SKINACT Bellage Electric Treatment Table (Chair)

Įvadas

Thank you for choosing the SKINACT Bellage Electric Treatment Table. This versatile and durable electric chair is designed for professional use in spa and medical environments, offering exceptional comfort and adjustability. Equipped with four independent electric motors, it allows for precise positioning of the backrest, leg rest, seat tilt, and overall height, ensuring optimal client comfort and practitioner convenience. This manual provides essential information for the safe and effective setup, operation, and maintenance of your new treatment table.

1 pav. Baigtaview of the SKINACT Bellage Electric Treatment Table with key features labeled.

Saugos informacija

Please read all safety warnings and instructions carefully before assembly and operation. Failure to do so may result in injury or damage to the product. Ensure the table is placed on a stable, level surface. Keep hands and loose clothing clear of moving parts during operation. Do not exceed the maximum weight capacity of 350 lbs. Disconnect power before performing any maintenance or cleaning.

Sąranka

1. Išpakavimas ir įdėjimas

• Atsargiai išimkite visus komponentus iš pakuotės.
• Place the base of the treatment table on a firm, level floor. Ensure there is sufficient clear space around the table for full range of motion and safe operation.
• Verify all leveling feet on the base are properly adjusted to ensure stability.

2. Komponentų surinkimas

• Attach Headrests: The Bellage table comes with two different headrests. Select the appropriate headrest for your procedure and securely attach it to the head section of the table. One headrest includes a breather hole for clients lying face down.
• Pritvirtinkite porankius: Slide the removable armrests into their designated slots on the sides of the main body of the chair.
• Foot Rest Extension: The foot rest section can be extended as needed.

Figure 2: The two interchangeable headrests provided with the table.

3. Maitinimo prijungimas

• Locate the power cord and plug it securely into the power input on the table's base.
• Plug the other end of the power cord into a grounded electrical outlet (100-120 volts, 50-60 hertz).

4. Nuotolinio valdymo pulto prijungimas

• Connect the remote control cable to the designated port on the underside of the table.

Figure 3: The wired remote control for the Bellage Electric Treatment Table.

Demonstracinio vaizdo įrašo sąranka

Video 1: A demonstration of the Bellage Electric Treatment Table's features and adjustments.

Naudojimo instrukcijos

The SKINACT Bellage Electric Treatment Table is operated using the wired remote control. Each button on the remote corresponds to a specific motor, allowing for independent adjustment of different sections of the table.

1. Maitinimo įjungimas/išjungimas

• Paspauskite Galia button (usually indicated by a circle with a vertical line) on the remote to turn the table on or off.

2. Aukščio reguliavimas

• Naudokite Rodyklės aukštyn/žemyn associated with the overall table icon to raise or lower the table's height. The height can be adjusted between 25.5 and 31.5 inches.

Figure 4: Electric height adjustment.

3. Adjusting Backrest Angle

• Naudokite Rodyklės aukštyn/žemyn associated with the backrest icon to adjust the backrest angle from 0° to 80° incline.

Figure 5: Electric backrest adjustment.

4. Adjusting Leg Rest Angle

• Naudokite Rodyklės aukštyn/žemyn associated with the leg rest icon to adjust the leg rest angle from 0° to 85° decline.

Figure 6: Electric leg rest adjustment.

5. Adjusting Bed Tilt Angle

• Naudokite Rodyklės aukštyn/žemyn associated with the full bed tilt icon to adjust the entire bed's tilt angle from 0° to 10°.

Figure 7: Electric bed tilt adjustment.

6. Memory Presets (P1, P2, P3)

• The remote control may feature preset buttons (P1, P2, P3) to save and recall preferred positions. Consult the remote's specific instructions for programming these presets.

Priežiūra

Regular maintenance ensures the longevity and optimal performance of your SKINACT Bellage Electric Treatment Table.

• Valymas: Wipe the surfaces of the table with a dry cloth. For deeper cleaning, use a mild, non-abrasive cleaner and a soft cloth. Avoid harsh chemicals or abrasive materials that could damage the upholstery or frame.
• Patikra: Periodically inspect all electrical cords, connections, and moving parts for any signs of wear, damage, or loose fittings. If any issues are found, discontinue use and contact customer support.
• Tepimas: The electric motors and moving mechanisms are generally maintenance-free. Do not attempt to lubricate internal components unless specifically instructed by a qualified technician.

Trikčių šalinimas

If you encounter any issues with your treatment table, refer to the following common troubleshooting steps:

Specifikacijos

Figure 8: Detailed dimensions of the treatment table.

Garantija ir palaikymas

„SKINACT Bellage“ elektrinis procedūrinis stalas tiekiamas su VIENERŲ METŲ GARANTIJA nuo įsigijimo datos. Ši garantija taikoma gamybos defektams ir gedimams įprasto naudojimo metu.

For technical support, warranty claims, or any questions regarding your product, please contact SKINACT customer service. Refer to your purchase documentation for specific contact details or visit the official SKINACT websvetainę.