FOLAI Stud Finder Wall Scanner Model TH User Manual

1. Įvadas

The FOLAI Stud Finder Wall Scanner Model TH is an advanced electronic device designed to accurately detect various objects hidden behind walls, floors, and ceilings. This 5-in-1 scanner helps locate wood studs, metal pipes, steel bars, and live AC wires, ensuring safety and precision for your projects. Please read this manual thoroughly before use to ensure proper operation and to maximize the device's capabilities.

Image: The FOLAI Stud Finder Wall Scanner, showing its ergonomic design and the included 9V battery.

2. Produkto ypatybės

• 5 viename skenavimo režimai: Detects wood, metal, and live AC wires.
• Didelis tikslumas: Utilizes advanced sensor technology for precise detection.
• HD LCD ekranas: Clear visual indication of detected objects, edges, and center.
• Garso signalas: Provides audible alerts upon detection.
• Laidų įspėjimo aptikimas: Alerts to live, unshielded AC wires in all scanning modes.
• Automatinis kalibravimas: Simplifies setup and ensures reliable readings.

Image: Illustration of the internal microprocessor and the various materials the scanner can detect, including metal pipes, AC wires, wooden beams, and rebars.

3. Sąranka ir akumuliatoriaus įdėjimas

1. Atidarytas akumuliatoriaus skyrius: Locate the battery compartment cover on the back of the device. Slide or unclip the cover to open it.
2. Įdėkite bateriją: Insert one 9V alkaline battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. A 9V battery is included with your device.
3. Uždarykite akumuliatoriaus skyrių: Uždėkite baterijų skyriaus dangtelį, kol jis spragtelėdamas tvirtai užsifiksuos.

The device is now ready for initial use. It is recommended to perform a quick calibration before each scanning session.

4. Naudojimo instrukcijos

4.1 Bendrieji veikimo žingsniai

1. Maitinimas: Press the power button (usually marked with a power symbol or "U/MODE") to turn on the device.
2. Pasirinkite režimą: Use the mode button (often the same as the power button, or a separate one) to cycle through the available scanning modes until the desired mode is displayed on the LCD screen.
3. Kalibravimas: Place the device flat against the wall surface where you intend to scan. Press and hold the "Scan" button (typically on the side) until you hear a short beep sound, indicating successful calibration. Ensure there are no objects or your hand under the scanner during calibration.
4. Nuskaityti: While holding the "Scan" button, slowly and steadily slide the device horizontally across the surface. Maintain full contact with the wall.
5. Aptikimas: The LCD display will show indicators (e.g., arrows, bars, "EDGE", "CENTER") as it approaches and detects an object. An audio alarm will also sound.
6. Žymėjimas: Once the center of an object is indicated, mark its position with a pencil. For best accuracy, scan the area from both left and right directions and mark the center point where the readings converge.

Image: A visual guide demonstrating the four-step process for using the stud finder, from powering on and calibrating to scanning and marking detected objects.

4.2 Scanning Modes and Depths

The FOLAI Stud Finder offers five distinct scanning modes to accommodate various materials and depths:

• Stud Scan (0.5 inch / 12mm): Detects wood studs through a single layer of drywall up to 0.5 inches (12mm) thick.
• Stud Scan (1 inch / 25mm): Detects wood studs through a single layer of drywall up to 1 inch (25mm) thick.
• Deep Stud Scan (1.5 inches / 38mm): Designed for thicker walls, detecting wood studs through up to two layers of drywall, 1.5 inches (38mm) deep.
• Metal Scan (2.36 inches / 60mm): Locates metal objects such as pipes, rebar, and metal studs up to 2.36 inches (60mm) deep.
• AC Scan (2 inches / 51mm): Detects live, unshielded AC electrical wires up to 2 inches (51mm) deep.

Image: A visual representation of the five scanning modes, detailing the maximum detection depths for wood studs (0.5", 1", 1.5"), metal (2.36"), and live AC wires (2").

4.3 WireWarning Indicator

The WireWarning feature is always active in StudScan, DeepScan, and MetalScan modes. It alerts you to the presence of live, unshielded electrical AC wires up to 2 inches (51mm) deep, helping to prevent accidental drilling or cutting into electrical lines. If a live wire is detected, the AC warning icon will appear on the display, and an audio alarm will sound.

Svarbu: While WireWarning is a safety feature, it is always recommended to switch to AC Scan mode to precisely locate and confirm the center of any detected live AC wires before proceeding with any work.

Image: A user operating the stud finder, highlighting its ability to detect various hidden elements like studs, beams, metal, and AC wires, thereby enhancing safety during drilling tasks.

4.4 LCD Display and Audio Alarm

The large HD LCD display provides clear visual feedback:

• Signalo stiprumo juostos: Indicate proximity to the detected object. More bars mean closer proximity.
• Edge Indicators: Arrows or "EDGE" text appear when the device detects the edge of a stud or object.
• Centrinis indikatorius: "CENTER" text and a distinct icon appear when the device is directly over the center of a stud or object.
• Baterijos indikatorius: Rodo esamą baterijos lygį.
• Režimo indikatorius: Displays the currently selected scanning mode.
• AC Warning Icon: Appears when live AC wires are detected.

The audio alarm will beep continuously and change pitch as the device approaches and locates the center of an object, providing an additional cue for detection.

Paveikslėlis: greta view of the LCD display, demonstrating how it indicates the edge of a stud and then precisely pinpoints its center with clear visual cues.

5. Priežiūra ir priežiūra

• Baterijos keitimas: Replace the 9V battery when the low battery indicator appears on the LCD screen to ensure accurate readings. Always use a fresh alkaline 9V battery.
• Valymas: Nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių, tirpiklių ir nemerkite įrenginio į vandenį.
• Saugykla: Store the stud finder in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• Venkite lašų: Atsargiai elkitės su prietaisu, kad išvengtumėte pažeidimų dėl kritimų ar smūgių.

6. Problemų sprendimas

7. Specifikacijos

8. Garantija ir palaikymas

FOLAI is committed to providing high-quality products. This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or any questions regarding the operation of your Stud Finder Wall Scanner Model TH, please contact FOLAI customer service through the retailer's platform or the contact information provided with your purchase.

Išsaugokite pirkimo įrodymą, kad galėtumėte kreiptis dėl garantijos.