Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the GODIYMODULES Load Cell Sensor Transmitter Amplifier Module. This module is designed to convert signals from various strain sensors (such as weighing, tension, and pressure sensors) into standard 0-5V, 0-10V, or 4-20mA output signals. Please read this manual thoroughly before use to ensure proper functionality and safety.
Produkto savybės
- Utilizes a specialized instrumentation load cell amplifying chip for strong performance.
- Features a high-precision operational amplifier circuit, ensuring high accuracy and stability.
- Incorporates inductors and capacitors for power supply filtering, effectively reducing ripple interference.
- Equipped with reverse connection protection and surge protection for the power supply.
- Compatible with various strain sensors, including those for weighing, tension, pressure, and torque applications.
- Includes a power supply indicator and an output current strength indicator for easy monitoring.
- Supports multiple output signals: 0-5V, 0-10V, 4-20mA, or 0-20mA.
- Veikimo ttage diapazonas: nuolatinė srovė 12–24 V.
Sąranka
Follow these steps for proper installation and wiring of the Load Cell Sensor Transmitter Ampkėlimo modulis.
Laidų schema
1 pav.: laidų schema. This diagram illustrates the connections for the sensor terminal, power supply, and output signals. The left terminals are for sensor input (+S, -S, +E, GND), and the right terminals are for power (Power Positive, Power Negative) and output (0-5V, 0-10V, 4-20mA).
- Sensor Terminal: Define wiring according to the sensor's sequence. For example, if the sensor's red wire is excitation positive, connect it to the transmitter's excitation positive (E+).
- Maitinimas: Connect the positive terminal of the 12-24V DC power supply to "Power Positive" and the negative terminal to "Power Negative".
- Išvesties signalai: The 0-5V, 0-10V, and 4-20mA outputs share a common negative connection with the power supply negative.
Sąsajos apibrėžimas
2 pav.: Modulis perkeltasview. This image shows the general layout of the module with its input and output terminals.
| Signalo tipas | Laidų identifikavimas | Laidų apibrėžimas |
|---|---|---|
| Input Signal (Sensor) | +S | Signal Positive |
| -S | Signal Negative | |
| +E | Excitation Power Supply Positive | |
| GND | Excitation Power Supply Negative | |
| Output Signal & Power | VIN | Teigiamas maitinimo šaltinis |
| GND | Neigiamas maitinimo šaltinis | |
| OUT | 4-20mA išėjimas | |
| 0-5V | 0-5V išėjimas | |
| 0-10V | 0-10V išėjimas |
Pastaba: The output excitation power supply voltage of the module is 12V. The current and voltage outputs are relative to GND. On the front of the board, the left 4 terminals connect to the sensor, and the right 5 terminals are for output and power supply.
Naudojimo instrukcijos
After successful wiring, the module is ready for operation. Ensure all connections are secure before applying power.
- Maitinimas: Apply DC 12-24V power to the VIN and GND terminals. The power supply indicator LED should illuminate.
- Jutiklio jungtis: Connect your load cell or strain sensor to the +S, -S, +E, and GND terminals on the left side of the module according to the sensor's specifications and the wiring diagram.
- Išvesties pasirinkimas: The module provides simultaneous 0-5V, 0-10V, and 4-20mA outputs. Select the appropriate output for your receiving device (e.g., PLC, microcontroller, display).
- Kalibravimas (jei reikia): Depending on the specific load cell and application, calibration may be required to accurately map the sensor's output to the desired voltage/current range. Refer to your load cell's documentation for calibration procedures. The potentiometers on the module may be used for fine-tuning the output range, but precise calibration typically involves external equipment.
- Stebėjimas: Observe the output current strength indicator and the readings on your connected device to ensure proper operation.
Taikymo schema
Figure 3: Application Schematic. This schematic demonstrates typical applications, showing the module interfacing with different types of load cells (e.g., S-type, button-type, bar-type), a power supply, and output devices such as a PLC (Programmable Logic Controller) or a microcontroller.
Priežiūra
The Load Cell Sensor Transmitter Amplifier Module is designed for reliable operation with minimal maintenance. Adhere to the following guidelines:
- Aplinkos sąlygos: Operate the module within its specified temperature range (up to 80 °C) and in a dry environment to prevent moisture damage.
- Valymas: Jei reikia, švelniai nuvalykite modulį minkštu, sausu skudurėliu. Venkite naudoti skysčius ar abrazyvinius valiklius.
- Ryšio patikrinimai: Reguliariai tikrinkite visas laidų jungtis, kad įsitikintumėte, jog jos yra tvirtos ir be korozijos.
- Maitinimas: Užtikrinkite maitinimo šaltinio ttage remains within the DC 12-24V range to prevent damage.
Trikčių šalinimas
If you encounter issues with the module, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra maitinimo indikatoriaus lemputės | Nėra maitinimo šaltinio, neteisingas garsumastage, reverse polarity, or faulty connection. | Check power supply (DC 12-24V), ensure correct polarity, and verify all power connections. |
| No output signal or incorrect output | Incorrect sensor wiring, faulty sensor, incorrect output terminal selection, or module malfunction. | Verify sensor wiring according to the diagram. Test the sensor independently. Ensure the correct output terminal (0-5V, 0-10V, 4-20mA) is connected to your receiving device. |
| Unstable or noisy output | Power supply ripple, electromagnetic interference, or loose connections. | Ensure a stable and clean power supply. Check for nearby sources of electromagnetic interference. Secure all wiring connections. |
| Output does not match expected range | Module requires calibration or sensor is not properly calibrated. | Perform calibration as per sensor and application requirements. Adjust potentiometers on the module if necessary for fine-tuning. |
Specifikacijos
| Parametras | Vertė |
|---|---|
| Prekės ženklas | GODIYMODULES |
| Modelio numeris | Y-S65-001 |
| Darbo ttage | DC 12-24V |
| Išvesties signalo parinktys | 0-5V, 0-10V, 4-20mA, 0-20mA |
| Dabartinis reitingas | 20 miliamps (maks.) |
| Išvesties tipas | Electrical signal (Push-Pull) |
| Viršutinės temperatūros įvertinimas | 80 °C |
| Specifiniai naudojimo būdai | Weighing, tension pressure, torque sensors |
| Įtraukti komponentai | 1PCS Load Cell Sensor Transmitter AmpGyvenimo modulis |
Kas yra dėžutėje
- 1 x GODIYMODULES Load Cell Sensor Transmitter Amplifier Module (Model: Y-S65-001)
Garantija ir palaikymas
Dėl garantijos informacijos ar techninės pagalbos žr. pardavėjo politiką arba susisiekite tiesiogiai su gamintoju. Išsaugokite pirkimo kvitą, jei prireiktų pateikti pretenziją dėl garantijos.