LOLARAN GT1000
LOLARAN GT1000 Professional Metal Detector Instruction Manual
Modelis: GT1000
Brand: LOLARAN
1. Įvadas
This manual provides detailed instructions for the safe and effective use of your LOLARAN GT1000 Professional Metal Detector. Please read this manual thoroughly before operating the device to ensure proper assembly, optimal performance, and to prevent damage.

Image: The LOLARAN GT1000 Professional Metal Detector displayed with its accompanying accessories, such as headphones, a foldable shovel, and a carrying backpack.
The LOLARAN GT1000 is designed for detecting various metals, featuring a foldable design, waterproof search coil, and a rechargeable lithium battery for extended use.
2. Saugos informacija
- Prieš ieškodami privačioje valdoje, visada gaukite leidimą.
- Avoid searching in areas with buried utility lines, pipes, or electrical cables. Contact local authorities if unsure.
- Do not use the metal detector indoors, as household metals can cause false readings and interfere with operation.
- Kasdami būkite atsargūs, kad išvengtumėte sužalojimų ar turto sugadinimo.
- Saugokite įrenginį nuo ekstremalių temperatūrų ir tiesioginių saulės spindulių.
- The control unit and LCD display are not waterproof. Protect them from moisture. Only the search coil is waterproof.
- Išmeskite baterijas laikydamiesi vietinių taisyklių.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- LOLARAN GT1000 Metal Detector (main unit with search coil)
- Rechargeable Lithium Battery (pre-installed)
- Kuprinė
- Ausinės
- Foldable Shovel
- Pincetas
- USB įkrovimo laidas
- Vartotojo vadovas (šis dokumentas)
4. Sąranka
4.1. Surinkimas
The LOLARAN GT1000 features a foldable design for easy transport and storage. Follow these steps to assemble the detector for use:
- Extend the Shaft: Press the release button or latch to extend the telescopic shaft to your desired length. The adjustable length ranges from 26 to 49 inches (66 to 124 cm).
- Užfiksuokite skląstį: Ensure the latch is securely fastened to lock the shaft in place.
- Adjust Search Coil Angle: Loosen the knob on the search coil, adjust the coil to be parallel with the ground, and then tighten the knob to secure it.
- Attach Handle (if separate): If the handle is separate, align it with the main unit and secure it with the provided screw or locking mechanism.

Image: Assembly steps for the LOLARAN GT1000 metal detector, illustrating the extension of the shaft, securing the latch, and adjusting the search coil for operation.
4.2. Akumuliatoriaus įkrovimas
The metal detector is powered by a built-in 2000mAh rechargeable lithium battery. Ensure the battery is fully charged before first use.
- Suraskite USB įkrovimo prievadą valdymo bloke.
- Connect the provided USB charging cable to the detector and to a standard USB power source (e.g., wall adapter, power bank, computer USB port).
- The LCD display will indicate charging status. A full charge typically provides over 20 hours of continuous use.
- Atjunkite įkroviklį, kai akumuliatorius bus visiškai įkrautas.

Image: Illustration of the metal detector's rechargeable battery, showing its capacity, runtime, and USB charging capability.
5. Naudojimo instrukcijos
5.1. Maitinimo įjungimas/išjungimas
Press and hold the power button located on the control unit to turn the detector on or off. The blue-backlit LCD screen will illuminate upon activation.
5.2. LCD ekranas ir valdikliai
The large 3" x 2" LCD screen provides clear visibility of settings and detection information. Use the control buttons adjacent to the screen to navigate menus and adjust settings.
5.3. Veikimo režimai
The LOLARAN GT1000 offers six detection modes to suit various searching conditions and target preferences:
- ALL-METAL MODE: Detects all types of metal without discrimination. Ideal for general searching.
- DISKO REŽIMAS (diskriminacija): Allows you to set specific discrimination values to ignore unwanted metals (e.g., iron trash) and focus on desired targets.
- TAŠKUS APTARNAVIMO REŽIMAS: Used to precisely locate the exact position of a detected target in a small area, aiding in recovery.
- ATMINTINIS REŽIMAS: Stores specific metal types you wish to detect and will only respond to those programmed metals.
- JEWELRY MODE: Optimized for finding jewelry, typically by excluding iron targets.
- GOLD & SILVER MODE: Specifically configured to detect gold and silver, often by focusing on specific conductivity ranges.

Vaizdas: Viršview of the six distinct operating modes available on the LOLARAN GT1000, detailing their functions for targeted metal detection.
5.4. Jautrumo reguliavimas
The detector features 8 adjustable sensitivity levels. Higher sensitivity increases detection depth but may also increase susceptibility to electromagnetic interference. Adjust sensitivity based on environmental conditions and desired detection depth.
Typical detection depth ranges from 4 to 10 inches, varying with target size, composition, and ground mineralization.
5.5. Waterproof Search Coil
The 10-inch search coil is waterproof (IP57 rated), allowing for effective detection in shallow water, wet grass, or sandy beaches. Note: The control unit and LCD display are NOT waterproof and must be kept dry.

Image: Depiction of the metal detector's waterproof search coil being used in a shallow water environment, highlighting its capability for detecting submerged objects.
6. Priežiūra
- Valymas: Wipe the search coil and shaft with a damp cloth after each use, especially after use in wet or sandy conditions. Ensure the control unit remains dry.
- Saugykla: Fold the metal detector for compact storage in the provided backpack. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Akumuliatoriaus priežiūra: For long-term storage, charge the battery to approximately 50% every few months to maintain battery health.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Detektorius neįsijungia. | Baterija išsikrovusi. | Įkraukite akumuliatorių naudodami pateiktą USB laidą. |
| Nėra aptikimo arba silpni signalai. | Sensitivity too low; high ground mineralization; target too deep. | Increase sensitivity; try different operating modes; sweep slower. Note that deeper targets may be inconsistent. |
| Klaidingi signalai arba nereguliarus elgesys. | High sensitivity; electromagnetic interference (EMI) from power lines, other electronics; highly mineralized soil. | Reduce sensitivity; move away from sources of EMI; perform ground balance if available (not explicitly mentioned, but general advice); switch to DISC mode. |
| Difficulty understanding settings. | Learning curve with advanced features. | Refer to this manual for detailed explanations of each mode and setting. Practice in a controlled environment. |
8. Specifikacijos
| Modelio numeris | GT1000 |
| Prekės ženklas | LOLARAN |
| Maitinimo šaltinis | Įkraunama ličio baterija |
| Baterijos talpa | 2000 mAh |
| Baterijos veikimo laikas | Iki 20 valandų (nuolatinis naudojimas) |
| Veikimo dažnis | 7 KHz |
| Reguliuojamas ilgis | 26–49 coliai (66–124 cm) |
| Prekės svoris | 2.98 svarai (1.35 kg) |
| Paieškos ritė | 10-inch, Waterproof (IP57 rated) |
| Ekranas | 3" x 2" Blue Backlight LCD |
| Medžiaga | Metal (main components) |
| Spalva | Žalia |
9. Garantija ir palaikymas
The LOLARAN GT1000 Metal Detector comes with a 2 metų garantija nuo pirkimo datos, apimanti gamybos defektus. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.
For technical support, troubleshooting assistance, or warranty inquiries, please contact LOLARAN customer service through the retailer where the product was purchased or refer to the contact information provided on the product packaging or official LOLARAN websvetainę.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.