CREWORKS 10L Ultrasonic Cleaner User Manual

1. Įvadas

This manual provides essential information for the safe and effective operation of your CREWORKS 10L Ultrasonic Cleaner. This machine is designed for thorough cleaning of various items such as lab tools, glasses, jewelry, auto parts, and more, utilizing ultrasonic cavitation and heating capabilities.

Please read this manual carefully before initial use and retain it for future reference.

2. Saugos informacija

Kad išvengtumėte sužalojimų ar įrenginio pažeidimo, laikykitės šių saugos priemonių:

• Neardyti: Unauthorized disassembly may void the warranty and pose electrical hazards.
• Always use sufficient fluid: Ensure the tank is filled to the recommended level before operation to prevent damage to the ultrasonic transducers.
• Avoid flammable liquids: Never use flammable, explosive, or corrosive liquids in the tank.
• Atjunkite, kai nenaudojate: Disconnect the power cord from the outlet when the unit is not in use or before cleaning.
• Tinkama ventiliacija: Užtikrinkite tinkamą vėdinimą aplink įrenginį eksploatacijos metu.
• Laikyti sausą: Do not immerse the main unit in water or other liquids. Avoid splashing water onto the control panel.

Vaizdas: priekis view of the CREWORKS 10L Ultrasonic Cleaner, showing the control panel and a yellow warning label on the lid.

3. Komponentai ir funkcijos

Your CREWORKS 10L Ultrasonic Cleaner includes the following main components:

• Ultrasonic Cleaner Unit (main body with tank)
• Basket (for holding items during cleaning)
• Maitinimo laidas
• Water Pipe (drain valve attachment)

Pagrindinės funkcijos:

• 10L (2.6 Gallon) Capacity: Large stainless steel tank for various items.
• 240W Ultrasonic Power: Generates 40kHz sound waves for effective cavitation.
• 300 W šildymo galia: Adjustable temperature from 70 to 175°F (20-80°C) for enhanced cleaning.
• Laikmačio valdymas: Adjustable cleaning cycles up to 30 minutes.
• Patvari konstrukcija: Stainless steel tank (304 grade) and exterior (201 grade).
• Tylus veikimas: Extra-thick tank wall for noise reduction (below 60 dB).
• Stabilus dizainas: Non-skid rubber feet for secure placement.

Vaizdas: Viršview of key features including control knobs, stainless steel construction, fuses, and dissipation holes.

Vaizdas: Interjeras view of the stainless steel tank, highlighting the 304 food-grade stainless steel construction.

4. Sąranka

1. Išpakuoti: Carefully remove all components from the packaging. Inspect the unit for any signs of damage.
2. Vieta: Ultragarsinį valytuvą pastatykite ant stabilaus, lygaus ir sauso paviršiaus. Užtikrinkite tinkamą vėdinimą aplink įrenginį.
3. Connect Drain Valve (if applicable): Attach the provided water pipe to the drain valve on the side of the unit if you plan to use it for draining.
4. Užpildykite baką: Fill the stainless steel tank with the appropriate cleaning solution (water, or water with a suitable ultrasonic cleaning concentrate) up to the recommended fill line. Do not overfill or underfill. Ensure the items to be cleaned are fully submerged.
5. Įdėti krepšelį: Įdėkite valymo krepšelį į baką.
6. Prijunkite maitinimą: Įjunkite maitinimo laidą į įžemintą elektros lizdą.

5. Naudojimo instrukcijos

Follow these steps to operate your ultrasonic cleaner:

1. Paruoškite daiktus: Place the items to be cleaned into the cleaning basket. Ensure items are not touching each other if possible, and are fully submerged in the cleaning solution.
2. Uždaryti dangtį: Close the lid of the ultrasonic cleaner.
3. Nustatyta temperatūra (neprivaloma): If heating is desired, turn the "TEMPERATURE" knob to select the desired temperature between 70°F and 175°F (20°C and 80°C). The heating indicator light will illuminate. Allow time for the solution to reach the set temperature.
4. Nustatykite valymo laiką: Turn the "TIME" knob to select the desired cleaning duration, up to 30 minutes. The cleaning indicator light will illuminate, and the ultrasonic cleaning process will begin.
5. Monitoriaus procesas: The unit will operate for the set time. You may hear a slight buzzing sound, which is normal during ultrasonic operation.
6. Užbaigimas: Once the set time has elapsed, the unit will automatically stop. The indicator lights will turn off.
7. Pašalinti elementus: Carefully open the lid and remove the cleaning basket with the cleaned items. Rinse items thoroughly with clean water if necessary and dry them.
8. Drenažo sprendimas: After cleaning, it is recommended to drain the used cleaning solution. Place a suitable container under the drain valve and open the valve to empty the tank. Close the valve once empty.

Image: Illustration of how ultrasonic cavitation works to clean items by forming and bursting microscopic bubbles.

Vaizdas: pvzamples of items suitable for cleaning with the ultrasonic cleaner, such as glasses, machine parts, and tools.

6. Priežiūra

Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner:

• Empty and Clean Tank: After each use, especially if using cleaning solutions other than water, drain the tank completely. Rinse the tank interior with clean water and wipe it dry with a soft cloth. Do not use abrasive cleaners or scourers.
• Išorinis valymas: Nuvalykite įrenginio išorę skelbimuamp audinys. Nenaudokite stiprių cheminių medžiagų.
• Saugykla: Nenaudojamą įrenginį laikykite vėsioje, sausoje vietoje.
• Saugiklio keitimas: The unit is equipped with protective fuses. If the unit fails to power on, check and replace the fuses if necessary. Refer to the specifications for fuse type.

7. Problemų sprendimas

Jei kyla problemų dėl ultragarsinio valytuvo, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

• Įrenginys neįsijungia:
  • Patikrinkite, ar maitinimo laidas tvirtai įjungtas į veikiantį elektros lizdą.
  • Patikrinkite, ar maitinimo jungiklis yra „ĮJUNGTA“ padėtyje.
  • Check the fuses. Replace if blown.
• No ultrasonic action (no buzzing sound):
  • Įsitikinkite, kad bakas yra pripildytas pakankamai skysčio.
  • Check if the timer is set and the unit is powered on.
  • Jei problema išlieka, susisiekite su klientų aptarnavimo tarnyba.
• Cleaning results are unsatisfactory:
  • Ensure the cleaning solution is appropriate for the items being cleaned.
  • Padidinkite valymo laiką.
  • Consider using heat to improve cleaning effectiveness.
  • Ensure items are not overcrowded in the basket.

8. Specifikacijos

Image: Dimensional drawing of the ultrasonic cleaner and its basket.

9. Garantija ir palaikymas

For warranty information or technical support, please contact CREWORKS customer service. Keep your purchase receipt and model number (JX-040) handy when contacting support.

You can find contact information on the official CREWORKS websvetainėje arba per pirkimo vietą.