Bpatoimsx BPMP-10 Steel Tablet Charging Cabinet Lockers User Manual

Svarbi saugos informacija

• Caution: Keep charging cords away from water and other liquids.
• Do not overload compartments.
• Always unplug the power supply before inserting or removing items.
• Keep hands and fingers away from moving parts when opening and closing compartments.
• Nenaudokite, jei jis pažeistas ar sulūžęs.

Produktas baigtasview

The Bpatoimsx BPMP-10 Steel Tablet Charging Cabinet provides a secure and efficient solution for storing and charging up to 10 tablets or similar devices. Each compartment features an independent combination lock and built-in charging cables (Type-C and Apple Lightning) for convenience and security.

Pagrindinės funkcijos:

• 10 Independent Compartments: Each with a 3-digit combination lock for privacy and security.
• Built-in Charging: Each compartment includes Type-C and Apple charging heads, supporting 10-20W fast charging.
• Patvari konstrukcija: Full steel frame for long-lasting use.
• No Complex Installation: Paruoštas naudoti iš karto išpakavus.

1 pav.: priekis view of the Bpatoimsx BPMP-10 Steel Tablet Charging Cabinet with all 10 compartments closed.

2 pav. Vidinis view of the charging cabinet, illustrating the metal welding structure, Type-C and Apple charging heads, and the combination lock mechanism.

Sąrankos instrukcijos

1. Išpakavimas ir įdėjimas

• Carefully remove the charging cabinet from its packaging.
• Place the cabinet on a stable, flat surface, such as a desktop. Ensure adequate ventilation around the unit.

2. Maitinimo prijungimas

• Locate the power input port at the rear of the cabinet.
• Connect the provided power cord to the cabinet and then plug it into a standard electrical outlet.

3 pav.: galinis view of the charging cabinet with the power cord connected, ready for use.

3. Initial Lock Setup (Setting Your Combination)

Each compartment comes with a 3-digit combination lock. The factory default code is typically 0-0-0. To set your personal combination:

1. Ensure the lock is open (set to the current combination, e.g., 0-0-0).
2. Locate the small reset button or lever on the side or bottom of the lock mechanism (refer to the lock itself for exact location).
3. While holding the reset button/lever, set your desired 3-digit combination by rotating the dials.
4. Atleiskite atstatymo mygtuką / svirtį. Jūsų naujas derinys dabar nustatytas.
5. Svarbu: Remember your new combination. There is an administrator key provided for emergency access if the code is forgotten.

Naudojimo instrukcijos

1. Opening a Compartment

1. Rotate the dials on the combination lock to your set 3-digit code.
2. Pull the compartment door open.

2. Charging a Device

• Open the desired compartment.
• Inside, you will find a Type-C and an Apple Lightning charging cable.
• Select the appropriate cable for your device (tablet, smartphone, etc.).
• Connect your device to the charging cable. The device should begin charging automatically.
• Place your device securely within the compartment.

Figure 4: A compartment opened, showing a tablet being charged by the internal cable.

3. Closing and Locking a Compartment

• Ensure your device is properly placed and connected (if charging).
• Tvirtai uždarykite skyriaus dureles.
• Scramble the dials on the combination lock to secure the compartment.

Priežiūra

Valymas

• Before cleaning, always unplug the cabinet from the power outlet.
• Išorinius paviršius nuvalykite minkšta, damp šluoste. Venkite abrazyvinių valiklių ar tirpiklių, kurie gali pažeisti apdailą.
• Ensure no liquid enters the charging ports or electrical components.
• Clean the interior of the compartments as needed with a dry or slightly damp audinys.

Bendroji priežiūra

• Regularly inspect the power cord for any signs of damage. If damaged, discontinue use and contact support.
• Check charging cables inside compartments for wear and tear.
• Ensure the cabinet is placed in a dry environment, away from direct sunlight or extreme temperatures.

Trikčių šalinimas

Įrenginys neįkraunamas

• Patikrinkite maitinimo jungtį: Ensure the cabinet is securely plugged into a working power outlet.
• Patikrinkite kabelio jungtį: Make sure the device is properly connected to the charging cable inside the compartment.
• Try Another Compartment: If one compartment is not charging, try another to determine if the issue is with the compartment or the device.
• Patikrinkite kabelius: Check the internal charging cables for any visible damage.

Combination Lock Not Opening

• Verify Combination: Double-check that you are entering the correct 3-digit combination.
• Administrator Key: If the combination is forgotten, use the provided administrator key to open the compartment. Once open, you can reset the combination following the 'Initial Lock Setup' instructions.

Specifikacijos

Figure 5: Detailed dimensions of the Bpatoimsx BPMP-10 cabinet and its individual compartments.

Garantija ir palaikymas

Informacija apie garantiją

This Bpatoimsx product is covered by a 1 metų garantija from the date of purchase, ensuring protection against manufacturing defects. Please retain your proof of purchase for warranty claims.

Pagalba klientams

For any questions, technical assistance, or warranty claims, please contact Bpatoimsx customer support through the retailer where the product was purchased or refer to the contact information provided with your product packaging.