MiBOXER TRI-PW 500W AC Triac Dimmer User Manual

1. Įvadas

The MiBOXER TRI-PW 500W AC Triac Dimmer is designed for precise control of lighting systems in residential and commercial environments. This device integrates WiFi and 2.4GHz technology, allowing for remote operation via compatible applications and MiBOXER remote controls. It supports triac dimming, ensuring compatibility with a wide range of lighting fixtures, including LED, halogen, and incandescent lights, for smooth and consistent dimming from full brightness to a soft glow.

1.1 vaizdas: Baigtaview of the MiBOXER TRI-PW 500W AC Triac Dimmer unit.

2. Saugos informacija

• Elektros instaliacija: Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis vietinių elektros kodeksų ir taisyklių.
• Maitinimo atjungimas: Always disconnect power at the circuit breaker before installing or servicing the dimmer.
• ttage Suderinamumas: Įsitikinkite, kad įvesties ttage matches the dimmer's specifications (100-240V AC).
• Apkrova: Do not exceed the maximum load capacity of 500W. Overloading can cause damage or fire.
• Naudoti tik patalpose: This device is intended for indoor use in dry locations. Avoid exposure to moisture or extreme temperatures.
• Suderinamumas: Use only with compatible dimmable lighting fixtures (LED, halogen, incandescent).

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi komponentai:

• MiBOXER TRI-PW 500W AC Triac Dimmer Unit
• User Manual (may be included as a separate document)

Image 3.1: MiBOXER TRI-PW Dimmer unit shown with its packaging and a user manual.

4. Produkto ypatybės

• Powerful 500W Capacity: Supports high-power loads, suitable for various lighting fixtures.
• Triac Dimming Technology: Provides flicker-free dimming for LED, halogen, and incandescent lights.
• WiFi & 2.4GHz Control: Integrates with WiFi and MiBOXER 2.4GHz systems for smartphone or remote control.
• Push Control Compatibility: Allows for quick, on-site dimming adjustments via a push button.
• Programėlė ir balso valdymas: Compatible with major smart home platforms for app-based and voice command control.
• Atminties funkcija: Retains previous lighting settings after power cycles.

5. Specifikacijos

Image 5.1: Technical drawing showing the approximate dimensions of the TRI-PW dimmer.

Image 5.2: Packaging dimensions for the MiBOXER TRI-PW dimmer.

6. Sąranka ir diegimas

Svarbu: Prieš pradėdami montuoti, įsitikinkite, kad maitinimas yra atjungtas nuo grandinės pertraukiklio.

Laidų schema

The MiBOXER TRI-PW dimmer supports two primary wiring methods for integration with a push switch. Both methods are suitable for triac dimming LED lights, traditional filament lamps, ir halogeno lamps.

Image 6.1: Wiring diagrams for connecting the MiBOXER TRI-PW dimmer with a push switch.

Method 1: Single-Wire Push Switch Connection

• Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
• Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
• Connect one wire from the push switch to the 'PUSH' terminal on the dimmer.
• Connect the other wire from the push switch to the Live (L) input terminal.

Method 2: Two-Wire Push Switch Connection

• Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
• Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
• Connect the two wires from the push switch directly to the 'PUSH' terminals on the dimmer.

After wiring, secure the dimmer in a suitable electrical box or enclosure. Restore power at the circuit breaker.

7. Naudojimo instrukcijos

7.1. Push Switch Control

• Trumpas paspaudimas: Turn the lights ON or OFF.
• Ilgas paspaudimas: Adjust the brightness level. Release the button to set the desired brightness.

7.2. WiFi App Control

The TRI-PW dimmer supports control via a smart app (e.g., Tuya Smart app). No additional 2.4G gateway is required for app control.

1. Download the compatible smart home app from your device's app store.
2. Prisiregistruokite arba prisijunkite prie savo paskyros.
3. Put the dimmer into pairing mode (refer to the app's instructions or the dimmer's specific pairing procedure, usually involving a long press of the 'SET' button or power cycling).
4. Follow the in-app instructions to add the device to your network.
5. Once connected, you can control the dimmer's ON/OFF state and brightness from your smartphone.

7.1 pav.: pvz.ample of controlling the dimmer using a smartphone application.

7.3. 2.4GHz Remote Control

The dimmer can be paired with MiBOXER 2.4GHz remote controls for direct wireless control.

1. Ensure the dimmer is powered on.
2. Refer to your MiBOXER 2.4GHz remote control's manual for specific pairing instructions. Typically, this involves pressing a "Link" or "Pair" button on the remote within a few seconds of powering on the dimmer or pressing the dimmer's 'SET' button.
3. A successful pairing is usually indicated by the connected light flashing.

7.4. Balso valdymas („Alexa“ / „Google Assistant“)

The TRI-PW dimmer is compatible with smart home voice assistants like Amazon Alexa and Google Assistant when integrated through a compatible smart home app.

1. Ensure your dimmer is successfully connected to the smart home app (e.g., Tuya Smart).
2. Atidarykite „Amazon Alexa“ arba „Google Home“ programėlę.
3. Enable the skill or service for the smart home app you are using (e.g., "Tuya Smart" skill).
4. Discover devices. Your dimmer should appear in the list.
5. Assign a name to your dimmer (e.g., "Living Room Light").
6. You can now control your light using voice commands, such as "Alexa, turn on Living Room Light" or "Hey Google, dim Living Room Light to 50%."

Image 7.2: The dimmer is compatible with voice control platforms like Amazon Alexa and Google Assistant.

8. Priežiūra

• Valymas: Disconnect power before cleaning. Wipe the dimmer with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Patikra: Periodiškai tikrinkite laidų jungtis, ar nėra tvirtumo ir nusidėvėjimo ar pažeidimų požymių.
• Firmware atnaujinimai: If available, check the smart home app for firmware updates to ensure optimal performance and security.

9. Problemų sprendimas

10. Garantija ir palaikymas

This MiBOXER TRI-PW dimmer comes with a 2 metų garantija nuo pirkimo datos. Ši garantija apima medžiagų ir gamybos defektus normaliai naudojant.

The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or acts of nature.

For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase receipt and product model number (TRI-PW) available when contacting support.

Daugiau informacijos galite rasti adresu „MiBOXER“ parduotuvė „Amazon“ platformoje.