KYORITSU AC Clamp Meter 2002PA Instruction Manual

1. Baigėsiview

The KYORITSU AC Clamp Meter 2002PA is a versatile electrical measuring instrument designed for accurate measurement of AC current up to 2000A. It features a large teardrop-shaped core for easy clamping around conductors, a recorder output terminal, and multiple functions including AC/DC voltage, resistance, and continuity testing. This manual provides essential information for safe and effective use of the device.

Figure 1: KYORITSU AC Clamp Meter 2002PA

This image shows the KYORITSU AC Clamp Meter 2002PA, a black handheld device with a red clamp jaw at the top. The display shows "000" and there are several buttons below it. The device is designed for measuring electrical current without direct contact.

2. Saugos informacija

Always read and understand this instruction manual before using the KYORITSU AC Clamp Meter 2002PA. Failure to follow safety instructions may result in electric shock, fire, or damage to the device. This product complies with IEC 61010-1, IEC 61010-031, IEC 61010-2-032, and IEC 61326-1 standards.

• Negalima use the meter if it appears damaged or is operating abnormally.
• Negalima taikyti ttage or current exceeding the maximum rated values.
• Prieš naudodami įsitikinkite, kad akumuliatoriaus dangtelis yra sandariai uždarytas.
• Always wear appropriate personal protective equipment (PPE) when working with electrical circuits.
• Negalima use the meter in wet environments or during electrical storms.
• Refer to local and national safety codes for proper electrical work procedures.

3. Pagrindinės savybės

• Large Teardrop Core: Facilitates easy clamping around thick conductors.
• Didelės srovės matavimas: Capable of measuring large AC currents up to 2000A.
• Daugiafunkcinis: Measures AC current, AC voltage, DC ttage, pasipriešinimas ir tęstinumas.
• Recorder Output Terminal: Allows connection to external recording devices.
• Didelė raiška: Features a small resolution of 0.1A for precise measurements.
• Duomenų laikymas ir piko laikymas: For capturing stable or peak readings.
• Automatinis energijos taupymas: Extends battery life by automatically turning off after a period of inactivity.

4. Sąranka

4.1 Akumuliatoriaus įdėjimas

1. Suraskite baterijų skyriaus dangtelį matuoklio gale.
2. Use a screwdriver (if required) to open the battery compartment.
3. Insert two AA (R6P, 1.5V) batteries, ensuring correct polarity.
4. Uždėkite baterijų skyriaus dangtelį ir tvirtai jį pritvirtinkite.

4.2 Connecting Test Leads (for Voltage/Atsparumas/Tęstinumas)

1. Insert the red test lead into the VΩ terminal.
2. Įkiškite juodą bandymo laidą į COM gnybtą.
3. Ensure connections are secure before taking measurements.

5. Naudojimo instrukcijos

5.1 Measuring AC Current

1. Turn the rotary switch to the "ACA" position.
2. Atidarykite klamp žandikaulį paspausdami svirtį.
3. Enclose only one conductor of the circuit to be measured within the clamp žandikaulis.
4. Release the lever to close the clamp žandikaulis tvirtai apvyniokite laidininką.
5. Read the AC current value displayed on the LCD.

5.2 AC matavimas, ttage

1. Turn the rotary switch to the "ACV" position.
2. Connect the test leads across the circuit points where voltage turi būti išmatuotas.
3. Perskaitykite AC ttage reikšmė rodoma LCD ekrane.

5.3 DC matavimas Voltage

1. Turn the rotary switch to the "DCV" position.
2. Connect the test leads across the circuit points where voltage is to be measured, observing polarity.
3. Perskaitykite DC ttage reikšmė rodoma LCD ekrane.

5.4 Atsparumo matavimas

1. Pasukite sukamąjį jungiklį į „Ω“ padėtį.
2. Prieš matuodami varžą, įsitikinkite, kad grandinė yra atjungta nuo įtampos.
3. Connect the test leads across the component or circuit path to be measured.
4. Read the resistance value displayed on the LCD.

5.5 Tęstinumo testas

1. Turn the rotary switch to the "Continuity" position (often indicated by a speaker icon).
2. Įsitikinkite, kad grandinėje nėra įtampos.
3. Prijunkite bandymo laidus prie komponento arba grandinės kelio.
4. If continuity exists (resistance below approximately 50±35Ω), the buzzer will sound.

6. Priežiūra

6.1 Valymas

• Wipe the meter with a soft, dry cloth.
• Negalima naudokite abrazyvinius valiklius arba tirpiklius.

6.2 Akumuliatoriaus keitimas

• When the battery indicator appears on the display, replace the batteries as described in Section 4.1.
• Jei matuoklis nebus naudojamas ilgesnį laiką, išimkite baterijas, kad išvengtumėte pratekėjimo.

7. Problemų sprendimas

8. Specifikacijos

Figure 2: Detailed specifications for KYORITSU AC Clamp Meter 2002PA and 2002R (RMS).

This image displays a table of detailed specifications for the KYORITSU AC Clamp Meter models 2002PA and 2002R. It includes measurement ranges and accuracies for AC current, AC voltage, DC ttage, resistance, and continuity, along with physical dimensions, power source, and compliance standards.

9. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official KYORITSU websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.