SMTAV 4K PTZ Camera User Manual

Įvadas

This manual provides detailed instructions for the setup, operation, and maintenance of your SMTAV 4K PTZ Camera (Model: BX30UHD). This camera features a new generation 1/1.8-inch UHD CMOS sensor, capable of delivering 4K (3840x2160) ultra-high-resolution images, and is backward compatible with 1080p and 720p resolutions. It supports 30X optical zoom, POE, Network IP Live Streaming, and simultaneous 3G-SDI and USB3.0 video output, making it suitable for conferences, church services, and educational environments.

Produktas baigtasview

Sąrankos vadovas

1. Išpakavimas ir patikrinimas

• Carefully remove the camera and all accessories from the packaging.
• Patikrinkite, ar yra visi pakavimo sąraše išvardyti komponentai.
• Inspect the camera for any signs of physical damage. If damage is found, contact your dealer immediately.

2. Įdėjimas

Position the camera on a stable, flat surface or mount it securely using a compatible mounting bracket (sold separately). Ensure the camera has adequate ventilation and is not exposed to direct sunlight, excessive heat, or moisture.

3. Jungtys

Refer to Figure 2 for port locations.

1. Maitinimo jungtis: Connect the provided 12V DC power adapter to the "DC 12V" port on the rear of the camera.
2. Network Connection (PoE or LAN):
   • For Power over Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled switch or injector to the "LAN" port. This will provide both power and network connectivity.
   • For standard LAN: Connect an Ethernet cable from your network router/switch to the "LAN" port.
3. Vaizdo įrašo išvestis:
   • HDMI: Connect an HDMI cable to the "HDMI" port for direct video output to a display or capture device.
   • 3G-SDI: Connect an SDI cable to the "3G-SDI" port for professional video output.
   • USB 3.0: Connect a USB 3.0 cable to the "USB 3.0" port for high-speed video output to a computer.
   • USB 2.0: Connect a USB 2.0 cable to the "USB 2.0" port for additional connectivity, if required.
4. Garso jungtis: Connect audio input devices (e.g., microphone) to "LINE IN" and audio output devices (e.g., speakers) to "LINE OUT" using 3.5mm audio cables.
5. Valdymo jungtys (neprivaloma):
   • RS232: Use the "RS232 IN" and "RS232 OUT" ports for serial control.
   • RS485: Use the "RS485" port for serial control.

Naudojimo instrukcijos

1. Įjungimas/išjungimas

• Maitinimas: After all connections are made, connect the power adapter to an electrical outlet. The "POWER" indicator on the front panel (Figure 1) will illuminate.
• Išjungti: Disconnect the power adapter from the electrical outlet.

2. Basic Camera Control

The camera can be controlled via IP (network), RS232, or RS485. A dedicated remote control (sold separately) or software application is typically used for full functionality.

• Pasukimas / Pakreipimas / Priartinimas (PTZ): Use the control interface to adjust the camera's horizontal (pan), vertical (tilt), and optical zoom (30X) positions.
• Fokusas: The camera supports auto-focus. Manual focus adjustment may be available through the control interface.
• Vaizdo nustatymai: Adjust settings such as brightness, contrast, saturation, white balance, and exposure through the camera's web sąsaja arba valdymo programinė įranga.

3. Tinklo konfigūracija

To access the camera's web interface for advanced settings and IP streaming, you will need to configure its network settings. The default IP address can usually be found in a separate quick start guide or on the camera's packaging. Connect a computer to the same network as the camera and use a web browser to access the camera's IP address.

4. Tiesioginis transliavimas ir įrašymas

The camera supports various streaming protocols (e.g., RTMP, RTSP) for live broadcasting and integration with video conferencing platforms. Refer to the camera's web interface or software manual for detailed streaming setup instructions.

Priežiūra

• Valymas: Use a soft, dry cloth to clean the camera body. For the lens, use a lens cleaning cloth and specialized lens cleaning solution. Do not use harsh chemicals or abrasive materials.
• Firmware atnaujinimai: Periodically check the SMTAV official websvetainės, kurioje rasite programinės įrangos atnaujinimus. Nuolat atnaujinant programinę įrangą užtikrinamas optimalus veikimas ir prieiga prie naujų funkcijų.
• Saugykla: When not in use for extended periods, store the camera in a cool, dry place, away from direct sunlight and dust.

Trikčių šalinimas

If the problem persists after attempting these solutions, please contact SMTAV customer support.

Specifikacijos

Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official SMTAV websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

SMTAV Official Websvetainė: www.smtav.com