1. Įvadas
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Saugos informacija
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- Do not disassemble or modify the product. Unauthorized modifications may cause damage and void the warranty.
- Laikykite gaminį atokiau nuo ugnies ar aukštos temperatūros.
- Avoid direct eye exposure to the bright LED light.
- Baterijas ir elektroninius komponentus utilizuokite pagal vietinius reikalavimus.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. Pakuotės turinys
Prašome patikrinti pakuotę, kad įsitikintumėte, jog yra visi reikalingi daiktai:
- FLITI AMS193 Solar Security Light Unit (x2)
- Tvirtinimo laikiklis (x2)
- Screws and Wall Plugs (x4 sets)
- Vartotojo vadovas (1x)
4. Produkto ypatybės
- Super ryškus apšvietimas: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- IP65 atsparus vandeniui: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. Sąranka ir diegimas
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
5.1 Diegimo vietos pasirinkimas
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 Montavimo žingsniai
- Mark the desired installation position on the wall.
- Drill two holes at the marked positions.
- Įkiškite sieninius kaiščius į išgręžtas skyles.
- Pritvirtinkite tvirtinimo laikiklį prie sienos naudodami pateiktus varžtus.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Norėdami maksimaliai padidinti įkrovimo efektyvumą, saulės baterijos plokštę nukreipkite taip, kad ji būtų nukreipta į tiesioginius saulės spindulius.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. Naudojimo instrukcijos
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 Pradinis įkrovimas
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
6.2 Režimo pasirinkimas
Press the power button on the back of the unit to cycle through the following modes:
- Mode 1 (Motion Sensor Mode): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- 3 režimas (visada įjungtas režimas): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. Priežiūra
Regular maintenance ensures the longevity and optimal performance of your solar lights.
- Švarus saulės skydelis: Periodiškai nuvalykite saulės bateriją minkšta šluosteamp šluoste, kad pašalintumėte dulkes, nešvarumus ar šiukšles. Švarus skydelis užtikrina maksimalų saulės šviesos sugėrimą ir įkrovimo efektyvumą.
- Baterijos keitimas: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- Patikrinkite, ar nėra pažeidimų: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. Problemų sprendimas
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia naktį. | Nepakanka saulės šviesos įkrovimui. Switch is off or in incorrect mode. Battery depleted or faulty. | Užtikrinkite, kad saulės baterijos per dieną gautų 6–8 valandas tiesioginių saulės spindulių. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| Šviesa pritemdyta arba dega tik trumpą laiką. | Nepakankamas įkrovimas. Nešvari saulės baterija. Senstanti baterija. | Perkelkite šviestuvą į vietą, kurioje yra daugiau tiesioginių saulės spindulių. Reguliariai valykite saulės kolektorių. Replace the rechargeable battery if it's old. |
| Judesio jutiklis neveikia arba yra per jautrus. | Jutiklis užblokuotas. Neteisingas montavimo aukštis / kampas. Environmental factors (e.g., strong winds, heat sources). | Įsitikinkite, kad jutiklio lęšis yra švarus ir neuždengtas. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
Jei šie sprendimai neišsprendžia problemos, susisiekite su klientų aptarnavimo tarnyba.
9. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | AMS193 |
| Prekės ženklas | FLITI |
| Šviesos šaltinis | 229 LED karoliukai |
| Ryškumas | Iki 2500 liumenų |
| Spalvos temperatūra | 6500 kelvinų (šalta balta) |
| Judesio jutiklio diapazonas | Iki 12 metrų (39 pėdų) |
| Judesio jutiklio kampas | 120 laipsnių |
| Atsparumas vandeniui | IP65 Atsparus vandeniui |
| Maitinimo šaltinis | Varomas saulės energija |
| Medžiaga | Plastikiniai |
| Montavimo tipas | Sieninis laikiklis |
| Number of Light Heads | 3 (reguliuojamas) |
10. Garantija ir palaikymas
Gamintojo garantija: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
Kas yra padengta: Medžiagų ir gamybos defektai.
Kas neapima: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
Klientų aptarnavimas: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.