HPBS 5000A padangų pripūtimo ir 3000A automobilio užvedimo įrenginio naudotojo vadovas

Įvadas

Thank you for choosing the HPBS 5000A Tire Inflator and 3000A Car Jump Starter. This comprehensive device is designed to provide reliable roadside assistance for various vehicles, combining the essential functions of a powerful jump starter, a precise tire inflator, an LED flashlight, and a portable power bank. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Image: The HPBS 5000A Tire Inflator (right) and 3000A Car Jump Starter (left) shown together, highlighting their compact design.

Saugos informacija

Visada laikykitės šių saugos priemonių, kad išvengtumėte sužalojimų ar įrenginio bei transporto priemonės sugadinimo:

• Prietaisą laikykite vaikams nepasiekiamoje vietoje.
• Nelaikykite prietaiso lietuje ar ekstremalioje temperatūroje.
• Užtikrinkite tinkamą vėdinimą veikimo ir įkrovimo metu.
• Nebandykite ardyti ar modifikuoti įrenginio.
• Naudokite tik pateiktus priedus ir laidus.
• Venkite užvedimo jungiklio trumpojo jungimoamps.
• Wear eye protection when operating the jump starter.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.

Paveikslėlis: 10 įmontuotų saugos apsaugos funkcijų, įskaitant atsparumą kibirkštims, perkrovą, per didelę srovę, trumpąjį jungimą, perkaitimą, ekstremalią temperatūrą, per didelę įtampą, vaizdinis vaizdas.tage, reverse connection, reverse polarity, and over-discharge protection.

Produktas baigtasview

Komponentai ir savybės

The HPBS 5000A Tire Inflator and 3000A Car Jump Starter are designed for versatility and ease of use.

3000A lengvojo automobilio starteris

• EC5 išvesties prievadas: For connecting smart jump cables.
• ĮJUNGIMO/IŠJUNGIMO mygtukas: Maitina įrenginį.
• LED žibintuvėlis: Provides illumination with Normal, Strobe, and SOS modes.
• USB Output Ports (USB1, USB2): Skirta išoriniams įrenginiams įkrauti.
• USB-C įvesties prievadas: Užvedimo įrenginio įkrovimui.
• Indikacinės lemputės: Show battery level and status.
• Skaitmeninis ekranas: Rodo akumuliatoriaus procentątage.

Vaizdas: Stambus planas view of the 3000A Jump Starter, labeling the EC5 Output Port, ON/OFF Button, LED Flashlight, USB Output 1, USB-C Input, USB Output 2, and Indicator Lights.

5000A Tire Inflator

• Inflator Interface: For connecting the air hose.
• Star Output Port: (Likely a DC output for specific accessories, or mislabeled from jump starter)
• Ekranas: Shows current pressure, target pressure, and unit.
• Preset Air Pressure Plus Key (+): Increases target pressure.
• Mode/Unit Switching Button: Toggles between PSI, KPA, BAR, Kg/cm² and preset modes (car, motorcycle, bicycle, ball).
• Power Supply/Inflation Start Button: Initiates or stops inflation.
• Apšvietimo mygtukas: Activates the LED light.
• Preset Air Pressure Key Reduction (-): Decreases target pressure.
• LED apšvietimas: Built-in light for visibility.
• USB išvesties prievadas: Skirta išoriniams įrenginiams įkrauti.
• C tipo įvesties prievadas: For charging the inflator unit.

Vaizdas: Stambus planas view of the 5000A Tire Inflator, labeling the display screen, preset air pressure keys, mode/unit button, power/inflation button, lighting button, LED lighting, USB output port, Type-C input port, inflator interface, and star output port.

Sąranka

Pradinis įkrovimas

Before first use, fully charge both the 5000A Tire Inflator and the 3000A Car Jump Starter.

1. Connect the provided USB-C charging cable to the Type-C Input Port on each device.
2. Kitą laido galą prijunkite prie USB sieninio adapterio (nepridedamas) arba maitinamo USB prievado.
3. The digital display on each device will indicate the charging status. Charge until the display shows 100%.

It is recommended to fully charge the devices every 3-6 months, even when not in use, to maintain battery health.

Naudojimo instrukcijos

Using the 3000A Car Jump Starter

This jump starter is designed to safely start vehicles with dead batteries.

1. Įsitikinkite, kad užvedimo jungiklis yra įkrautas bent 50 %.
2. Connect the smart jump cable's blue end into the EC5 Output Port of the jump starter.
3. Prijunkite raudoną klamp prie teigiamo (+) automobilio akumuliatoriaus gnybto.
4. Prijunkite juodą klamp prie neigiamo (-) automobilio akumuliatoriaus gnybto.
5. Įsitikinkite, kad klamps are securely attached and there is no corrosion.
6. Užveskite transporto priemonės variklį.
7. Kai variklis užsives, nedelsdami nuimkite užvedimo svirtįampnuo automobilio akumuliatoriaus pirmiausia atjunkite juodą (-) laidąamp, tada raudonas (+) clamp.
8. Disconnect the smart jump cable from the jump starter.

Svarbu: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive starts.

Image: The HPBS 3000A Jump Starter connected to a car battery with its red and black clamps, demonstrating its use for jump-starting a vehicle.

Image: The HPBS 3000A Jump Starter connected to a car battery, illustrating its capability to jump-start various vehicle types including vans, pick-ups, SUVs, motorboats, motorcycles, and lawn mowers.

Using the 5000A Tire Inflator

Inflate tires and other inflatables with precision.

1. Connect the air hose to the Inflator Interface on the device.
2. Screw the air hose nozzle onto the tire valve stem.
3. Press the Mode/Unit Switching Button to select the desired unit (PSI, KPA, BAR, Kg/cm²) and preset mode (car, motorcycle, bicycle, ball).
4. Use the Preset Air Pressure Plus (+) and Minus (-) keys to set the target pressure. Refer to your vehicle's manual or door jamb sticker for recommended tire pressure.
5. Press the Power Supply/Inflation Start Button to begin inflation. The device will automatically stop when the target pressure is reached.
6. Unscrew the air hose nozzle from the tire valve stem and disconnect the hose from the inflator.

Image: The HPBS 5000A Tire Inflator connected to a car tire, demonstrating its cordless operation and pressure detection capability.

Using the LED Flashlight (Both Devices)

Both the jump starter and tire inflator feature an integrated LED flashlight.

• On the 3000A Jump Starter, press and hold the ON/OFF button to activate the flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.
• On the 5000A Tire Inflator, press the Lighting Button to activate the flashlight. Press again to cycle through modes (if applicable). Press again to turn off.

Using as a Portable Power Bank (Both Devices)

Both devices can charge your electronic gadgets.

• Connect your device's USB charging cable to one of the USB Output Ports on the jump starter or tire inflator.
• Įrenginys pradės krautis automatiškai.

Image: The HPBS 3000A Jump Starter functioning as a 74WH portable power bank, charging a mobile phone and a tablet simultaneously.

Priežiūra

• Valymas: Įrenginius valykite minkštu, sausu skudurėliu. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Saugykla: Store the devices in a cool, dry place, away from direct sunlight and extreme temperatures.
• Įkrovimas: Recharge the devices every 3-6 months to maintain battery life, even if not used.
• Kabelio priežiūra: Patikrinkite laidus ir kontaktusamps for damage before each use. Replace if frayed or damaged.

Trikčių šalinimas

Specifikacijos

• Prekinis ženklas: HPBS
• Modelio numeris: 4726f0d1-c453-4aaa-b8f1-1288963ca631
• Jump Starter Peak Current: 3000A
• Tire Inflator Pressure: Iki 150 PSI
• Baterijos talpa: Approx. 74WH (for power bank function)
• Įvestis: USB-C
• Išvestis: USB-A (for charging devices), EC5 (for jump starting)
• Transporto priemonės aptarnavimo tipas: Automobiliai
• Pirmą kartą pasiekiama data: 21 m. lapkričio 2024 d

Garantija ir palaikymas

For warranty information and technical support, please refer to the product packaging or contact HPBS customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official HPBS store on Amazon: HPBS Store