Jauarta 5V 1A UPS Uninterruptible Power Supply Module

Įvadas

This manual provides essential instructions for the safe and efficient use of your Jauarta 5V 1A UPS Uninterruptible Power Supply Module. This module is designed to provide a stable 5V 1A output, powered by either an external 5V input or a connected lithium battery, ensuring continuous operation for your devices.

Pagrindinės funkcijos:

• Galia: Provides a maximum output of 5V 1A.
• Overvoltage Apsauga: Automatically cuts off input when it exceeds 6V, switching to battery power.
• Apsauga nuo atvirkštinio poliškumo: Includes protection against reverse connection for both input and output.
• Trumpojo jungimo apsauga: Built-in protection against output short circuits.
• Įkrovimas ir iškrovimas vienu metu: Supports charging the battery while simultaneously supplying power to the load.

Svarbi saugos informacija

• Baterijos poliškumas: The positive and negative electrodes of the battery must not be reversed. Reversing polarity will damage the module.
• Įvesties tomastage: Įsitikinkite, kad įvesties ttage does not exceed 20V. Exceeding 20V can cause damage to the unit.
• Laidai: Due to potentially large currents, it is recommended to use thicker wires. The wire cross-section should be greater than 1.5mm².
• Išėjimo srovė: The maximum output current is 1A, but continuous 1A output may not be sustained under all conditions.
• Veikimo aplinka: Operate within the specified temperature range of -40°C to 85°C and humidity range of 0-95%RH.

Specifikacijos

Pakuotės turinys

Į paketą įeina:

• 1 x Jauarta 5V 1A UPS Uninterruptible Power Supply Module

Sąranka ir prijungimas

Follow these steps to set up your UPS module:

1. Prijunkite įvesties maitinimą: Connect the correct 5V input voltage to the designated input terminals (N+ and N-). Ensure polarity is correct.
2. Prijunkite akumuliatorių: Connect your polymer lithium battery or lithium battery to the B+ and B- terminals. Observe correct polarity to prevent module damage. The recommended battery capacity is below 10000mA.
3. Patikrinkite išvestį: Before connecting your load, you may check the output voltage with a voltmeter and current with an ammeter at the OUT+ and OUT- terminals.
4. Prijungti apkrovą: Connect your 5V device to the OUT+ and OUT- terminals.

Vaizdas: Iš viršaus į apačią view of the Jauarta UPS module, highlighting the input (N+, N-), battery (B+, B-), and output (OUT+, OUT-) connection points.

Vaizdas: kampuotas view of the Jauarta UPS module, providing a general perspective of its components and layout.

Naudojimo instrukcijos

The Jauarta UPS module operates automatically once connected. It will draw power from the 5V input when available and simultaneously charge the connected lithium battery. If the 5V input power is interrupted or falls below 6V, the module will seamlessly switch to drawing power from the connected battery to maintain a continuous 5V output to your device.

• Charging Indicator (Optional): Users can install a common anode red-green LED as a charging indicator. The red light indicates if the output terminal is loaded. The green light flashes to show battery capacity. If there is no load or battery, the green light will turn off.
• Power Continuity: The module ensures uninterrupted power supply during transitions between external power and battery power.

Priežiūra

The Jauarta UPS module is designed for low maintenance. To ensure optimal performance and longevity:

• Laikykite modulį švarų, be dulkių ir šiukšlių.
• Ensure proper ventilation around the module, especially during operation, to prevent overheating.
• Reguliariai tikrinkite laidus, ar nėra susidėvėjimo ar pažeidimų požymių.
• Store in a dry environment within the specified operating temperature and humidity ranges when not in use.

Trikčių šalinimas

If you encounter issues with your UPS module, consider the following:

• Nėra išėjimo galios:
  • Check if the input power is correctly connected and within the 5V range.
  • Verify that the battery is connected with correct polarity and is charged.
  • Ensure there is no short circuit at the output terminals.
• Module Damage:
  • If the module is not functioning after initial connection, check if the battery or input power was connected with reversed polarity.
  • Patvirtinkite, kad įvesties ttage did not exceed 20V at any point.
• Pertraukiama galia:
  • Ensure all wire connections are secure and that the wire thickness is adequate for the current draw (greater than 1.5mm² recommended).
  • Check the battery health and capacity.

Jei problemos išlieka, susisiekite su klientų aptarnavimo tarnyba dėl tolesnės pagalbos.

Garantija ir palaikymas

This Jauarta product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact Jauarta customer support. For technical assistance or troubleshooting not covered in this manual, please reach out to our support team through the official Jauarta websvetainėje arba jūsų pardavėjui.