Tunze Turbelle NanoStream 6040.005 HUB Edition Instruction Manual

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Tunze Turbelle NanoStream 6040.005 HUB Edition. This high-performance stream pump is designed for aquariums ranging from 20 to 500 liters (5.3 to 132 USgal.), offering adjustable flow rates and smart control capabilities.

The Turbelle NanoStream 6040.005 HUB Edition is equipped with a WIFI/Cloud-based controller (Turbelle Controller 7020) for precise flow management and features a compact design for easy integration into your aquarium.

2. Saugos instrukcijos

Always disconnect the power supply before performing any maintenance or installation work on the pump.
Ensure the power supply unit is placed in a dry area, away from water splashes.
Nenaudokite siurblio, jei pažeistas maitinimo laidas ar kuri nors kita įrenginio dalis.
Šis prietaisas skirtas naudoti tik patalpose ir akvariumuose.
Laikyti vaikams nepasiekiamoje vietoje.
The pump must be fully submerged during operation.

3. Pakuotės turinys

Prašome patikrinti, ar pakuotėje yra visi reikalingi daiktai:

Tunze Turbelle NanoStream 6040.005 Pump
Turbelle Controller 7020 (WIFI/Cloud-based)
Power Supply Unit (100-240V / 50-60Hz)
Magnet Holder (for glass thickness up to 12 mm / 1/2”)
Srauto deflektorius
Instrukcijų vadovas

4. Sąranka ir diegimas

Follow these steps to properly install your Turbelle NanoStream 6040.005 pump:

4.1. Siurblio padėties nustatymas

Tunze Turbelle NanoStream 6040.005 pump mounted on aquarium glass with magnet holder

Image: The Turbelle NanoStream 6040.005 pump securely mounted to the aquarium glass using its magnet holder.

Pasirinkite vietą: Select a position in your aquarium where the pump can create optimal water flow without disturbing substrate or corals excessively. Ensure the pump is fully submerged.
Attach Magnet Holder: Place the pump unit inside the aquarium and align the external magnet holder on the outside of the glass. The strong magnets will secure the pump in place. The magnet holder is suitable for glass thicknesses up to 12 mm (1/2 inch).
Sureguliuokite kryptį: The pump's outlet can be rotated to direct the water flow as desired.

4.2. Valdiklio prijungimas

Tunze Turbelle Controller 7020 with various buttons and display for flow control

Image: The Tunze Turbelle Controller 7020, showing its interface for adjusting pump settings and modes.

Connect Pump to Controller: Plug the pump's cable into the designated port on the Turbelle Controller 7020.
Prijunkite maitinimo šaltinį: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
Pradinis įjungimas: The pump will perform a brief self-test upon initial power-up.

5. Naudojimo instrukcijos

The Turbelle NanoStream 6040.005 is controlled via the Turbelle Controller 7020, offering various modes and settings.

5.1. Valdiklis perview

Tunze Turbelle Controller 7020 with buttons for Food Timer, Manual, Cloud, Analog, Mode, Wave Search, Min Power, Pulse Duration, Max Power

Vaizdas: Išsamus view of the Tunze Turbelle Controller 7020, highlighting its control functions.

The controller allows you to adjust flow rate, set wave patterns, and utilize special functions like the food timer.

5.2. Pagrindinė operacija

Režimo pasirinkimas: Use the "Mode" button to cycle through different operating modes (e.g., Constant, Pulse, Wave).
Srauto reguliavimas: Use the "+" and "-" buttons to increase or decrease the flow rate in Constant mode, or to adjust pulse intensity/duration in other modes.
Food Timer: Press the "Food Timer" button to temporarily stop the pump for approximately 10 minutes, allowing fish to feed undisturbed. The pump will automatically resume operation after the timer expires.
Wave Search: The "Wave Search" function helps to find the optimal wave frequency for your aquarium.

5.3. WIFI/Cloud Control

The HUB Edition features WIFI/Cloud-based control. Refer to the separate Tunze app manual for detailed instructions on connecting your controller to your home network and managing it remotely via the cloud.

6. Priežiūra

Regular maintenance ensures optimal performance and longevity of your Turbelle NanoStream pump.

6.1. Siurblio valymas

Tunze Turbelle NanoStream 6040.005 pump disassembled for cleaning, showing impeller and housing

Image: The Turbelle NanoStream 6040.005 pump, illustrating its components for easy disassembly and cleaning.

Atjunkite maitinimą: Always unplug the pump from the power outlet before cleaning.
Remove from Aquarium: Carefully remove the pump from the aquarium.
Išardyti: Gently detach the flow deflector and the protective cage. The impeller can then be carefully removed.
Švarūs komponentai: Use a soft brush and warm water to remove algae, calcium deposits, and other debris from all pump components, especially the impeller and its housing. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
Surinkti iš naujo: Reassemble the pump in reverse order, ensuring all parts are correctly seated.
Dažnis: Clean the pump every 1-3 months, depending on the amount of debris and algae in your aquarium.

6.2. Kabelių apžiūra

Periodically inspect the power cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact Tunze support.

7. Problemų sprendimas

Štai keletas dažniausiai pasitaikančių problemų ir jų sprendimo būdų:

Problema	Galima priežastis	Sprendimas
Pump not starting or weak flow.	Nėra maitinimo. Darbaratis užblokuotas šiukšlėmis. Air trapped in the pump. Controller settings too low.	Patikrinkite maitinimo jungtis. Atjunkite maitinimą, išimkite siurblį, išvalykite sparnuotę ir korpusą. Gently shake the pump while submerged to release air. Increase flow setting on the controller.
Pump making unusual noise.	Impeller dirty or damaged. Siurblys nėra visiškai panardintas. Vibrations against aquarium glass.	Clean or inspect impeller for damage. Replace if necessary. Įsitikinkite, kad siurblys yra visiškai panardintas. Adjust pump position or use the included Silence Clamp (if applicable) to reduce vibrations.
Valdiklis nereaguoja.	Maitinimo problema. Valdiklio gedimas.	Patikrinkite maitinimo jungtis su valdikliu. Try resetting the controller by unplugging and replugging the power. If issues persist, contact support.

8. Specifikacijos

Modelis	Tunze Turbelle NanoStream 6040.005 HUB Edition
Prekės modelio numeris (vidinis)	6095.005
Akvariumo dydis	20 to 500 liters (5.3 to 132 USgal.)
Srauto greitis	Approx. 200 to 4,500 l/h (53 to 1,190 USgal./h)
Energijos suvartojimas	1.5–13 m. vakarai
Maitinimo blokas	100-240V / 50-60Hz
Kabelio ilgis	3 m (118 colių)
Dimensions (without flow deflector and Magnet Holder)	60 x 43 x 68 mm (2.36 x 1.69 x 2.68 colio)
Išleidimo angos skersmuo	ø40 mm (1.57”)
Magnet Holder Glass Thickness	Up to 12 mm (1/2”)
Medžiaga	Plastikiniai
Spalva	Black/Blue/White
Prekės svoris	2.75 svaro

9. Garantija

The Tunze Turbelle NanoStream 6040.005 HUB Edition comes with a 5 metų garantija from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.

10. Pagalba ir kontaktinė informacija

For further assistance, technical support, or warranty inquiries, please contact Tunze customer service or visit the official Tunze websvetainę.

Palaikymas internetu: Visit the Tunze Store on Amazon

Kreipdamiesi į palaikymo tarnybą, turėkite po ranka savo gaminio modelio numerį (6040.005) ir pirkimo datą.

Tunze 6040.005