KERDE P30A Electric Bidet Toilet Seat User Manual

Įvadas

Thank you for choosing the KERDE P30A Electric Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet seat. Please read this manual thoroughly before installation and use, and retain it for future reference.

Saugos informacija

Norėdami užtikrinti saugų darbą ir išvengti sužalojimų ar žalos, laikykitės šių atsargumo priemonių:

• Ensure the product is connected to a domestic water supply.
• The electrical wire length is approximately 33 inches. Use a 120V power supply with a 3-hole socket.
• Do not immerse the bidet seat or electrical components in water.
• Prieš valydami ar atlikdami bet kokią techninę priežiūrą, atjunkite įrenginį nuo elektros tinklo.
• Šis prietaisas nėra skirtas naudoti asmenims su ribotais fiziniais, jutiminiais ar protiniais gebėjimais arba asmenims, kuriems trūksta patirties ir žinių, nebent juos prižiūrėtų arba instruktuotų, kaip naudoti prietaisą, už jų saugumą atsakingas asmuo.
• Vaikus reikia prižiūrėti, kad jie nežaistų su prietaisu.

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• KERDE P30A Electric Bidet Toilet Seat
• Montavimo įranga
• Bidė žarna
• Vartotojo vadovas (šis dokumentas)
• Nuotolinio valdymo pultas

Produktas baigtasview

Pagrindinės savybės

• Sėdynės jutiklis: Automatically triggers auto-flush upon standing.
• Dvigubas valdymas: Operable via handheld remote and ergonomic side control panel.
• 3-Temperature Spray: Instantaneous heating of water to low, medium, or high warmth.
• Stainless Steel Nozzle: Self-cleaning before and after each use for hygiene.
• Energijos taupymo režimas: Sumažina energijos suvartojimą.
• Quiet Close Lid: Apsaugo nuo smūgių ir sumažina triukšmą.
• Šildoma sėdynė: Multiple temperature levels for comfort.
• Šilto oro džiovintuvas: Provides a hands-free drying experience.
• LED naktinis apšvietimas: Soft illumination for safe nighttime use.

Dalių pavadinimai

Refer to the diagram below for identification of key components.

The diagram illustrates the main components: the silent pad, remote control, cover, instruction label, flushing nozzle opening, drying outlet, seat sensing point (requires skin contact for activation), control panel, and thermostatic seat.

Montavimas

Before installation, ensure your toilet is compatible with the KERDE P30A bidet seat. This model is designed for elongated toilets. Confirm your toilet dimensions meet the requirements shown in Figure 2.

The bidet seat requires a bolt spread between 3.9 and 8.7 inches (100-220mm) and a front-to-back length of 17.7 to 19.3 inches (450-490mm). The bidet seat itself measures 19.7 inches (500mm) in length and 14.6 inches (360mm) in width. An electrical outlet is required nearby.

Diegimo žingsniai

Norėdami tinkamai įdiegti, atlikite šiuos veiksmus:

1. Paruoškite tualetą: Turn off the water supply to the toilet and flush to empty the tank. Disconnect the existing water supply line from the toilet tank.
2. Prijunkite vandens liniją: Remove the pipe from the toilet tank. Connect the bidet hose to the toilet's water supply.
3. Connect Bidet Seat Water Line: Insert the bidet's water supply tube approximately 0.4 inches into the designated port on the bidet seat.
4. Montavimo plokštės montavimas: Place the rubber stoppers into the toilet bowl holes. Position the mounting plate over the toilet bowl holes, ensuring proper alignment. Insert the mounting bolts and washers, then tighten them securely with a screwdriver.
5. Pritvirtinkite bidė sėdynę: Užmaukite bidė sėdynę ant tvirtinimo plokštelės, kol ji užsifiksuos.
6. Open Water Valve: Turn on the water supply to the toilet. Check for any leaks.
7. Prijunkite maitinimą: Plug the bidet seat into a 120V, 3-hole electrical outlet.

Operacija

The KERDE P30A bidet seat offers dual control options: a handheld remote and an ergonomic side control panel. Both provide access to various functions.

Valdymo skydas baigtasview

The image displays the comprehensive controls available on both the remote and the side panel, including settings for water temperature, seat temperature, air dryer temperature, nozzle position, and various wash modes.

Pagrindinės funkcijos

• Maitinimo įjungimas/išjungimas: Press the "Power" button on the side panel or remote.
• Sėdynės jutiklis: The bidet will only operate when the seat sensor detects a user. Ensure skin contact with the seat.
• Automatinis praplovimas: The built-in seat sensor triggers an automatic flush when the user stands up.
• Galinis plovimas: Activates the rear cleansing function.
• Moteriškas skalbimas: Aktyvuoja moterišką valymo funkciją.
• Oscillate Wash: The nozzle moves back and forth for a wider cleansing area.
• Reguliuojama purkštuko padėtis: Use the "Front" and "Back" buttons to adjust the nozzle's position.
• Vandens slėgio reguliavimas: Use the "+" and "-" buttons to increase or decrease water pressure.
• Šildoma sėdynė: Adjust seat temperature to Low, Middle, or High using the "Seat Temp" button.
• Šilto oro džiovintuvas: Activates the warm air drying function. Adjust air temperature using the "Wind Temp" button.
• Savaime išsivalantis antgalis: The stainless steel nozzle automatically cleans itself before and after each use.
• LED naktinis apšvietimas: Provides gentle illumination for nighttime use.
• Energijos taupymas: Activates the energy-saving mode to reduce power consumption.
• Sustabdyti: Press the "Stop" button to cease any active function.

This image details the various wash modes including Rear Wash, Female Wash, and Oscillate Wash, along with the adjustable nozzle position and the self-cleaning feature of the stainless steel nozzle.

The image highlights the adjustable warm air dryer, the heated seat with multiple temperature settings, and the self-cleaning function of the nozzle, all contributing to a comfortable and hygienic experience.

Priežiūra

Regular maintenance ensures the longevity and hygienic operation of your KERDE P30A bidet seat.

Purkštuko valymas

• The nozzle performs an automatic self-cleaning cycle before and after each use.
• For additional cleaning, activate the "Self-clean" function on the control panel or remote.
• If manual cleaning is required, gently pull out the nozzle and wipe it with a soft cloth and mild, non-abrasive cleaner. Do not use harsh chemicals.

Bidė sėdynės valymas

• Prieš valydami, atjunkite bidė sėdynę nuo elektros lizdo.
• Bidė sėdynės išorinius paviršius nuvalykite minkšta, sausu skudurėliu.amp cloth and a mild, non-abrasive household cleaner.
• Avoid using abrasive cleaners, brushes, or chemical solvents that could damage the surface.
• Įsitikinkite, kad į elektros komponentus nepatenka vanduo.

Winterization (If applicable)

If the bidet seat will be exposed to freezing temperatures, it is recommended to drain all water from the unit to prevent damage. Consult a qualified plumber if unsure.

Trikčių šalinimas

If you encounter issues with your bidet seat, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact KERDE customer support for assistance.

Specifikacijos

Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please refer to the official KERDE website or contact KERDE customer service directly. Contact details are typically provided on the product packaging or the manufacturer's websvetainę.