Graco EasyTurn 360 2-in-1

„Graco EasyTurn 360 2-in-1“ transformuojamos automobilinės kėdutės naudojimo instrukcija

Model: EasyTurn 360 2-in-1

1. Produktas baigtasview

The Graco EasyTurn 360 2-in-1 Convertible Car Seat is designed for safety and convenience, accommodating children from infancy through toddlerhood. It features a unique 360-degree rotation for easy access, two modes of use (rear-facing and forward-facing), and Graco's SnugLock technology for secure installation.

Graco EasyTurn 360 2-in-1 Convertible Car Seat in Solae color

Figure 1: Graco EasyTurn 360 2-in-1 Convertible Car Seat.

Pagrindinės funkcijos:

  • 360 laipsnių sukimasis: Allows for easy loading and unloading of your child in both rear-facing and forward-facing modes.
  • 2 Modes of Use: Supports rear-facing harness for children 4-40 lb and forward-facing harness for children 26.5-65 lb.
  • SnugLock Technology: Provides quick and secure installation using either the vehicle seat belt or LATCH system.
  • No-Rethread Simply Safe Adjust Harness System: Adjusts the 10-position headrest and harness simultaneously for a proper fit.
  • 4 atlošo padėčių: Ensures comfort for your child and aids in correct installation.
  • Plonas dizainas: Optimizes backseat space without compromising safety or comfort.
  • Graco ProtectPlus Engineered: Tested to meet or exceed US safety standards for frontal, side, rear, and rollover impacts.
  • Integruoti puodelių laikikliai: Two easy-to-clean cup holders for drinks and snacks.
  • Plush Infant Inserts: Removable head and body supports for infant comfort.
  • Fuss-Free Harness Storage: Pockets to keep the harness out of the way for easy access.

2. Sąranka ir diegimas

Proper installation is crucial for your child's safety. Always refer to your vehicle's owner's manual and the car seat manual for complete instructions.

2.1 Preparing the Car Seat

  • For forward-facing use, remove the plush infant head and body supports. These are for rear-facing use only.
  • Ensure the car seat is rotated to the rear-facing position before beginning installation. Slide and hold the blue trigger, then pull out the gray lever and rotate the seat until the turn-lock indicator is green.
  • Store the lower anchor connectors in the designated compartment in the seat base if using the vehicle seat belt for installation.
  • Unhook the tether strap from its storage and lay it over the anti-rebound panel. It will be attached later.

2.2 Rear-Facing Installation (4-40 lb)

Place the car seat rear-facing in your vehicle. Ensure the base is flat on the vehicle seat, with at least 80% of the base on the seat.

  • Adjust the recline to one of the rear-facing positions (1-4) using the recline handle on the front of the base. The level indicator on the side of the base should be within the blue zone.
  • Open the SnugLock lock-off by pulling the gray lever.
  • Route the vehicle lap and shoulder belt through the designated belt path, ensuring it is flat and untwisted. Buckle the seat belt.
  • Remove slack from the vehicle seat belt by pulling on the shoulder belt while feeding the slack back into the retractor.
  • Close the SnugLock lock-off firmly until you hear a click.
  • Test for tightness: The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.

2.3 Forward-Facing Installation (26.5-65 lb)

Place the car seat forward-facing in your vehicle. Ensure the base is flat on the vehicle seat, with at least 80% of the base on the seat.

  • Adjust the recline to one of the forward-facing positions (1-4) using the recline handle on the front of the base. The level indicator on the side of the base should be within the red zone.
  • Open the SnugLock lock-off by pulling the gray lever.
  • Route the vehicle lap and shoulder belt through the designated belt path, ensuring it is flat and untwisted. Buckle the seat belt.
  • Remove slack from the vehicle seat belt by pulling on the shoulder belt while feeding the slack back into the retractor.
  • Close the SnugLock lock-off firmly until you hear a click.
  • Attach the tether strap to the vehicle's top tether anchor and tighten to remove all slack.
  • Test for tightness: The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.

Video 1: Graco EasyTurn 360 - Forward Facing Seat Belt Installation. This video demonstrates the steps for installing the car seat in a forward-facing position using the vehicle's seat belt.

3. Automobilinės kėdutės valdymas

3.1 360 laipsnių sukimasis

The EasyTurn 360 allows you to rotate the car seat for effortless loading and unloading of your child.

  • To rotate, slide and hold the blue trigger located on the side of the base.
  • While holding the trigger, pull out the gray lever and turn the car seat towards the vehicle door.
  • Place your child in the seat and secure the harness.
  • Rotate the seat back to its rear-facing or forward-facing position until you hear a distinct "click." The turn-lock indicator on the side of the base should be green, confirming it is securely locked for travel.
Parent easily placing a child into the Graco EasyTurn 360 car seat rotated towards the door.

Figure 2: Easy ins and outs with 360-degree rotation.

Graphic showing a parent rotating the Graco EasyTurn 360 car seat to place a child, highlighting the 360-degree rotation feature.

Figure 3: Easy ins and outs with 360-degree rotation.

3.2 Diržo reguliavimas

The No-Rethread Simply Safe Adjust Harness System allows you to adjust the harness and headrest height simultaneously.

  • To adjust the harness height, squeeze the handle at the top of the headrest and slide it up or down to the appropriate position. The harness straps should be at or just below your child's shoulders for rear-facing, and at or just above for forward-facing.
  • To loosen the harness, press the harness release button located at the front of the seat and pull the shoulder straps forward.
  • To tighten the harness, pull the harness adjustment strap until the harness is snug against your child's body. Ensure you cannot pinch any excess webbėrimas ant vaiko peties.

3.3 Atlošo padėtys

The car seat offers 4 recline positions to ensure comfort and proper installation angle.

  • Pull the recline handle located on the front of the base to adjust the recline angle.
  • Refer to the level indicator on the side of the base to ensure the correct recline position for rear-facing (blue zone) or forward-facing (red zone).
Graco EasyTurn 360 car seat showing a baby in rear-facing mode and a toddler in forward-facing mode.

Figure 4: Two modes of use: Rear-Facing (4-40 lb) and Forward-Facing (26.5-65 lb).

Graphic illustrating the Graco EasyTurn 360 car seat transitioning from rear-facing with an infant to forward-facing with a toddler, emphasizing its growth with the child.

Figure 5: The car seat grows with your child, offering two stagnaudojimo.

4. Priežiūra ir valymas

Reguliarus automobilio kėdutės valymas užtikrina jos ilgaamžiškumą ir higieną.

  • Sėdynės padas: The seat pad is machine washable on a delicate cycle with cold water. Do not use bleach. Tumble dry on low heat.
  • Dirželiai: Nuvalykite diržų dirželius reklamaamp audiniu. Neskalbkite skalbimo mašinoje ir nemerkite į vandenį, nes tai gali susilpninti dirželius.
  • Sagtis: Clean the buckle by placing it in a cup of warm water and gently agitating. Do not use soaps or detergents.
  • Plastikinės ir metalinės dalys: Wipe plastic and metal parts with mild soap and cool water.
  • Puodelių laikikliai: The two integrated cup holders are removable for easy cleaning.

5. Problemų sprendimas

If you encounter any issues with your Graco EasyTurn 360 car seat, please refer to the following common solutions or contact customer support.

  • Automobilio sėdynė atsilaisvino po montavimo: Ensure the SnugLock lock-off is fully closed and you have removed all slack from the vehicle seat belt or LATCH strap. Re-test for tightness; movement should not exceed 1 inch.
  • Diržus sunku įtempti / atlaisvinti: Check that the harness straps are not twisted. Ensure the harness release button is fully pressed when loosening.
  • Sėdynė nesisuka sklandžiai: Verify that there are no obstructions around the base of the seat. Ensure the blue trigger and gray lever are fully engaged during rotation.
  • Turn-Lock Indicator Not Green: This indicates the seat is not securely locked in position for travel. Re-engage the rotation mechanism until a click is heard and the indicator turns green.

6. Specifikacijos

FunkcijaSpecifikacija
Prekės ženklasGraco
ModelisEasyTurn 360 2-in-1
Rear-Facing Harness Weight4-40 svarai
Forward-Facing Harness Weight26.5-65 svarai
Didžiausio svorio rekomendacija65 svaro
Maximum Height Recommended49 colių
Diegimo tipasLATCH, Vehicle Seat Belt
Diržų tipas5 taškų
Aukščio pozicijų skaičius10
Elemento matmenys (D x P x A)20.2 "D x 17" P x 25.5" A
Prekės svoris30.82 svaro
Medžiagos tipasPoliesteris
UPC047406191208

7. Garantija ir palaikymas

Graco products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product packaging or visit the official Graco websvetainę.

Klientų aptarnavimas:

If you have questions, require assistance with installation, or need to report a safety concern, please contact Graco customer service:

Visada užregistruokite savo automobilinę kėdutę, kad gautumėte svarbius saugos pranešimus ir informaciją apie atšaukimą.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.