.

Surinkimo instrukcijos

1. Piano Keyboard Stand Assembly (SKT-02)

1. Attach the horizontal support bar: Connect the main horizontal support bar between the two Z-shaped side frames. Secure it using the provided knobs, ensuring it is centered and stable.
2. Install the keyboard support arms: Attach the two upper keyboard support arms to the top of each Z-shaped frame. These arms feature rubber padding to protect your instrument.
3. Secure the headphone hook: Mount the headphone hook to one of the Z-shaped frames using the designated screw.
4. Choose your base: The stand comes with pre-installed lockable caster wheels for easy mobility. If you prefer a stationary setup, replace the wheels with the included anti-slip rubber feet by unscrewing the wheels and screwing in the feet.
5. Attach secure straps: Fasten the secure straps to the designated points on the stand's support arms. These straps will help hold your keyboard firmly in place.

2. Piano Bench Assembly (SPB-M50)

1. Attach the side frames: Connect the two H-shaped side frames to the central support bar using the provided screws and Allen wrench.
2. Secure the cushioned seat: Place the cushioned seat onto the assembled frame, aligning the screw holes. Fasten the seat securely using the provided screws and Allen wrench.
3. Install anti-slip rubber feet: Ensure the anti-slip rubber feet are securely attached to the bottom of each bench leg to prevent movement and protect your floor.

Naudojimo instrukcijos

1. Adjusting the Keyboard Stand (SKT-02)

The SKT-02 stand offers both height and width adjustments to accommodate various keyboard sizes (54-88 keys).

• Aukščio reguliavimas: Loosen the adjustment knobs on the vertical posts of the Z-frames. Slide the upper sections to your desired height, then tighten the knobs firmly to secure.
• pločio reguliavimas: Loosen the knob on the central horizontal bar. Slide the two Z-frames closer or further apart to match the width of your keyboard. Tighten the knob securely once adjusted.
• Securing the Keyboard: After placing your keyboard on the stand, use the provided secure straps to fasten it to the support arms, preventing accidental movement.
• Ausinių saugykla: Utilize the integrated headphone hook to keep your headphones conveniently stored when not in use.

2 paveikslas: Visual guide for adjusting the height and width of the keyboard stand and bench.

3 paveikslas: Close-up details of the stand and bench features, including adjustment knobs and securing mechanisms.

2. Adjusting the Piano Bench (SPB-M50)

The SPB-M50 bench features four height levels for optimal playing posture.

• Aukščio reguliavimas: Loosen the adjustment knobs on the bench legs. Pull out the pins, adjust the legs to one of the four desired height settings (46 cm to 54 cm), and reinsert the pins. Tighten the knobs firmly to lock the height.

Priežiūra ir priežiūra

• Valymas: Metalinius paviršius nuvalykite minkšta,amp cloth. For the cushioned seat, use a mild soap solution and a soft cloth, then wipe dry. Avoid abrasive cleaners.
• Patikra: Periodically check all screws, bolts, and adjustment knobs to ensure they are tight. Inspect rubber padding and feet for wear and replace if necessary.
• Saugykla: When not in use, the stand and bench can be adjusted to their most compact settings for convenient storage.

Trikčių šalinimas

Gaminio specifikacijos

4 paveikslas: Detailed product dimensions for both the keyboard stand and piano bench.

5 paveikslas: Illustration of the robust construction and load capacities of the stand and bench.

Garantija ir klientų aptarnavimas

STRICH products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included in your package or visit the official STRICH website. If you encounter any issues or have questions regarding your product, please contact STRICH customer support for assistance.

Daugiau informacijos ir kontaktinius duomenis galite rasti adresu STRICH Store on Amazon.