Povlen TH570-Y
Povlen TH570-Y 5-in-1 Stud Finder Wall Scanner Detector User Manual
Model: TH570-Y
1. Įvadas
The Povlen TH570-Y is an advanced 5-in-1 electronic wall scanner designed to accurately detect studs, metal objects, pipes, and live AC wires behind various wall materials. This device helps users locate hidden objects before drilling, cutting, or performing other wall modifications, ensuring safety and preventing damage.
Image: The Povlen TH570-Y stud finder, highlighting its upgraded model features for improved accuracy and stability.
2. Saugos informacija
- Always read and understand this manual before operating the device.
- Do not rely solely on the stud finder to locate live AC wires. Always turn off power to the area before drilling or cutting into walls.
- Laikykite prietaisą sausą ir švarų. Venkite ekstremalių temperatūrų ar drėgmės.
- Nebandykite atidaryti ar modifikuoti įrenginio. Remontą turėtų atlikti tik kvalifikuoti specialistai.
- Atsakingai išmeskite baterijas pagal vietinius reikalavimus.
3. Produkto ypatybės
- Enhanced Precision and Speed: Locates edges and centers of metal, studs, joists, pipes, and live AC wires with high accuracy.
- Five Scanning Modes:
- Smeigės nuskaitymas: Detects wood and metal studs up to 0.5 inches (13 mm) deep.
- Deep Stud Scan 1: Detects wood and metal studs up to 1 inch (25 mm) deep.
- Deep Stud Scan 2: Detects wood and metal studs up to 1.5 inches (38 mm) deep.
- Metalo skenavimas: Detects metal objects (e.g., rebar, pipes) up to 2.36 inches (60 mm) deep.
- Kintamosios srovės nuskaitymas: Detects live unshielded AC wires up to 2 inches (51 mm) deep.
- Patvarus dizainas: Shock-resistant and dust-resistant for long-lasting use.
- Skaidrus LCD ekranas: Backlit screen shows center and edge indications, mode, and battery status.
- Garsiniai įspėjimai: Provides audible signals for detection.
- Continuous Live Wire Alert: Alerts for live AC wires in all scanning modes.
Image: Illustration of the five scanning modes (Stud 1/2", 1", 1 1/2", Metal, AC) and their respective detection depths.
4. Pakuotės turinys
- Povlen TH570-Y Stud Finder
- Vartotojo vadovas (šis dokumentas)
- Batteries (Alkaline, pre-installed or included)
5. Sąranka
5.1 Akumuliatoriaus įdėjimas
The Povlen TH570-Y requires alkaline batteries for operation. Ensure batteries are correctly installed before use.
- Suraskite baterijų skyriaus dangtelį įrenginio gale.
- Pastumkite arba atidarykite dangtelį.
- Insert the required batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.
6. Naudojimo instrukcijos
6.1 Maitinimo įjungimas/išjungimas
To power on the device, press and hold the "ON/OFF" button. To power off, press and hold the "ON/OFF" button again until the display turns off, or the device will automatically power off after a period of inactivity.
6.2 Režimo pasirinkimas
Press the "MODE" button to cycle through the available scanning modes: Stud 1/2", Stud 1", Stud 1 1/2", Metal, and AC. The selected mode will be indicated on the LCD display.
Vaizdas: Išsamus view of the stud finder's display and buttons, including Power Button, Mode Button, Scan Button, Direction Indicator, and Mode Indicator.
6.3 Skenavimo procedūra
For accurate readings, the device must be calibrated against the wall surface before each scan. Calibration ensures the sensor is adjusted to the wall's density.
- Kalibruoti: Place the stud finder flat against the wall where you intend to start scanning. Ensure there are no studs, metal, or wires in the immediate area. Press and hold the "ON/OFF" button. Keep the device still against the wall until the calibration is complete (usually a few seconds). The display will show "CENTER" or a similar indication when ready. Release the "ON/OFF" button.
- Pasirinkite režimą: Choose the appropriate scanning mode using the "MODE" button.
- Nuskaityti: While holding the "ON/OFF" button, slowly slide the device horizontally across the wall surface. Maintain constant contact with the wall.
- Detect Edge: As the device moves over the edge of a stud, the signal strength bars will increase, and an edge indicator may appear.
- Locate Center: Continue sliding until the "CENTER" indicator appears on the display, accompanied by an audio alert. This indicates the center of the stud.
- Verify and Mark: For best accuracy, scan the area from both directions and mark the center point where the "CENTER" indicator consistently appears.
Image: Step 1 of scanning: Calibrating the device by pressing the power button against a clear wall section.
Image: Step 3 of scanning: Slowly moving the stud finder across the wall surface.
Image: The stud finder indicating the edge of a stud as it is moved across the wall.
Image: The stud finder indicating the center of a stud, with a user marking the detected location.
Image: The stud finder's display showing how it indicates the exact center and edge of a stud with visual and audio alerts.
6.4 Įtampos laidų, veikiančių kintamąją srovę, aptikimas
The device provides continuous live AC wire alerts in all modes. If a live AC wire is detected, a specific icon (e.g., lightning bolt) will appear on the display, and an audio alert will sound. Exercise extreme caution when live wires are indicated.
Image: A user detecting a live AC wire with the stud finder, emphasizing safety before drilling.
7. Priežiūra
- Valymas: Nuvalykite prietaisą minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Saugykla: Store the stud finder in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
- Baterijos keitimas: Replace batteries when the low battery indicator appears on the display to ensure optimal performance.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | Neišsikrovusios arba neteisingai įdėtos baterijos. | Check battery polarity or replace with new alkaline batteries. |
| Netikslūs rodmenys arba klaidingai teigiami rezultatai. | Improper calibration; moisture in wall; presence of other materials. | Recalibrate the device on a clear section of the wall. Ensure the wall is dry. Scan from multiple directions. |
| Device constantly beeps or shows AC warning. | Live AC wires are present; high electromagnetic interference. | Proceed with extreme caution. Turn off power to the area if possible. Avoid scanning near strong electrical fields. |
| Cannot find studs in deep scan mode. | Wall material too thick; object beyond detection depth. | Ensure you are using the correct deep scan mode. Detection depth limits apply to different materials. |
9. Specifikacijos
| Modelio numeris | TH570-Y |
| Stud Detection Depth | Iki 1.5 colių (38 mm) |
| Metalo aptikimo gylis | Iki 2.36 colių (60 mm) |
| Įtampos kintamosios srovės laidų aptikimo gylis | Iki 2 colių (51 mm) |
| Maitinimo šaltinis | Maitinamas baterijomis (šarminėmis) |
| Prekės svoris | 1.76 uncijos |
| Pakuotės matmenys | 7.76 x 3.39 x 1.65 colio |
| Spalva | Black-yellow |
10. Garantija ir palaikymas
10.1 Informacija apie garantiją
This product is covered by a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the documentation provided at the time of purchase or contact customer support.
Išplėstinės apsaugos planus galima įsigyti atskirai. Dėl galimų variantų, pavyzdžiui, 3 metų arba 4 metų apsaugos planų, kreipkitės į savo pardavėją.
10.2 Pagalba klientams
For technical assistance, troubleshooting, or general inquiries about your Povlen TH570-Y Stud Finder, please contact Povlen customer support. Contact information can typically be found on the product packaging or the official Povlen websvetainę.
Manufacturer: Povlen
For online inquiries, you may visit the Povlen Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.