Jauarta QS-WK16026 Digital Temperature Controller

1. Įvadas

This manual provides comprehensive instructions for the safe and efficient operation of your Jauarta QS-WK16026 Digital Temperature Controller. This intelligent thermostat is designed for precise temperature regulation across a wide voltage range (AC 110-240V), suitable for various applications requiring stable temperature control.

1 pav.: priekis view of the Jauarta QS-WK16026 Digital Temperature Controller.

2. Saugos informacija

Please read and understand all safety instructions before using this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Užtikrinkite maitinimo šaltinio ttage matches the device's specified range (AC 110-240V).
• Nenaudokite prietaiso šlapiomis rankomis arba damp aplinkos.
• Neardykite ir nemodifikuokite įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems darbuotojams.
• Keep the device away from water, direct sunlight, and extreme temperatures.
• Užtikrinkite tinkamą vėdinimą aplink įrenginį.
• The ABS housing provides strong insulation; however, always handle with care to prevent damage.

3. Produktas baigtasview

The Jauarta QS-WK16026 features an intuitive display and control buttons for easy temperature management.

2 pav. Iš arti view of the display and control panel.

Komponentai:

• LED Digital Tube Display: Shows actual temperature (red), set start temperature (left yellow), and set stop temperature (right yellow).
• Start Setting Buttons: Up/Down arrows to adjust the desired start temperature.
• Stop Setting Buttons: Up/Down arrows to adjust the desired stop temperature.
• Būsenos lemputė: Indicates device operation (red light on = working, red light off = stopped).
• Elektros lizdas: For connecting the heating or cooling device.
• Temperatūros zondas: Tiksliam temperatūros matavimui.

4. Specifikacijos

5. Sąranka

Follow these steps to set up your temperature controller:

1. Prijunkite temperatūros zondą: Insert the temperature probe into the designated port on the controller. Ensure it is securely connected.
2. Zondo padėtis: Place the temperature probe in the area where you wish to measure and control the temperature (e.g., fish tank, greenhouse).
3. Prijunkite įrenginį: Connect the temperature controller's power plug into a suitable AC 110-240V power outlet.
4. Connect Heating/Cooling Appliance: Plug your heating or cooling appliance (e.g., heater, fan) into the power outlet on the temperature controller.

Figure 3: Temperature controller with power cord and probe connected.

6. Naudojimo instrukcijos

Ekrano supratimas:

• The red digital tube in the middle displays the current actual temperature measured by the probe.
• The left yellow digital tube displays the set pradėti temperatūros.
• The right yellow digital tube displays the set sustoti temperatūros.
• The red status light indicates when the connected appliance is active (on) or inactive (off).

Temperatūros nustatymas:

The controller operates in either heating or cooling mode based on the relationship between the set start and stop temperatures.

1. Set Start Temperature: Use the "Start Setting" up/down arrow buttons to adjust the desired temperature at which the connected appliance should activate.
2. Set Stop Temperature: Use the "Stop Setting" up/down arrow buttons to adjust the desired temperature at which the connected appliance should deactivate.

Veikimo režimai:

• Šildymo režimas: Jei Start Temperature yra nustatytas žemiau į Stabdymo temperatūra, the controller will operate in heating mode. The appliance will turn on when the actual temperature drops below the set start temperature and turn off when it reaches the set stop temperature.
• Aušinimo režimas: Jei Start Temperature yra nustatytas aukščiau į Stabdymo temperatūra, the controller will operate in cooling mode. The appliance will turn on when the actual temperature rises above the set start temperature and turn off when it drops to the set stop temperature.

Temperatūros kalibravimas:

The device supports temperature calibration within a range of ±9℃. Specific instructions for calibration are not provided in this manual. If precise calibration is required, please contact customer support for detailed guidance.

7. Priežiūra

• Valymas: Prietaisą valykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Kai nenaudojate, laikykite prietaisą vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Zondų priežiūra: Ensure the temperature probe is kept clean and free from debris for accurate readings. Avoid bending or damaging the probe cable.

8. Problemų sprendimas

If you encounter issues with your temperature controller, refer to the following common troubleshooting steps:

• Įrenginys neįsijungia:
  • Check if the power plug is securely inserted into a live power outlet.
  • Patikrinkite, ar maitinimo lizdas veikia tinkamai.
• Appliance Not Activating/Deactivating:
  • Ensure the appliance is correctly plugged into the controller's outlet and is powered on.
  • Check if the set start and stop temperatures are appropriate for your desired heating or cooling mode.
  • Verify that the temperature probe is properly connected and positioned.
• Netikslūs temperatūros rodmenys:
  • Ensure the temperature probe is clean and undamaged.
  • Verify the probe is fully immersed or positioned correctly in the environment being measured.
  • Consider if temperature calibration is needed (refer to Section 6).

Jei išbandžius šiuos veiksmus problemos išlieka, susisiekite su klientų aptarnavimo tarnyba.

9. Garantija ir palaikymas

Dėl garantijos informacijos ar techninės pagalbos žr. gaminio pakuotę arba susisiekite tiesiogiai su gamintoju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.