1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of your Montech AX 120 ARGB Fans. These 120mm fans are designed to provide efficient cooling and customizable lighting for your computer system. Please read this manual thoroughly before installation to ensure proper function and safety.
2. Saugos informacija
- Prieš montuodami ar tvarkydami vidinius komponentus, visada atjunkite kompiuterį nuo maitinimo.
- Handle fans by their frames, avoiding contact with the blades.
- Kad išvengtumėte elektrostatinės iškrovos (ESD) sukeltos žalos, užtikrinkite tinkamą įžeminimą.
- Smulkias dalis ir pakavimo medžiagas laikykite vaikams nepasiekiamoje vietoje.
- Do not attempt to modify the fan or its cables. Unauthorized modifications may void your warranty and pose safety risks.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- Montech AX 120 ARGB Fan (x4)
- Tvirtinimo varžtai (x16)
- Fan Hub (if included in your specific pack)
Figure 3.1: Montech AX 120 ARGB Fan (Pack of 4)
4. Sąranka ir diegimas
Follow these steps to install your Montech AX 120 ARGB Fans:
- Paruoškite savo sistemą: Power off your computer and disconnect it from the power outlet. Open your computer case.
- Identify Fan Mounting Locations: Determine where you want to install the fans (e.g., front, top, rear, bottom of the case).
- Ventiliatorių montavimas: Position each fan in the desired location. The AX series fans are designed to blow air from the RGB-lit side towards the non-RGB side. Consider this for optimal airflow (e.g., intake or exhaust). Secure each fan using four mounting screws. The integrated anti-vibration pads help reduce noise from resonance.
4.1 pav.: priekis view of the Montech AX 120 ARGB Fan
4.2 pav.: Nugara view of the Montech AX 120 ARGB Fan, indicating airflow direction from front to back.
Figure 4.3: Integrated anti-vibration pads for reduced noise.
- Connect Power and ARGB Cables: Each fan has two cables: a 4-pin PWM cable for fan speed control and a 3-pin ARGB cable for lighting control.
- Connect the 4-pin PWM cable to an available 4-pin fan header on your motherboard or to a fan hub.
- Connect the 3-pin ARGB cable to an available 5V 3-pin ARGB header on your motherboard or to a compatible ARGB controller/hub. Pastaba: Nejunkite prie 12 V RGB lizdo, nes tai sugadins šviesos diodus.
- Kabelių valdymas: Tvarkingai išdėliokite laidus, kad jie netrukdytų kitiems komponentams ir pagerintų oro srautą.
- Uždarykite dėklą ir įjunkite: Once all connections are secure, close your computer case, reconnect power, and power on your system.
5. Naudojimo instrukcijos
The Montech AX 120 ARGB Fans offer both speed and lighting control:
5.1 Ventiliatoriaus greičio valdymas (PWM)
The 4-pin PWM connection allows for precise fan speed control based on system temperature. The fan speed can be adjusted from 600 RPM to 1600 RPM.
- BIOS/UEFI: Access your motherboard's BIOS/UEFI settings to configure fan curves. This allows the fan speed to automatically adjust based on CPU or system temperatures.
- Programinė įranga: Use your motherboard's fan control software (e.g., ASUS Fan Xpert, MSI Dragon Center, Gigabyte SIV) to create custom fan profiles within your operating system.
Figure 5.1: PWM fan speed adjustment from 600 RPM to 1600 RPM.
5.2 ARGB apšvietimo valdymas
The Addressable RGB (ARGB) lighting can be synchronized and customized through your motherboard's software or a dedicated ARGB controller.
- Pagrindinės plokštės programinė įranga: If connected to a 5V 3-pin ARGB header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to control lighting effects, colors, and synchronization with other ARGB components.
- ARGB valdiklis: If using a standalone ARGB controller, refer to the controller's manual for specific instructions on changing lighting modes.
Figure 5.2: Customizable hexagonal ARGB lighting.
6. Priežiūra
Reguliarus ventiliatorių aptarnavimas užtikrina optimalų veikimą ir ilgaamžiškumą:
- Valymas: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the computer is powered off and unplugged before cleaning.
- Patikra: Check cables for any signs of wear or damage. Ensure mounting screws are secure.
- Guolio ilgaamžiškumas: The fans feature an HDB (Hydro Dynamic Bearing) designed for high-end durability and a lifespan of 40,000 hours. No user maintenance is required for the bearing.
Figure 6.1: Hydro Dynamic Bearing (HDB) for extended lifespan.
7. Problemų sprendimas
If you encounter issues, refer to the following troubleshooting guide:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Ventiliatorius nesisuka | Loose 4-pin PWM cable connection Insufficient power from motherboard header Fan curve set too low in BIOS/software | Įsitikinkite, kad 4 kontaktų PWM kabelis yra tvirtai prijungtas. Try connecting to a different fan header. Adjust fan curve settings in BIOS/software to ensure fans spin at low temperatures. |
| ARGB apšvietimas neveikia | Loose 3-pin ARGB cable connection Connected to incorrect 12V RGB header ARGB software not configured or running | Įsitikinkite, kad 3 kontaktų ARGB kabelis yra tvirtai prijungtas prie 5 V ARGB lizdo. Verify connection is to a 5V 3-pin ARGB header, not a 12V 4-pin RGB header. Install and configure your motherboard's ARGB software or check your ARGB controller settings. |
| Per didelis triukšmas | Didelis ventiliatoriaus greitis Vibracijos Kliūtis | Adjust fan speed in BIOS/software to a lower RPM. Ensure all mounting screws are tight. The fans have anti-vibration pads to minimize this. Check for any cables or objects interfering with fan blades. |
8. Specifikacijos
Key technical specifications for the Montech AX 120 ARGB Fan:
- Modelis: AX120 PWM BLACK
- Ventiliatoriaus matmenys: 120 mm x 120 mm x 25 mm (4.72 x 4.72 x 0.98 colio)
- Guolių tipas: Hydro Dynamic Bearing (HDB)
- Sukimosi greitis: 600–1600 aps./min. (valdomas PWM)
- Triukšmo lygis: Under 27.9 dB(A)
- Maitinimo jungtis: 4-Pin PWM
- ARGB jungtis: 3 kontaktų 5 V ARGB
- Įvertintas ttage: 12V DC (Fan), 5V DC (LED)
- Vattage: 2 vatų
- Medžiaga: Metalas, plastikas, guma
- Gyvenimo trukmė: 40,000 valandos
9. Garantija ir palaikymas
Montech products are manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please visit the official Montech websvetainėje arba susisiekite su vietiniu pardavėju. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį prašymą.