Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the SENSORWORX SWX-852-2-WH Wireless Remote Light Switch. This device is designed to provide manual control of wirelessly controlled lighting systems, acting as a companion switch to compatible SENSORWORX wireless load controllers.
The SWX-852-2-WH is a line-powered wall station that simplifies multi-way switching configurations by reducing wiring complexity and installation time. It communicates wirelessly using an encrypted 915 MHz proprietary protocol, offering reliable operation within specified ranges.
Saugos informacija
ĮSPĖJIMAS: Elektros smūgio pavojus. Netinkamas montavimas gali sukelti sunkius sužalojimus ar mirtį.
- Prieš montuodami, aptarnaudami ar išimdami įrenginį, visada išjunkite maitinimą grandinės pertraukikliu arba saugiklių dėžute.
- Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis visų nacionalinių ir vietinių elektros kodeksų.
- Do not use this device with loads exceeding its specified ratings.
- Įsitikinkite, kad visos laidų jungtys yra tvirtos ir tinkamai izoliuotos.
- Šis prietaisas skirtas naudoti tik patalpose.
Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- SENSORWORX SWX-852-2-WH Wall Switch Sensor
- Vielos laidai
- Tvirtinimo varžtai
- Vielos veržlės
- Instrukcijų vadovas (šis dokumentas)
Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelis | SWX-852-2-WH |
| Veikimo režimas | ĮJUNGTI IŠJUNGTI |
| Dabartinis reitingas | 1 Amps |
| Veiklos ttage | 120-277V (Line Powered) |
| Kontakto tipas | Single Pole Single Throw (SPST) |
| Jungties tipas | Suspausti |
| Jungiklio tipas | Sensor (Remote) |
| Terminalas | Vielos laidai |
| Medžiaga | Plastic (Housing), Silver (Contact) |
| Matmenys (I x P x A) | 1.39 x 1.68 x 2.74 colio |
| Montavimo tipas | Surface Mount (in standard wallbox) |
| Grandinės tipas | 1-way, 3-way, 4-way (with compatible controllers) |
| Darbinė temperatūra | nuo 32 °F iki 122 °F (nuo 0 °C iki 50 °C) |
| Drėgmė | 0-95% nekondensuojantis |
| Belaidis protokolas | Encrypted 915 MHz Proprietary |
| belaidis diapazonas | ~80 feet line of sight, ~40 feet through obstructions |
| Sertifikatai | UL Listed, RoHS Compliant, BAA Compliant, BABA Compliant, TAA Compliant |
| Prekės svoris | 3.88 uncijos |
Sąranka ir diegimas
The SENSORWORX SWX-852-2-WH is designed for straightforward installation in a standard single-gang wallbox, requiring less than 1 inch of mounting depth.
1. Laidai
- Išjunkite maitinimą: Before starting, ensure power to the circuit is OFF at the circuit breaker.
- Atpažinkite laidus: The SWX-852-2-WH is line-powered and requires connection to line (hot) and neutral wires. It does not directly switch the load.
- Prijunkite laidus: Use the provided wire nuts to connect the switch's wire leads to the corresponding building wiring (Line, Neutral). Consult local electrical codes for proper wiring practices.
- Sumontuokite jungiklį: Carefully place the switch into the wallbox, ensuring wires are not pinched. Secure the switch to the wallbox using the provided mounting screws.
- Install wallplate: Attach a standard decorative wallplate (not included) over the switch.
- Atkurti galią: Įjunkite maitinimą grandinės pertraukikliu.
Image: SENSORWORX SWX-852-2-WH Wireless Remote Light Switch. This image shows the front view of the white wall switch, illustrating its compact design for easy installation.
2. Pairing with Wireless Controller
The SWX-852-2-WH must be paired with a compatible SENSORWORX wireless load controller (e.g., SWX-950 series power pack, SWX-851 wireless wall switch, or SWX-874-ELV dimmer) to function. The pairing process is quick and typically takes approximately 3 seconds per device.
- Įsitikinkite, kad įjungtas maitinimas for both the SWX-852-2-WH and the target wireless load controller.
- Įjungti susiejimo režimą on the wireless load controller according to its specific instructions. This usually involves pressing and holding a button on the controller.
- Activate pairing on SWX-852-2-WH: Press and hold the designated button on the SWX-852-2-WH (refer to the specific button layout on your device) until an indicator light confirms pairing mode.
- Patvirtinkite susiejimą: Both devices should provide visual feedback (e.g., LED flashes) to indicate successful pairing. Refer to the controller's manual for specific confirmation signals.
For multi-way switching, additional SWX-852-2-WH units can be paired to the same wireless load controller.
Naudojimo instrukcijos
Once installed and paired, the SWX-852-2-WH operates as a remote control for the linked SENSORWORX wireless load controller.
- ĮJUNGIMO/IŠJUNGIMO valdymas: Press the top button to turn the connected lights ON. Press the bottom button to turn the connected lights OFF.
- Dimming Control (if paired with a dimmer): If paired with a compatible SENSORWORX wireless dimmer (e.g., SWX-874-ELV), the buttons may also provide dimming functionality. Typically, holding the ON button will brighten lights, and holding the OFF button will dim lights. Refer to the dimmer's manual for specific dimming operations.
- Daugiakryptis valdymas: In multi-way setups, any paired SWX-852-2-WH switch can control the same lighting load.
Priežiūra
The SENSORWORX SWX-852-2-WH is designed for long-term, maintenance-free operation. Follow these guidelines for optimal performance:
- Valymas: To clean the surface of the switch, use a soft, damp šluoste. Nenaudokite abrazyvinių valiklių, tirpiklių ar stiprių cheminių medžiagų, nes jos gali pažeisti apdailą.
- Nėra naudotojo aptarnaujamų dalių: Jungiklio viduje nėra dalių, kurias galėtų remontuoti naudotojas. Nebandykite atidaryti ar taisyti įrenginio.
- Aplinkos sąlygos: Kad išvengtumėte pažeidimų, užtikrinkite, kad darbo aplinka neviršytų nurodytų temperatūros ir drėgmės diapazonų.
Trikčių šalinimas
If you experience issues with your SENSORWORX SWX-852-2-WH, consult the following troubleshooting guide:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Switch does not respond to presses. | Jungikliui netiekiama maitinimas. Not properly paired with a controller. Controller is out of range or powered off. | Verify power at the circuit breaker and wiring connections. Re-attempt the pairing process with the wireless load controller. Ensure the wireless load controller is powered on and within range (~40 feet through obstructions). |
| Lights do not turn ON/OFF or dim correctly. | Incorrect pairing. Incompatible controller. Trukdymas. | Confirm successful pairing with the correct SENSORWORX wireless load controller. Ensure the controller is compatible with the SWX-852-2-WH and supports the desired functionality (e.g., dimming). Minimize sources of wireless interference (e.g., large metal objects, other 900 MHz devices). |
| Pertraukiamas veikimas. | Silpnas belaidis signalas. Aplinkos veiksniai. | Relocate the wireless load controller or the SWX-852-2-WH to improve signal strength. Ensure no new obstructions have been introduced. Check for extreme temperatures or humidity outside of specified operating conditions. |
If troubleshooting steps do not resolve the issue, please contact SENSORWORX customer support.
Garantija ir palaikymas
The SENSORWORX SWX-852-2-WH Wireless Remote Light Switch comes with a 5 metų garantija from the date of purchase, covering defects in materials and workmanship under normal use. This warranty is valid only for products purchased from authorized SENSORWORX distributors.
For technical support, warranty claims, or further assistance, please visit the official SENSORWORX website or contact their customer service department. Please have your product model number (SWX-852-2-WH) and proof of purchase available when contacting support.
SENSORWORX products are proudly Made in the USA and comply with UL, RoHS, BAA, BABA, and TAA standards, ensuring high quality and reliability.