Zevemomo 6-Piece Solid Wood Dining Table Set Instruction Manual

Įvadas

Thank you for choosing the Zevemomo 6-Piece Solid Wood Dining Table Set. This set includes one rectangular dining table, four upholstered chairs, and one upholstered bench, designed for comfortable dining and versatile use in various settings. This manual provides essential information for safe assembly, proper use, and effective maintenance of your new dining set.

Svarbi saugos informacija

• Svorio talpa: Do not load more than 330 pounds (150 kg) on the dining table. Exceeding this limit may cause damage or injury.
• Surinkimas: Assemble all components strictly according to the provided instructions to ensure structural stability and safety. Incorrect assembly can lead to instability and potential hazards.
• Astrus kampai: Exercise caution during assembly and use to avoid contact with any potentially sharp edges.
• Vaikai: Surinkimo metu laikykite smulkias dalis ir pakavimo medžiagas atokiau nuo vaikų.
• Vieta: Place the dining set on a flat, stable surface to prevent wobbling or tipping.

Pakuotės turinys

Your Zevemomo 6-Piece Solid Wood Dining Table Set is shipped in two boxes. Please verify that all components listed below are present before beginning assembly.

• 1x valgomasis stalas
• 4 x Upholstered Dining Chairs
• 1 x Upholstered Bench
• Assembly Hardware Kit (screws, bolts, Allen key)
• Surinkimo instrukcijos

1 pav. Baigtaview of the 6-Piece Dining Table Set components.

2 pav. Išsamus view of the dining set components.

Gaminio specifikacijos

3 pav.: Matmenų perimetrasview of the dining set components.

Sąrankos ir surinkimo instrukcijos

Please read all instructions carefully before beginning assembly. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches. Two people are recommended for assembly.

1. Išpakavimas ir paruošimas

• Open both boxes and carefully remove all components and hardware.
• Check the parts list against the package contents to ensure nothing is missing.
• Lay out all parts on a clean, soft surface (e.g., a carpet or blanket) to prevent damage.

2. Assembling the Chairs

Each chair requires attaching the legs to the seat frame. Refer to the detailed instructions and diagrams included in your package for specific steps.

• Identify the chair seat, backrest, and legs.
• Attach the front legs to the chair seat using the specified bolts and washers. Do not fully tighten yet.
• Attach the back legs to the chair seat and backrest.
• Once all bolts are in place, gradually tighten them evenly until secure. Avoid over-tightening.
• Ensure the chair is stable and level.

Figure 4: Detail of chair backrest and bench cushion construction.

3. Assembling the Bench and Table

The bench and table assembly involves attaching their respective legs to the main body. Follow the instructions provided in your package for precise assembly.

• Suoliuko surinkimas: Attach the four legs to the underside of the bench seat using the provided hardware. Ensure all connections are snug.
• Stalo surinkimas: Carefully place the tabletop upside down on your protected surface. Attach each of the four table legs to the corner brackets on the underside of the tabletop.
• Insert all bolts and hand-tighten them first. Then, use the Allen key to fully tighten all bolts evenly.
• Once assembled, carefully flip the table upright.

Figure 5: Features contributing to the durability and stability of the dining set, including non-slip foot pads, thickened tabletop, and solid wood legs.

Naudojimo ir eksploatavimo gairės

• Numatytas naudojimas: This dining set is designed for indoor use in dining rooms, kitchens, or similar residential and commercial environments.
• Sėdimų vietų skaičius: The set comfortably accommodates up to 6 people (4 on chairs, 2 on the bench).
• Svorio pasiskirstymas: Distribute weight evenly on the table and bench. Avoid placing heavy objects on the edges.
• Judėjimas: When moving the table or bench, lift it rather than dragging to prevent damage to the legs or floor.

Figure 6: The dining set is suitable for various occasions and room types.

Priežiūra ir priežiūra

• Valymas:
  • For the tabletop and wooden legs, wipe clean with a soft, damp skudurėliu. Venkite stiprių cheminių medžiagų ar abrazyvinių valiklių.
  • For upholstered chairs and bench, spot clean with a mild fabric cleaner as needed. Test on an inconspicuous area first.
• Išsiliejimai: Wipe up spills immediately to prevent staining, especially on the tabletop and fabric cushions.
• Šiluma ir drėgmė: Use coasters and placemats to protect the tabletop from hot dishes and moisture rings.
• Saulės šviesa: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of wood and fabric.
• Priveržkite aparatūrą: Periodically check and tighten all assembly hardware to ensure the stability and longevity of the furniture.

Figure 7: The tabletop is designed for easy cleaning with a damp audinys.

Trikčių šalinimas

Garantija ir klientų aptarnavimas

For any questions regarding assembly, missing parts, or product defects, please contact Zevemomo customer support. Please have your model number (TBSET BK) and purchase information ready when contacting support.

Information regarding specific warranty terms and conditions can typically be found on the product's purchase page or by contacting the seller directly. Keep your proof of purchase for warranty claims.

Dažnai galite rasti pagalbos kontaktinę informaciją svetainėje Zevemomo Store on Amazon.