JHS Pedals COLOUR BOX 10 Instruction Manual

Įvadas

The JHS Pedals COLOUR BOX 10 is a studio-quality preamp, EQ, and distortion unit designed for compatibility with various instruments. This manual provides detailed instructions for its setup, operation, and maintenance.

Pakuotės turinys

Prieš tęsdami sąranką, įsitikinkite, kad yra visi reikalingi daiktai:

• COLOUR BOX 10 Pedal
• Įvesties perjungimo jungiklis
• Maitinimo kabelis

Pagrindinės savybės

• Incorporates an Output Transformer for enhanced signal integrity.
• Safely Handles 48V Phantom Power, suitable for condenser microphones.
• Precision EQ Control with dedicated EQ Shift Knobs for detailed tone shaping.
• Ultra Clean Headroom with Hi/Lo Switch for versatile gain staging.
• Consistent Clean Signal on Acoustic Guitar, preserving natural tone.
• Silent Operation, No Switch-Pop, ensuring smooth performance transitions.
• Powered by Standard 9V DC Negative Power for easy integration into existing setups.

Valdikliai ir jungtys

The COLOUR BOX 10 features a comprehensive set of controls for precise sound sculpting. Refer to the image below for a visual guide to the pedal's layout.

1 paveikslas: viršuje view of the JHS Pedals COLOUR BOX 10, showing all control knobs and switches.

Valdymo rankenėlės:

• Meistras: Valdo bendrą pedalo išvesties garsumą.
• Pre-Vol: Adjusts the input gain, influencing the amount of saturation and distortion.
• Žingsnis: A stepped gain control that adds distinct stages of gain and color to the signal.
• Hi Pass: Controls the cutoff frequency for the high-pass filter. Turning clockwise increases the cutoff frequency, removing more low-end.
• Aukštas dažnis: Adjusts the high-frequency equalization.
• Vidurys: Adjusts the mid-frequency equalization.
• Bosas: Adjusts the low-frequency equalization.
• Treble Shift: Shifts the center frequency of the Treble EQ band.
• Mid Shift: Shifts the center frequency of the Middle EQ band.
• Bass Shift: Shifts the center frequency of the Bass EQ band.

Jungikliai:

• Hi Pass Toggle Switch: Activates or deactivates the Hi Pass filter.
• Hi/Lo Toggle Switch: Selects between high and low headroom modes, affecting the overall gain structure and clean signal.

Jungtys:

• Input (1/4" TRS): Connect your instrument or microphone.
• Output (XLR): Connect to an audio interface, mixer, or ampgyvesnis.
• 9V DC maitinimo įvestis: Connect a standard 9V DC negative center power supply.

Sąrankos vadovas

1. Maitinimo jungtis: Connect the provided 9V DC power cable to the pedal's power input. Ensure you use a standard 9V DC negative center power supply.
2. Instrument/Microphone Input: Connect your instrument (e.g., guitar, bass) or microphone to the 1/4" TRS input jack. If using a microphone requiring phantom power, the COLOUR BOX 10 can safely handle 48V phantom power.
3. Išvesties jungtis: Connect the XLR output of the COLOUR BOX 10 to your audio interface, mixing console, or ampgyvesnis.
4. Pradiniai nustatymai: Before powering on, set all control knobs to their middle position (12 o'clock) and ensure both toggle switches are in their neutral or 'off' position (if applicable, for Hi Pass).
5. Maitinimas: Apply power to the pedal. The indicator LED should illuminate.

Naudojimo instrukcijos

The COLOUR BOX 10 offers extensive tonal possibilities. Experiment with the controls to find your desired sound.

Gauk Staging:

• Naudokite Pre-Vol knob to adjust the initial gain. Higher settings will introduce more saturation and distortion.
• The Žingsnis knob provides incremental gain stages, adding character and drive.
• The Labas/Lo toggle switch selects between two headroom settings. 'Hi' offers more clean headroom, while 'Lo' provides earlier breakup and compression.

Išlyginimas:

• Sureguliuokite Treble, Vidurio, ir Bosas knobs to shape your tone.
• Pasinaudokite Treble Shift, Mid Shift, ir Bass Shift knobs to fine-tune the frequency centers of each EQ band, allowing for precise tonal adjustments.
• The Sveiki Pasai filter, activated by its toggle switch, can be used to remove unwanted low-end rumble or to tighten up your sound. Adjust the Sveiki Pasai knob to set the cutoff frequency.

Išėjimo lygis:

The Meistras knob controls the final output volume. Adjust this to match the input level of your next device in the signal chain.

Priežiūra

• Valymas: Pedalo išorę valykite minkšta, sausa šluoste. Venkite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Pedalą laikykite sausoje vietoje, atokiau nuo ekstremalių temperatūrų ir drėgmės.
• Maitinimas: Always use the correct 9V DC negative center power supply to prevent damage.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

For warranty information and technical support, please refer to the official JHS Pedals websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą garantiniams reikalavimams.

JHS Pedals Official Websvetainė: www.jhspedals.com