1. Įvadas
The Ashly EcoTour™ 500.2 is a high-efficiency touring power amplifier designed for professional audio applications. It delivers 2 x 500W at 2/4 Ohms, 250W at 8 Ohms, and 1000W bridged at 70V. This amplifier is engineered for optimal performance, minimizing electricity usage, and reducing energy costs. This manual provides essential information for the safe and efficient operation of your EcoTour™ 500.2 ampgyvesnis.
2. Saugos informacija
Prieš naudodami šį įrenginį, perskaitykite ir supraskite visas saugos instrukcijas. Išsaugokite šį vadovą ateičiai.
- WARNING: RISK OF HAZARDOUS ENERGY. Refer to the operating manual for detailed safety procedures.
- ATSARGIAI: Kad sumažintumėte gaisro ar elektros smūgio pavojų, nelaikykite šios įrangos nuo lietaus ar drėgmės.
- Šis įrenginys atitinka FCC taisyklių 15 dalį. Naudojimui taikomos šios dvi sąlygos: (1) šis įrenginys negali sukelti žalingų trukdžių ir (2) šis įrenginys turi priimti bet kokius gaunamus trikdžius, įskaitant trikdžius, kurie gali sukelti nepageidaujamą veikimą.
- Užtikrinkite tinkamą vėdinimą, kad išvengtumėte perkaitimo. Neužblokuokite ventiliacijos angų.
- Always disconnect the power cord before performing any maintenance or making connections.
3. Produktas baigtasview
The Ashly EcoTour™ 500.2 is a robust and efficient power amplifier designed for professional touring and fixed installations. It features a durable 19-inch rack-mountable chassis.
3.1 Priekinio skydelio funkcijos
1 paveikslas: Front panel of the Ashly EcoTour™ 500.2 amplifier, showing the power switch on the left and individual channel gain controls with LED indicators on the right.
- Maitinimo jungiklis: Located on the left side of the front panel, used to turn the ampkeltuvas ON/OFF.
- Kanalų stiprinimo valdikliai: Individual rotary knobs for adjusting the volume/gain of each channel (CH-A, CH-B, CH-C, CH-D).
- LED indikatoriai: Each channel features LIMIT and SIG LEDs to indicate signal presence and clipping.
3.2 Galinio skydelio ypatybės
2 paveikslas: Rear panel of the Ashly EcoTour™ 500.2 amplifier, detailing input/output connections, DIP switches, and power input.
- Input Connectors (CH1/CH2): Dual XLR and 1/4-inch (TRS/TS) input jacks for each channel.
- Speaker Outputs (CH1/2, CH2): SpeakON connectors for speaker connections. Supports CH1 1+/-, CH2 2+/-, and Bridge 1+/2+.
- Bridge/Normal Switch: Selects between normal stereo operation and bridged mono operation for increased power output.
- DIP jungiklio nustatymai: Configurable switches for Front Panel Disable, High-Pass Filter (HPF), Limiter, and Gain settings (26dB, 32dB, 38dB, 1.4V).
- AC įvestis: Standard IEC power inlet for the detachable AC power cord.
- ttage parinkiklis: A switch to select between 115V and 230V operation for international use.
- Aušinimo ventiliatoriai: Two cooling fans provide front-to-rear airflow for thermal management.
4. Sąranka
Follow these steps to properly set up your Ashly EcoTour™ 500.2 ampgyvesnis.
- Išpakavimas: Atsargiai nuimkite amplifier from its packaging. Inspect for any signs of damage.
- Stovo montavimas: The amplifier is designed for 19-inch rack mounting. Secure it using appropriate rack screws. Ensure adequate space for airflow around the unit.
- ttage pasirinkimas: Before connecting to power, verify the voltagGaliniame skydelyje esantis pasirinkimo jungiklis yra nustatytas į tinkamą garsumo lygįtage jūsų regionui (115 V arba 230 V). Neteisingas ttagPasirinkimas gali sugadinti įrenginį.
- Įvesties jungtys: Prijunkite garso šaltinį (mikšerį, stiprintuvą)amplifier, etc.) to the CH1 and CH2 INPUTs on the rear panel using XLR or 1/4-inch cables.
3 paveikslas: Detail of input connector wiring (XLR and 1/4-inch) on the rear panel.
- Išvesties jungtys: Connect your speakers to the SPEAKER OUTPUTS using SpeakON cables. Ensure correct polarity.
4 paveikslas: Detail of SpeakON connector wiring on the rear panel.
- DIP jungiklio konfigūracija: Adjust the DIP switches on the rear panel according to your system requirements.
1 lentelė: DIP jungiklio nustatymai Nustatymas ĮJUNGTA padėtis OFF padėtis Išjungti priekinį skydelį Įjungta Išjungta HPF (aukšto dažnio filtras) Įjungta Išjungta Ribotojas Įjungta Išjungta Pelnas 26dB, 32dB, 38dB, 1.4V (per channel, specific switch combinations) Default/Other Gain Setting Refer to the detailed diagram on the rear panel for specific gain switch combinations.
- Maitinimo jungtis: Connect the supplied AC power cord to the AC Input on the rear panel and then to a suitable power outlet.
5. Naudojimo instrukcijos
Kartą amplifier is properly set up, follow these steps for operation.
- Maitinimas: Ensure all gain controls are set to minimum. Press the Power Switch on the front panel to turn on the amplifer. Užsidegs maitinimo indikatoriaus šviesos diodas.
- Koreguoti stiprinimą: Slowly increase the individual Channel Gain Controls (CH-A, CH-B, CH-C, CH-D) to achieve the desired output level.
- Monitoriaus šviesos diodai:
- SIG šviesos diodas: Šviečia, kai kanale yra garso signalas.
- LIMIT LED: Šviečia, kai amplifier is approaching or reaching its maximum output. Reduce the gain if this LED is constantly lit to prevent clipping and distortion.
- Bridge Mode (Optional): If higher power output is required for a single speaker, set the Bridge/Normal switch to BRIDGE. Ensure your speaker is rated for bridged operation and connected to the designated bridged output.
- Išjungti: Before powering off, reduce all gain controls to minimum. Then, press the Power Switch to turn off the ampgyvesnis.
6. Priežiūra
Reguliarus techninis aptarnavimas užtikrina jūsų prietaiso ilgaamžiškumą ir optimalų veikimą ampgyvesnis.
- Valymas: Naudokite minkštą, sausą šluostę, kad nuvalytumėte prietaiso išorę ampNenaudokite skystų valiklių ar tirpiklių.
- Vėdinimas: Ensure the cooling fans and ventilation grilles are free from dust and obstructions. Periodically clean the grilles with a soft brush or vacuum cleaner.
- Kabelių jungtys: Periodically check all input and output cable connections for secure fit and signs of wear.
- Saugykla: Jei saugote amplifier for an extended period, ensure it is in a dry, dust-free environment and protected from extreme temperatures.
7. Problemų sprendimas
Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti naudodami ampgyvesnis.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra galios | Power cord disconnected, outlet fault, voltage parinkiklis neteisingas. | Check power cord connection, try a different outlet, verify voltage selektoriaus nustatymas. |
| Nėra garso išvesties | Input/output cables disconnected, gain set to minimum, source device off, speaker fault. | Check all cable connections, increase gain, ensure audio source is active, test speakers. |
| Distorted sound / LIMIT LED constantly on | Input signal too high, amplifier overloaded, speaker impedance mismatch. | Reduce input signal level, lower channel gain, ensure speaker impedance matches ampgelbėtojo įvertinimas. |
| Perkaitimas | Blocked ventilation, excessive load. | Ensure clear airflow around the unit, reduce load, check fan operation. |
8. Specifikacijos
- Modelis: ECOTOUR500.2-120V-U
- Galia: 2 x 500W @ 2/4 Ohms, 250W @ 8 Ohms, 1000W bridged @ 70V
- Kanalai: 2
- Įvesties jungtys: XLR, 1/4-inch (TRS/TS)
- Išvesties jungtys: SpeakON
- ttage: 100-240VAC, 50/60Hz (selectable)
- Matmenys: 16 x 19 x 3.5 colio (40.64 x 48.26 x 8.89 cm)
- Prekės svoris: 18.5 svaro (8.39 kg)
- Savybės: Ultra High-Efficiency Amplification, Eco-friendly design, Stable down to 0.2 Ohms.
9. Garantija ir palaikymas
For warranty information or technical support, please contact Ashly customer service or visit the official Ashly websvetainę.
Ashly Store: Visit the Ashly Store on Amazon
10. Related Videos (Not Applicable)
No official product videos directly relevant to the Ashly EcoTour™ 500.2 amplifier were found in the provided data. Videos found were for a different product (MUSYSIC MU-D9600) and therefore not included.