1. Įvadas
This manual provides detailed instructions for the installation, setup, operation, and maintenance of the SENSORWORX SWX-222-1 Ceiling Motion Sensor. This advanced device utilizes dual Passive Infrared (PIR) and Acoustic technology to accurately detect large motion across expansive areas, ensuring comprehensive coverage of up to 2000 square feet. It is designed for large indoor applications and operates on a low voltage range of 12-24 VAC/VDC.
2. Saugos informacija
ĮSPĖJIMAS:
- Prieš montuodami arba atlikdami įrenginio techninę priežiūrą, visada atjunkite maitinimą grandinės pertraukikliu.
- Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis visų vietinių ir nacionalinių elektros kodeksų.
- Do not install in locations where the ambient temperature exceeds the operating range of the device.
- Šis prietaisas skirtas naudoti tik patalpose.
Failure to follow these instructions may result in electrical shock, fire, or serious injury.
3. Produktas baigtasview
The SENSORWORX SWX-222-1 is a ceiling-mounted motion sensor designed for precise occupancy detection in large indoor spaces. Its dual technology combines PIR for heat signature detection and acoustic sensing for sound-based motion, minimizing false triggers and ensuring reliable performance.
Pagrindinės funkcijos:
- Dual Technology (PIR/Acoustic) for enhanced accuracy.
- Covers up to 2000 sq ft.
- Žemas tomastage Operation: 12-24 VAC/VDC.
- Maximum Mount Height: 15 ft.
- Pagaminta JAV.
Komponentai:
- Ceiling Sensor Unit
- Vielos laidai
- Montavimo įranga
3.1 pav.: priekis view of the SENSORWORX SWX-222-1 Ceiling Motion Sensor. The sensor is a circular white device with a central faceted lens for PIR detection.
4. Montavimas
Prieš pradėdami montuoti, įsitikinkite, kad maitinimas yra atjungtas nuo grandinės pertraukiklio.
4.1 Montavimo parinktys
The SWX-222-1 sensor can be mounted directly to a ceiling surface or to a junction box. The maximum recommended mounting height is 15 feet for optimal coverage.
Figure 4.1: Detailed installation options for the SENSORWORX SWX-222-1. This diagram illustrates direct ceiling mounting, mounting to a 4" octagon box, and a single gang mudring, along with dimensions and components like the chase nipple and lock nut.
4.2 Laidai
The sensor operates on 12-24 VAC/VDC. Connect the sensor's wire leads according to the wiring diagram provided with the product and local electrical codes. Ensure proper polarity for DC connections.
- Connect the power supply to the designated power input wires.
- Connect the output wires to the controlled load (e.g., lighting relay).
5. Sąranka ir konfigūracija
The SWX-222-1 sensor typically requires minimal setup due to its advanced auto-calibration features. However, some adjustments may be possible via the programming button or external control systems if applicable.
5.1 Pradinis įjungimas
After installation and wiring are complete, restore power to the circuit. The sensor will undergo a brief initialization period. During this time, avoid motion in the detection area.
5.2 Sensitivity Adjustment (if applicable)
Refer to the specific product documentation or the programming button diagram (Figure 4.1) for details on adjusting PIR or acoustic sensitivity, if this feature is available on your model. Typically, the sensor is optimized for most environments.
6. Naudojimo instrukcijos
The SENSORWORX SWX-222-1 operates automatically to detect occupancy and control connected loads.
6.1 Occupancy Detection
When motion is detected within the sensor's coverage area (up to 2000 sq ft), the sensor will activate its output, typically turning on lights or other connected devices. The dual PIR and Acoustic technology ensures reliable detection even for minor movements.
6.2 Vacancy Mode
After the last detected motion, the sensor will initiate a time delay. If no further motion is detected during this period, the sensor will deactivate its output, turning off the connected load. This feature helps conserve energy.
6.3 Aprėpties zona
The sensor provides optimal coverage for large areas up to 2000 sq ft when mounted at a maximum height of 15 ft. Ensure the detection area is free from obstructions that could block the sensor's line of sight.
7. Priežiūra
The SENSORWORX SWX-222-1 is designed for long-term, maintenance-free operation. However, periodic checks can ensure optimal performance.
7.1 Valymas
If the sensor lens appears dusty or dirty, gently wipe it with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents, as these can damage the lens or housing.
7.2 Aplinkosaugos aspektai
Ensure the sensor is not exposed to direct sunlight, strong drafts, or rapid temperature changes, as these can affect its performance. Avoid placing heat-generating equipment directly beneath the sensor.
8. Problemų sprendimas
If you experience issues with your SENSORWORX SWX-222-1 sensor, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Jutiklis neaptinka judesio | No power; Obstruction in detection area; Incorrect wiring; Sensor malfunction. | Check power supply; Remove obstructions; Verify wiring connections; Contact support if issues persist. |
| Lights turn on/off unexpectedly | False triggers from HVAC, drafts, or reflections; Incorrect sensitivity settings. | Identify and mitigate sources of false triggers; Adjust sensitivity if possible (refer to setup section). |
| Sensor constantly detects motion | Constant motion in area; Sensor malfunction. | Ensure area is clear of constant motion; Contact support. |
If the problem persists after attempting these solutions, please contact SENSORWORX customer support.
9. Specifikacijos
| Atributas | Detalė |
|---|---|
| Modelio numeris | SWX-222-1 |
| Technologijos | Dual PIR/Acoustic |
| Aprėpties sritis | Iki 2000 kv |
| Veiklos ttage | 12-24 VAC/VDC |
| Maksimalus tvirtinimo aukštis | 15 pėdų |
| Gaminio matmenys (I x P x A) | 4 x 4 x 1.25 colio |
| Svoris | 4.75 uncijos |
| Gamintojas | SENSORWORX |
| Veikimo režimas | ĮJUNGTI IŠJUNGTI |
| Kontakto tipas | Single Pole Single Throw (SPST) |
| Kilmės šalis | JAV |
10. Garantija ir palaikymas
10.1 Informacija apie garantiją
The SENSORWORX SWX-222-1 Ceiling Motion Sensor comes with a comprehensive 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official SENSORWORX websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.
10.2 Pagalba klientams
For technical assistance, troubleshooting, or warranty claims, please contact SENSORWORX customer support. Contact information can typically be found on the manufacturer's websvetainėje arba ant produkto pakuotės.
Note: Always have your product model number (SWX-222-1) and purchase date ready when contacting support.