Philips ICN-2S28-N Centium Electronic Ballast Instruction Manual

1. Įvadas

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Philips ICN-2S28-N Centium Electronic Ballast. This ballast is designed for use with two F28T5, F21T5, or F14T5 fluorescent lamps, and can also operate single lamps. Please read this manual thoroughly before installation and retain it for future reference.

2. Saugos informacija

ĮSPĖJIMAS: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power at the circuit breaker before installation or servicing.

• Užtikrinkite maitinimo šaltinio ttage matches the ballast's rated voltage (120V arba 277V).
• The ballast case must be properly grounded.
• Kalnas lamps within 1/4 inch of a grounded metal reflector.
• Maksimalus tūristage for RED-BLUE leads is 500 Vrms.
• Insulate YELLOW leads for 600V.
• Only use rapid-start sockets with this ballast.
• Do not modify the ballast or its wiring.
• This ballast is a Semi-Conducteur, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, with Inherent Thermal Protection. It contains no PCB's.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• 1 x Philips ICN-2S28-N Centium Electronic Ballast

Image 1: Philips ICN-2S28-N Centium Electronic Ballast with its integrated wiring.

4. Sąranka ir diegimas

Norėdami tinkamai sumontuoti balastą, atlikite šiuos veiksmus:

1. Atjunkite maitinimą: Before starting any work, ensure the main power supply to the fixture is turned off at the circuit breaker.
2. Mount the Ballast: Securely mount the Philips ICN-2S28-N ballast within the fixture. Ensure the ballast case is grounded.
3. Laidų jungtys: Refer to the wiring diagram on the ballast label and the instructions below.

2 pav.: Išsamus view of the ballast label, including wiring diagram and technical specifications.

Wiring Diagram Details:

• Input Power (120V or 277V):
  • Prijunkite JUODAS laidą prie linijos (L) įvesties.
  • Prijunkite BALTAS laidą prie neutralios (N) įvesties.
• Lamp Connections (for 2 Lamps):
  • Prijunkite MĖLYNA wires to one end of each lamp.
  • Prijunkite RAUDONA wires to the other end of each lamp.
  • Prijunkite GELTONA wires to the remaining terminals of the lamps.
• Įžeminimas: Ensure the ballast case is properly grounded to the fixture's metal housing.

Svarbios pastabos:

• This ballast is compatible with (2) F28T5, (2) F21T5, and (2) F14T5 lamps. It also works for single lamps.
• Kalnas lamps within 1/4 inch of a grounded metal reflector for optimal performance and safety.
• Insulate any unused YELLOW leads for 600V.
• Only use rapid-start sockets.

Image 3: The ballast with its color-coded wires clearly visible for connection.

5. Operacija

Once the Philips ICN-2S28-N Centium Electronic Ballast is correctly installed and wired, operation is straightforward:

1. After completing the installation, restore power to the circuit at the breaker.
2. Turn on the light switch connected to the fixture. The ballast will automatically ignite and regulate the power to the fluorescent lamps.
3. The ballast is designed for programmed start, ensuring optimal lamp gyvenimą.

6. Priežiūra

The Philips ICN-2S28-N Centium Electronic Ballast is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure continued performance:

• Maitinimo atjungimas: Prieš atlikdami bet kokią techninę priežiūrą ar patikrinimą, visada atjunkite maitinimą.
• Valymas: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, soft cloth for cleaning.
• Laidų patikrinimas: Periodically inspect wiring connections for any signs of wear, fraying, or loose connections. Ensure all connections remain secure.
• Lamp Pakeitimas: Keičiant lamps, ensure they are of the correct type and wattage as specified for this ballast (F28T5, F21T5, F14T5).
• Aplinkos sąlygos: Ensure the ballast operates within its specified temperature range and environmental conditions (Type 1 Outdoor).

7. Problemų sprendimas

If your fluorescent fixture is not operating correctly, consult the following troubleshooting guide:

Jei trikčių šalinimo veiksmai neišsprendžia problemos, kreipkitės į kvalifikuotą elektriką arba „Philips“ klientų aptarnavimo tarnybą.

8. Specifikacijos

Below are the technical specifications for the Philips ICN-2S28-N Centium Electronic Ballast:

• Modelio numeris: ICN-2S28-N
• Prekinis ženklas: PHILIPS (Advance Ballast)
• Įvesties tomastage: 120V / 277V
• Suderinamas Lamps: (2) F28T5, (2) F21T5, (2) F14T5 (also works for single lamps)
• Vattage: 28 watts (for F28T5 lamps)
• Šviesos šaltinio tipas: Fluorescencinis
• Maitinimo šaltinis: Su laidu elektra
• Medžiaga: Plastikiniai
• Spalva: Juoda
• Forma: Stačiakampis
• Apdailos tipas: Juoda
• Montavimo tipas: Stovo laikiklis
• Prekės svoris: 9.6 uncijos
• Prekės matmenys (I x P x A): 9.5" x 1.25" x 1"
• UPC: 781087080726
• Sertifikatai: UL Listed 704G, CSA (NRTL/C)
• Savybės: IntelliVolt (120V to 277V 50/60Hz), Programmed Start, High Power Factor, Class P, Sound Rated A, Type 1 Outdoor, Inherent Thermal Protection, No PCB's.

4 paveikslėlis: Šonas view of the ballast, illustrating its compact dimensions and mounting points.

9. Garantija ir palaikymas

This Philips ICN-2S28-N Centium Electronic Ballast comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Philips customer support.

For technical assistance or support, please contact Philips directly. Technical information is often available via their official websvetainėje arba paskambinę jų palaikymo linija.

• Gamintojas: Advance Ballast (a Philips company)
• Techninė informacija: 1.800.372.3331 (as seen on product label)
• Palaikymas internetu: Apsilankykite oficialioje „Philips“ svetainėje website for product support and resources.