„Mytrix M16“ besvirtis žaidimų automatų valdiklis, naudotojo vadovas

Įvadas

Ačiū, kad pirkoteasing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai:

• Mytrix M16 Leverless Arcade Controller
• USB-C kabelis
• Klaviatūros traukiklis
• Vartotojo vadovas
• Extra Low Profile Red Switches (x2)
• Extra Keycaps (x2)

Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.

Sąranka ir suderinamumas

The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.

Sistemos reikalavimai

• Kompiuteris: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
• Konsolės: PS3, PS4, Nintendo Switch
• Mobile/Other: Android, iPadOS, MacOS
• Pastaba: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).

Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).

Pradinis ryšys

1. Connect the provided USB-C cable to the controller's USB-C port.
2. Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
3. The controller should be automatically recognized by most compatible systems.

Naudojimo instrukcijos

The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.

Valdymo režimai

The controller supports multiple input modes:

• X įvesties režimas
• Perjungti režimą
• PS3/D-input mode
• PS4 režimas
• Klaviatūros režimas

Button Layout and Key Values

Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.

Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.

Specialios funkcijos

• Turbo funkcija: Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
• SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web sąsaja.
• M1/M2 Custom Buttons: Two customizable buttons for advanced control.

RGB apšvietimas

The controller features customizable RGB lighting with 4 preset modes.

Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.

Custom RGB Lighting Controls

Adjust RGB lighting using the following button combinations:

• SELECT + START + X: Next Animation
• SELECT + START + Y: Previous Animation
• SELECT + START + A: Ryškumas aukštyn
• SELECT + START + B: Ryškumas sumažintas
• SELECT + START + RB: LED Parameter Up
• SELECT + START + RT: LED Parameter Down
• SELECT + START + LB: Pressed Parameter Up
• SELECT + START + LT: Pressed Parameter Down

Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.

Priežiūra ir pritaikymas

The Mytrix M16 is designed for easy maintenance and extensive customization.

Karštai keičiami jungikliai

The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.

• Jungiklio tipas: Gateron Low Profile Raudoni jungikliai
• Gyvenimo trukmė: 50 mln
• Įjungimo jėga: Maždaug 45 g
• Kelionės atstumas: 3.2 mm
• Įjungimo taškas: 1.5 mm

Vaizdas: Stambus planas view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.

Detachable 7-Layer Design

The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.

Vaizdas: Išsprogdintas view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.

DIY Screen & Artwork Support

Personalize your controller with custom artwork and screen displays.

Vaizdas: pvzamples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.

Bendras valymas

To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.

Trikčių šalinimas

This section addresses common issues you might encounter with your Mytrix M16 controller.

Ryšio problemos

• Controller not detected: Ensure the USB-C cable is securely connected to both the controller and the device. Try a different USB port or cable.
• No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web konfigūratorius.

Web Configuration Access

The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.

1. Laikykite PRADĖTI button while plugging the device into your computer.
2. The controller should enter a special mode, often displaying an IP address on its small screen.
3. Atidarykite a web browser on your computer and navigate to the displayed IP address.
4. If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.

Double Inputs or Unresponsive Buttons

• Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
• Nereaguojantys mygtukai: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.

Programinės aparatinės įrangos naujiniai

Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.

• Prieš atnaujinant: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
• Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
• Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.

Specifikacijos

Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.

Garantija ir palaikymas

Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.

• Klientų aptarnavimas: Refer to the Mytrix official webkontaktinę informaciją rasite savo svetainėje arba pirkimo platformoje.
• Garantija: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.