Įvadas
The DYNASTY PROAUDIO TMP-1 is a professional vacuum tube microphone preamplifier designed to enhance audio signals with warmth and clarity. It features a 12AX7 vacuum tube, 48V phantom power, and a built-in limiter, making it suitable for a variety of recording and live sound applications with both condenser and dynamic microphones, as well as instruments.
Saugos instrukcijos
- Prieš pradėdami dirbti, atidžiai perskaitykite visas instrukcijas.
- Saugokite įrenginį nuo lietaus ar drėgmės.
- Neatidarykite casing. Visus techninės priežiūros darbus patikėkite kvalifikuotiems darbuotojams.
- Užtikrinkite tinkamą vėdinimą, kad išvengtumėte perkaitimo.
- Use only the specified power adapter (AC 9V).
- Disconnect power before cleaning or when not in use for extended periods.
Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- TMP-1 profesionalus vakuuminio vamzdžio mikrofono išankstinis paruošimasampgyvybingesnis
- Power Adapter (AC 9V)
- Vartotojo vadovas (šis dokumentas)
Produktas baigtasview
The TMP-1 features a robust design with intuitive controls for optimal audio processing.
Šiame paveikslėlyje pavaizduotas kampinis view of the DYNASTY PROAUDIO TMP-1 Professional Vacuum Tube Microphone Preamplifier. The front panel with controls and indicators is visible, along with the sturdy black casing.
Šis paveikslėlis pateikia stambų planą view of the TMP-1's front panel. It clearly displays the "OUTPUT LEVEL" LED indicators, "Gain Input" and "Drive" rotary knobs, and push-buttons for "Phantom Power", "Limit", "Phase", and "Gain".
This image shows the rear panel of the TMP-1, highlighting the input and output connections. It includes XLR and 1/4-inch (6.35mm) input jacks, XLR and 1/4-inch (6.35mm) output jacks, and the AC 9V power input.
Priekinio skydelio valdikliai ir indikatoriai
- IŠĖJIMO LYGIO LED INDIKATORIAI: Indicators for signal level (-10, -5, 0, +3, +6dB Peak).
- Gain Input Knob: Adjusts the input gain from minimum to maximum.
- Drive Knob: Controls the amount of tube saturation/drive.
- Phantom Power Button (ON/OFF): Activates/deactivates 48V phantom power for condenser microphones.
- Limit Button (ON/OFF): Engages/disengages the built-in limiter to prevent clipping.
- Phase Button (Reverse/Normal): Reverses the phase of the input signal.
- Gain Button (+20dB/Normal): Provides an additional +20dB gain boost.
Galinio skydelio jungtys
- INPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) inputs for microphones or instruments.
- OUTPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) outputs for connecting to mixers, audio interfaces, or other audio devices.
- 9 V kintamoji srovė: Maitinimo įvestis pridedamam kintamosios srovės adapteriui.
Sąranka
- Maitinimo jungtis: Connect the supplied AC 9V power adapter to the "AC 9V" input on the rear panel of the TMP-1, then plug the adapter into a suitable power outlet.
- Įvesties jungtis:
- For microphones: Connect your microphone to either the XLR or 1/4-inch INPUT jack on the rear panel.
- For instruments: Connect your instrument (e.g., guitar, bass) to the 1/4-inch INPUT jack.
- Išvesties jungtis: Connect the TMP-1's XLR or 1/4-inch OUTPUT to your mixer, audio interface, or recording device's input.
- Pradiniai nustatymai: Before powering on, ensure the "Gain Input" and "Drive" knobs are set to their minimum positions. Ensure "Phantom Power" is OFF unless using a condenser microphone.
This image shows the TMP-1 preamplifier with various audio cables connected to its input and output jacks, demonstrating a typical setup.
Naudojimo instrukcijos
Įjungimas
Once all connections are made, power on the TMP-1. The "Power" LED on the front panel will illuminate.
Phantom Power naudojimas
If you are using a condenser microphone, press the Fantomo galia button to activate 48V phantom power. The corresponding LED will light up. Warning: Do not activate phantom power when using dynamic microphones or ribbon microphones, as this can cause damage.
Įvesties stiprinimo reguliavimas
Lėtai pasukite Gain Input knob clockwise to increase the input signal level. Monitor the "OUTPUT LEVEL" LEDs. Aim for the signal to primarily light up the -5 and 0 dB LEDs during normal operation, with occasional peaks into the +3 dB LED. Avoid consistently hitting the +6dB Peak LED, which indicates clipping.
Applying Drive (Tube Saturation)
The Vairuoti knob controls the amount of tube saturation. Turn it clockwise to add warmth and harmonic richness to your signal. Experiment with this control to find the desired sonic character.
Using the Limiter
Paspauskite Riba button to engage the built-in limiter. This helps prevent signal peaks from exceeding a certain level, protecting your recording equipment from clipping and providing a more consistent output level.
Fazės apsisukimas
The Fazė button allows you to reverse the phase of the input signal. This can be useful in multi-microphone setups to correct phase cancellation issues or for creative effects.
Additional Gain Boost
If your input signal is very low, you can press the Pelnas button to apply an additional +20dB gain boost. Use this judiciously to avoid introducing unwanted noise or distortion.
This image shows a close-up of a glowing vacuum tube, representing the 12AX7 tube inside the TMP-1 that provides its characteristic warmth.
This image features a professional condenser microphone in a studio environment, illustrating the type of microphone that benefits from the TMP-1's phantom power and preampsušvelninimas.
This image shows hands playing a bass guitar, demonstrating the TMP-1's versatility in handling instrument-level signals.
Priežiūra
- Valymas: Įrenginio išorę valykite minkštu, sausu skudurėliu. Nenaudokite skystų valiklių ar tirpiklių.
- Saugykla: Įrenginį laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Vamzdžio keitimas: The 12AX7 vacuum tube has a finite lifespan. If you notice a degradation in sound quality or increased noise over time, the tube may need replacement. This should be performed by qualified service personnel.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra galios | Power adapter not connected; faulty outlet; faulty adapter. | Check power connections; try a different outlet; test adapter if possible. |
| Nėra garso išvesties | Incorrect cable connections; gain too low; phantom power not engaged for condenser mic; faulty cable. | Verify all input/output cables are securely connected; increase Gain Input; activate Phantom Power for condenser mics; try different cables. |
| Iškraipytas garsas | Gain too high (clipping); faulty tube; incorrect impedance. | Reduce Gain Input; check OUTPUT LEVEL LEDs for clipping; if distortion persists, consult service for tube inspection; ensure proper impedance matching. |
| Dumbo ar triukšmo | Įžeminimo kilpa; sugedę kabeliai; trukdžiai iš kitų elektroninių prietaisų. | Use balanced cables; try isolating power; move unit away from other electronic devices; check for faulty cables. |
Specifikacijos
- Modelis: TMP-1
- Vamzdžio tipas: 12AX7 Vacuum Tube
- „Phantom Power“: +48V (perjungiamas)
- Įėjimai: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Išėjimai: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
- Maitinimas: AC 9V (included adapter)
- Gaminio matmenys: 9.5 x 6 x 3.5 colio (24.13 x 15.24 x 8.89 cm)
- Prekės svoris: 2.6 svaro (1.18 kg)
- Gamintojas: Dynasty Proaudio
- Pirmą kartą pasiekiama data: 19 m. rugpjūčio 2024 d
Garantija ir palaikymas
For warranty information and technical support, please contact DYNASTY PROAUDIO directly.
Visit the official DYNASTY PROAUDIO Store on Amazon for more information: DYNASTY PROAUDIO Store
Išsaugokite pirkimo įrodymą, kad galėtumėte kreiptis dėl garantijos.