STRICH TEN BAND EQ

STRICH TEN BAND EQ Pedal vartotojo vadovas

Model: TEN BAND EQ

Įvadas

The STRICH TEN BAND EQ Pedal is a versatile 10-band equalizer effects pedal designed for electric guitar and bass. It allows precise tonal shaping across a wide frequency range, from 31.25Hz to 16kHz, with a gain/attenuation range of ±12dB for each band. Crafted from high-quality aluminum alloy, this pedal offers exceptional durability and ensures transparent, clean tonal quality thanks to its true bypass design.

STRICH TEN BAND EQ Pedal front view

1 pav.: priekis view of the STRICH TEN BAND EQ Pedal, showcasing the 10 frequency sliders and the master level slider, along with the footswitch and input/output jacks.

Pagrindinės savybės

  • Aukščiausios kokybės konstrukcija: Made from high-quality aluminum alloy for durability and a balanced weight distribution.
  • 10-Band Versatile Equalizer: Features ten independent frequency bands (31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 8KHz, 16KHz) plus an overall master level band.
  • ±12dB Gain / Attenuation: Each frequency band offers five quick-setting points at 0, ±6, and ±12dB for precise sound modulation.
  • Nešiojamas ir kompaktiškas: Designed for easy transport, ensuring resilience against accidental drops.
  • True Bypass Design: Ensures signal integrity, delivering transparent and clean tonal quality without unwanted noise or signal loss when the effect is disengaged.

Sąranka ir jungtys

Before operating the pedal, ensure all connections are secure and the power supply meets the required specifications.

  1. Maitinimas: The STRICH TEN BAND EQ Pedal requires a DC 9V adapter with a negative center and positive outside polarity. (Note: The power adapter is not included and must be purchased separately.)
  2. Įvesties jungtis: Connect your electric guitar or bass to the "INPUT" jack on the pedal using a standard 1/4-inch instrument cable.
  3. Išvesties jungtis: Prijunkite pedalo „OUTPUT“ lizdą prie savo amplifier, sound card, or other effects pedals using a standard 1/4-inch instrument cable.
  4. Maitinimas: Once all connections are made, connect the DC 9V power adapter to the pedal's power input. The pedal is now ready for use.
Analog Equalizer Pedal connection diagram

Figure 2: Diagram illustrating the connection points for the STRICH TEN BAND EQ Pedal, showing input from guitar/bass and output to amplifier/sound card, along with the power input jack.

Precautions for use and connection examples

Figure 3: Visual guide for correct connections and power supply considerations. It emphasizes connecting effects correctly and ensuring power supply compatibility.

Pedalo valdymas

The STRICH TEN BAND EQ Pedal provides precise control over your instrument's tone. Familiarize yourself with the sliders to sculpt your sound effectively.

  • Dažnio juostos: The pedal features ten horizontal sliders, each corresponding to a specific frequency band: 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 8KHz, and 16KHz. These cover the full spectrum of guitar and bass frequencies.
  • Gain/Attenuation Control: Each frequency slider allows you to boost or cut the signal for that specific frequency by up to ±12dB. The markings on the pedal indicate 0dB (flat), ±6dB, and ±12dB. Adjusting these sliders up will boost the frequency, while adjusting them down will cut it.
  • Lygio slankiklis: The "LEVEL" slider on the far right controls the overall output volume of the pedal. Use this to match the volume of your bypassed signal or to provide a volume boost for solos.
  • Tikras apėjimo kojinis jungiklis: The footswitch engages or disengages the equalization effect. When disengaged (bypassed), the pedal allows your instrument's signal to pass through without any tonal alteration, preserving the original tone.
Ten Horizontal Sliders for frequency adjustment

4 pav. Iš arti view of the ten horizontal sliders, each controlling a specific frequency band from 31.25 Hz to 16 kHz, allowing for precise tonal shaping.

12dB Increase Decrease Range illustration

Figure 5: Illustration demonstrating the ±12dB gain and attenuation range for each frequency band, with marked points at 0, ±6, and ±12dB.

Specifikacijos

Prekės ženklas STRICHAS
Modelis TEN BAND EQ
Stilius EQ ekvalaizeris
Gaminio matmenys (I x P x A) 3.54 colio x 2.16 colio x 4.88 colio (apytiksliai 9 cm x 5.5 cm x 12.4 cm)
Prekės svoris 0.28 kilogramo (maždaug 0.62 svarai)
ttage Reikalavimas DC 9V (Negative Center)
Dažnių juostos 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 8KHz, 16KHz
Gain/Attenuation Range ±12dB per band
Produkto matmenų diagrama

Figure 6: Diagram illustrating the physical dimensions of the STRICH TEN BAND EQ Pedal in centimeters and inches.

Priežiūra

To ensure the longevity and optimal performance of your STRICH TEN BAND EQ Pedal, follow these general maintenance guidelines:

  • Valymas: Use a soft, dry cloth to wipe down the pedal's exterior. Avoid using abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
  • Saugykla: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. When not in use for extended periods, disconnect it from power.
  • Tvarkymas: While the pedal is designed to be durable, avoid dropping it or subjecting it to harsh impacts. Handle cables carefully to prevent damage to jacks.

Trikčių šalinimas

If you encounter issues with your STRICH TEN BAND EQ Pedal, consider the following common troubleshooting steps:

  • No Power/No LED:
    • Įsitikinkite, kad nuolatinės srovės 9 V maitinimo adapteris yra tinkamai prijungtas ir veikia.
    • Verify that the power adapter has a negative center polarity.
    • Patikrinkite maitinimo lizdą.
  • Nėra garso / silpnas garsas:
    • Patikrinkite visus prietaiso laidus, ar jie tinkamai prijungti ir ar jie vientisi. Pabandykite sukeisti laidus vietomis.
    • Ensure your guitar and ampkeltuvai veikia tinkamai.
    • Verify that the "LEVEL" slider on the pedal is not set to minimum.
    • If using other pedals, try connecting the EQ pedal directly to the ampgelbėtojas, kad būtų galima išskirti problemą.
  • Nepageidaujamas triukšmas / ūžesys:
    • Ensure you are using a regulated DC 9V power supply specifically designed for guitar pedals.
    • Patikrinkite, ar jūsų sistemoje nėra įžeminimo kilpų.
    • Move the pedal away from power transformers or other sources of electromagnetic interference.

Garantija ir palaikymas

STRICH products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official STRICH website. If you require technical support or have questions not covered in this manual, please contact STRICH customer service through the details provided on their official channels or the retailer where you purchased the product.

Norėdami gauti daugiau informacijos ir produktų atnaujinimų, apsilankykite STRICH Store on Amazon.

© 2023 STRICH. All rights reserved.

Šis vadovas gali būti keičiamas be išankstinio įspėjimo.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.