Tornado 24 Inch Outdoor Wall Mount Fan Instruction Manual

Įvadas

Thank you for choosing the Tornado 24 Inch Outdoor Wall Mount Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your fan. Please read these instructions thoroughly before use and retain them for future reference.

This high-velocity, IPX4 water-resistant fan is designed for industrial and commercial use, delivering powerful airflow up to 7350 CFM. It features a durable construction with rust-resistant aluminum and powder-coated steel, a TEAO ball bearing motor, and cETL listing for safety.

Svarbios saugos instrukcijos

• Always disconnect the fan from the power source before cleaning, servicing, or moving.
• Nenaudokite ventiliatoriaus, kurio laidas ar kištukas pažeistas. Išmeskite ventiliatorių arba grąžinkite jį į įgaliotą techninės priežiūros įstaigą patikrinti ir (arba) taisyti.
• Netieskite laido po kilimu. Neuždenkite laido kilimėliais, bėgiais ar panašiomis dangomis. Laidą laikykite toliau nuo eismo zonos ir ten, kur jis neužkliūtų.
• Kad apsisaugotumėte nuo elektros smūgio, nemerkite įrenginio, kištuko ar laido į vandenį ir nepurkškite skysčių.
• Atidžiai prižiūrėti būtina, kai bet kurį prietaisą naudoja vaikai arba jį naudoja šalia vaikų.
• This fan is equipped with a GFCI plug to meet U.S. outdoor electrical safety standards. Do not bypass or modify the GFCI plug.
• Ensure the fan is securely mounted to a stable surface before operation.
• Keep hands, hair, clothing, and other objects away from the fan blades during operation to prevent injury.
• Nenaudokite šio ventiliatoriaus su jokiu kietojo kūno greičio reguliavimo įtaisu.

Pakuotės turinys

Prieš pradėdami montavimą, patikrinkite, ar yra visi komponentai.

• Tornado 24 Inch Outdoor Wall Mount Fan Head
• Sienos laikiklis
• Power Cord with GFCI Plug (10 ft SJTW)
• Assembly Hardware (nuts, bolts, washers)
• Instrukcijų vadovas

Pastaba: Mounting bolts (three M8x80 expansion bolts) for concrete or metal surfaces are neįtraukta ir juos reikia įsigyti atskirai.

Sąranka ir diegimas

1. Išpakuokite ir patikrinkite: Atsargiai išimkite visus komponentus iš pakuotės. Patikrinkite, ar nėra kokių nors pažeidimų, atsiradusių transportavimo metu.
2. Surinkite ventiliatoriaus mentes: Attach the fan blades to the motor shaft. Ensure the set screw on the fan hub is positioned TOWARDS the motor for correct airflow direction. Incorrect blade installation will result in poor air movement.
3. Pritvirtinkite groteles: Secure the front and rear grilles around the fan blades. Ensure they are properly aligned and fastened to prevent accidental contact with moving parts.
4. Montavimo vieta: Choose a suitable mounting location on a concrete or metal surface. This fan is not recommended for wood wall installation. Consider the fan's dimensions (27.1"D x 18.8"W x 32"H) and ensure adequate clearance for oscillation and tilt.
   

   1 pav.: Ventiliatoriaus matmenys

5. Sieninio laikiklio montavimas: Using three M8x80 expansion bolts (not included), securely fasten the wall mount bracket to your chosen concrete or metal surface. Ensure the bracket is level and capable of supporting the fan's weight (approximately 26.46 lbs). The bracket design positions the fan approximately 10 inches off the wall.
6. Pritvirtinkite ventiliatorių prie laikiklio: Mount the assembled fan head onto the installed wall bracket, securing it with the provided hardware. Double-check all connections to ensure stability.

Naudojimo instrukcijos

The Tornado 24 Inch Outdoor Wall Mount Fan offers two speed settings, oscillation, and vertical tilt for optimal airflow control.

1. Maitinimo jungtis: Plug the fan's 10-foot SJTW power cord into a standard 120V AC outlet. The integrated GFCI plug provides enhanced safety for outdoor use.
2. Greičio valdymas: Use the pull chain switch located on the fan motor to cycle through the two speed settings:
   • Pull 1: Low Speed (6450 CFM)
   • Pull 2: High Speed (7350 CFM)
   • 3 traukimas: Išjungta
   

   Figure 2: Fan Speed Settings

3. Virpesių valdymas: The fan features 75° side-to-side oscillation. To activate or deactivate oscillation, use the knob located on the top of the fan motor housing.
4. Vertikalus pakreipimo reguliavimas: The fan head can be manually tilted up to 25° vertically. Loosen the adjustment knob on the side of the fan, set the desired angle, and then tighten the knob to secure the position.
   

   Figure 3: Oscillation and Tilt Features

Priežiūra

Reguliarus ventiliatoriaus remontas užtikrina optimalų veikimą ir prailgina jo tarnavimo laiką.

• Valymas: Disconnect the fan from the power source before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces and grilles. Do not use abrasive cleaners or immerse the fan in water. For stubborn dirt, a mild soap solution can be used. Ensure the fan is completely dry before reconnecting to power.
• Variklis: The TEAO (Totally Enclosed Air Over) ball bearing motor is designed for durability and requires minimal maintenance. Do not attempt to lubricate the motor.
• Saugykla: If storing the fan for an extended period, clean it thoroughly and store it in a dry, cool place, protected from dust and moisture.

Trikčių šalinimas

Specifikacijos

Figure 4: IPX4 Water Resistance and Certifications

Informacija apie garantiją

This Tornado 24 Inch Outdoor Wall Mount Fan comes with a 1 metų ribota garantija. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, or to make a warranty claim, please refer to the warranty documentation included with your purchase or contact customer support.

Pagalba klientams

For technical assistance, troubleshooting, or warranty inquiries, please contact Tornado customer support.

• Websvetainė: Visit the official Tornado webDUK ir pagalbos išteklių svetainė.
• El. paštas: Norėdami sužinoti klientų aptarnavimo el. pašto adresą, žr. savo gaminio pakuotę arba garantijos kortelę.
• Telefonas: Klientų aptarnavimo telefono numerį rasite ant gaminio pakuotės arba garantijos kortelės.

When contacting support, please have your model number (HI-FAN-24MOWF-WR-1P-HEX2) and purchase date available.