1. Įvadas
Ačiū, kad pirkoteasing the GSEICE 6L Dual Tank Slush Machine. This appliance is designed for rapid freezing and mixing of various frozen beverages, including slush, smoothies, cocktails, milkshakes, and frappes. Its independent control system allows for simultaneous preparation of different drinks, making it suitable for both commercial and home use. This manual provides essential information for safe and efficient operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your machine.

Image: The GSEICE 6L Dual Tank Slush Machine, showcasing its dual tanks and ready-to-serve frozen drinks.
2. Saugos instrukcijos
Prieš naudodami įrenginį, atidžiai perskaitykite visas saugos instrukcijas, kad išvengtumėte sužalojimų ar žalos.
- Always ensure the machine is unplugged from the power outlet before cleaning, maintenance, or assembly/disassembly of parts.
- Do not immerse the main unit of the machine in water or any other liquid. Wipe the exterior with a damp audinys.
- Prietaisą laikykite vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
- Ensure adequate ventilation around the machine during operation. Do not block air vents.
- Only use ingredients with a sugar content between 13% and 18%. Using mixtures with insufficient sugar can damage the machine.
- If preparing alcoholic frozen drinks, ensure the alcohol content of the mixture is 13% or less. Higher alcohol content may prevent proper freezing or damage the machine.
- Do not operate the machine with only water or unsweetened ingredients.
- Use only the provided power cord and ensure it is not damaged.
- If the machine malfunctions or shows signs of damage, discontinue use immediately and contact customer support.

Image: Important notes regarding ingredient sugar and alcohol content for safe operation.
3. Produktas baigtasview
The GSEICE Slush Machine features a robust design with user-friendly components for efficient beverage preparation.
Pagrindinės funkcijos:
- Dual Tanks: Two independent 3-liter tanks (6L total capacity) allow for simultaneous preparation of different flavors.
- Rapid Freezing: Equipped with a powerful compressor for quick cooling and mixing, producing frozen drinks in approximately 25-120 minutes depending on environmental conditions and ingredient temperature.
- Išmanusis valdymo skydas: Features an upgraded panel with real-time temperature display and intuitive controls.
- 5 iš anksto nustatyti režimai: Easily switch between modes for Frozen Drink, Smoothie, Cocktail, Milkshake, and Frappe with a single button.
- Patvari konstrukcija: Made with a 304 stainless steel body and food-grade, impact-resistant PC tanks for rust prevention and long-term durability.
- Mažo triukšmo veikimas: Designed to operate at a low noise level (≤60dB).
- Kompaktiškas dizainas: Space-saving dimensions (490x320x545mm) and a weight of 25kg make it suitable for various settings.
- Integruotas LED apšvietimas: An illumination button activates internal LED lights, enhancing the visual appeal of the drinks, especially in low-light environments.
- Nuimamas lašų padėklas: Lengvam valymui ir priežiūrai.
Komponentai:
- Pagrindinis vienetas
- Spiral Stirrers (2)
- Plunger Seal Rings (4)
- Mouse Seal Rings (2)
- Back Bowl Seal Rings (2)

Image: User-friendly design elements including the triangular handle and removable drip tray.

Image: Details on the quality materials and efficient spiral design.

Image: Compact dimensions and low noise feature of the machine.
4. Sąranka
Follow these steps to set up your slush machine before first use.
Pradinis surinkimas:
- Apply petroleum jelly to the mouse seal ring and place it into the slot at the front of the spiral stirrer.
- Apply petroleum jelly to the back bowl seal ring and attach it to the cylinder base.
- Gently push and rotate the spiral stirrer into place.
- Secure the spiral stirrer with the tightening screw.
- Install the beverage bowls onto the main unit.
- Lock the bowl tightening nuts to secure the bowls.

Image: Detailed steps for assembling the internal components.
5. Naudojimo instrukcijos
Operating your GSEICE Slush Machine is straightforward with its intelligent control panel.
Paruošimas ir veikimas:
- Mišinio paruošimas: Mix your desired ingredients thoroughly in a separate container. Ensure the sugar content is between 13-18% and alcohol content is 13% or less.
- Pour into Bowls: Carefully pour the prepared mixture into the machine's tanks. Do not overfill.
- Pasirinkite režimą: Use the control panel to select one of the 5 preset modes: Frozen Drink, Smoothie, Cocktail, Milkshake, or Frappe. The panel displays real-time temperature.
- Wait for Freezing: The machine will begin the freezing and mixing process. This typically takes 25-120 minutes, depending on the ambient temperature and initial mixture temperature.
- Patiekti: Once the desired consistency is reached, dispense your delicious frozen beverage using the tap.
Valdymo skydelio funkcijos:
- Iš anksto nustatytas mygtukas: Cycles through the 5 beverage modes.
- Illumination Button: Activates the internal LED lights to enhance drink presentation.
- Temperatūros rodymas: Shows the real-time temperature of the mixture.
- Skalavimo funkcija: Press and hold the 'Rinse' button for 3 seconds to activate the automatic cleaning mode.

Image: The intelligent control panel with preset modes.

Image: The illumination feature enhancing the visual appeal of the drinks.

Image: Simple steps for preparing and operating the machine.
6. Priežiūra ir valymas
Regular cleaning and maintenance ensure hygiene and extend the lifespan of your machine.
Kasdienis valymas:
- Drain Remaining Liquid: After use, drain any remaining beverage from the tanks.
- Pridėti vandens: Fill the tanks with clean water.
- Activate Rinse Mode: Press the 'Rinse' button once to activate the automatic cleaning cycle. The stirrers will rotate to clean the interior.
- Išleiskite vandenį: Once the rinse cycle is complete, drain the water from the tanks. Repeat if necessary.
- Nuvalykite: Nuvalykite aparato išorę švaria,amp audinys. Nenaudokite abrazyvinių valiklių.
Periodinė priežiūra:
- Išvalykite lašelių padėklą: The drip tray is removable for easy cleaning. Empty and wash it regularly.
- Patikrinkite sandariklius: Periodically check the plunger seal rings, mouse seal rings, and back bowl seal rings for wear and tear. Replace if damaged to prevent leaks.
- Švarios oro angos: Ensure the air vents on the sides of the machine are free from dust and debris to maintain proper cooling.

Image: Easy cleaning method for the slush machine.
7. Problemų sprendimas
If you encounter any issues with your slush machine, refer to the following common problems and solutions.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Machine not freezing / Mixture too thin | Insufficient sugar content in mixture (below 13%). Aplinkos temperatūra per aukšta. Mixture temperature too high. | Adjust sugar content to 13-18%. Dirbkite vėsesnėje aplinkoje. Pre-chill mixture before adding to tanks. |
| Mixture too thick / Freezing too hard | Excessive sugar content in mixture (above 18%). Aplinkos temperatūra per žema. | Reduce sugar content. Operate in a warmer environment or adjust settings if available. |
| Leaking from tanks | Seals are improperly installed or damaged. Tank not properly secured. | Re-install seals correctly, ensuring they are lubricated with petroleum jelly. Check and tighten tank securing nuts. Pakeiskite pažeistus sandariklius. |
| Mašina neįsijungia | Maitinimo laidas netinkamai prijungtas. Nėra elektros iš lizdo. Suveikė vidinis saugiklis. | Patikrinkite maitinimo laido jungtį. Išbandykite lizdą su kitu prietaisu. Kreipkitės pagalbos į klientų aptarnavimo tarnybą. |
| Neįprastas triukšmas veikimo metu | Normal operation noise (compressor, stirrer). Laisvos dalys. Variklio gedimas. | Įsitikinkite, kad visos dalys yra saugiai sumontuotos. If noise is excessive or unusual, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact GSEICE customer support for further assistance.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | GSEICE |
| Modelio numeris | RLZ3*2-JP |
| Talpa | 6 Liters (2 x 3L tanks) |
| Gaminio matmenys (I x P x A) | 49 cm x 32 cm x 54.5 cm |
| Produkto svoris | 25 kg |
| Maitinimo šaltinis | Single phase 100V / 50/60Hz |
| Energijos suvartojimas | 470W |
| Nominali srovė | 4.9A |
| Aušinimo būdas | Oro aušinimas |
| Aplinkos temperatūros diapazonas | 10-33°C |
| Užšalimo laikas | Approx. 25-120 minutes (depending on conditions) |
| Gamybos metai | 2025 |
| Kilmės šalis | Kinija |

Image: Main specifications of the GSEICE Slush Machine.
9. Garantija ir palaikymas
GSEICE is committed to providing high-quality products and excellent customer service.
Informacija apie garantiją:
Šis produktas tiekiamas su a 1 metų gamintojo garantija nuo įsigijimo datos. Garantija taikoma medžiagų ir gamybos defektams įprasto naudojimo sąlygomis. Išsaugokite pirkimo įrodymą, jei norėtumėte pateikti pretenzijas dėl garantijos.
Klientų aptarnavimas:
If you have any questions, concerns, or require technical assistance, please do not hesitate to contact our customer support team.
- Pagalba el. paštu: Available 24 hours a day, 365 days a year. We aim to respond to all email inquiries within 24 hours.
- Phone Support Hours (JST):
Weekdays: 10:00 AM - 1:00 PM and 2:30 PM - 6:00 PM
Closed on Saturdays, Sundays, and public holidays.
For more information or to contact support, please visit the GSEICE Brand Store.