MOUNTUP Heavy Duty Single Monitor Arm and VESA Extender User Manual

Svarbi saugos informacija

Please read this manual carefully before installation and use. Keep this manual for future reference.

• Svorio talpa: Neviršykite maksimalaus svorio apribojimo – 15 kg (33 svarų). Viršijus šią ribą, galite sunkiai susižaloti arba sugadinti turtą.
• Monitoriaus dydis: The monitor arm supports monitors up to 42 inches. The VESA extender supports monitors from 17 to 35 inches. Ensure your monitor's size and weight are within these limits.
• VESA suderinamumas: The arm supports VESA patterns 75x75mm and 100x100mm. The extender converts these to 200x100mm and 200x200mm. Verify your monitor's VESA pattern before installation.
• Stalo storis: C-clamp requires a desk thickness between 0.39 inches (10mm) and 2.76 inches (70mm). Ensure your desk can support the combined weight of the arm, monitor, and extender.
• Surinkimas: Assemble the product according to the instructions. Improper assembly may cause damage or serious personal injury.
• Judančios dalys: This product contains moving parts. Exercise caution during adjustment to avoid pinching or crushing injuries.
• Priežiūra: Periodically check all screws and connections to ensure they are secure. Retighten as necessary.

Pakuotės turinys

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact MOUNTUP customer support.

• Monitoriaus svirties mazgas
• C-Clamp Bazė
• VESA Extender Bracket (2 pieces)
• VESA Extender Plate
• Hardware Kit (screws, washers, spacers, Allen wrenches)

Vaizdas: Viršview of the MOUNTUP Heavy Duty Single Monitor Arm, including the main arm, C-clamp, and the VESA extender components.

Specifikacijos

Image: Illustration highlighting the monitor arm's robust load capacity of up to 33 lbs.

Image: Diagram showing the monitor arm's height adjustment range from 9.3 to 22.1 inches and a maximum extension of 23.8 inches.

Sąranka ir diegimas

Step 1: Install the C-Clamp Bazė

1. Įdėkite C-clamp pagrindas ant stalo krašto.
2. Ensure the desk thickness is between 0.39 and 2.76 inches.
3. Priveržkite C-clamp varžtą, kol pagrindas bus tvirtai pritvirtintas prie stalo. Neperveržkite.

Image: The monitor arm's C-clamp securely attached to a desk, demonstrating its stable mounting.

Image: A visual comparison highlighting the wider and more stable design of the MOUNTUP C-clamp compared to a standard clamp.

Step 2: Assemble the VESA Extender (if needed)

If your monitor has a VESA pattern larger than 100x100mm (e.g., 200x100mm or 200x200mm), use the VESA extender bracket.

1. Attach the two extender brackets to the VESA extender plate using the provided screws. Ensure the ridge on the extender plate aligns with the brackets for a secure fit.
2. Securely fasten the extender assembly to your monitor's VESA mounting holes using the appropriate screws from the hardware kit.

Image: Step-by-step visual guide for assembling the VESA extender brackets onto the main plate using screws.

Paveikslėlis: detalus view of the VESA extender plate, showing its design for adapting to various VESA patterns.

Image: A diagram illustrating the various VESA patterns (200x100mm, 150x150mm, 200x200mm, 100x200mm) supported by the extender.

Image: A visual comparison showing a monitor that previously could not be mounted (before) and how the VESA extender enables mounting for larger VESA patterns (after).

Step 3: Attach Monitor to Arm

1. Slide the monitor (with or without the VESA extender attached) onto the VESA head of the monitor arm.
2. Secure the monitor to the VESA head using the provided screws. Ensure all screws are tightened to prevent the monitor from detaching.

Naudojimo instrukcijos

Monitoriaus padėties reguliavimas

The MOUNTUP monitor arm allows for flexible adjustment of your monitor's position to achieve optimal ergonomics.

• Aukščio reguliavimas: Gently push or pull the monitor up or down to the desired height. The gas spring mechanism will hold it in place.
• Pakreipimo reguliavimas: Tilt the monitor screen up or down to reduce glare and find a comfortable viewing kampas.
• Sukimosi reguliavimas: Rotate the monitor horizontally (left or right) to share your screen or change viewkryptimi.
• Sukimosi reguliavimas: Pasukite monitorių 360 laipsnių kampu, kad perjungtumėte tarp horizontalios ir vertikalios orientacijos.

Įtempimo reguliavimas

If the monitor arm is too stiff or too loose, you may need to adjust the gas spring tension.

• Locate the tension adjustment screw on the arm (usually near the pivot points).
• Use the provided Allen wrench to turn the screw:
  • Pasukite pagal laikrodžio rodyklę (-) į sumažinti tension (for lighter monitors or if the arm is too stiff).
  • Pasukite prieš laikrodžio rodyklę (+) į padidinti įtempimas (jei monitorius sunesnis arba jei laikiklis nusviręs).
• Adjust gradually and test the arm's movement after each adjustment until it holds your monitor securely at any position.

Priežiūra

• Valymas: Wipe the monitor arm and VESA extender with a soft, damp šluoste. Venkite naudoti abrazyvinius valiklius ar tirpiklius, kurie gali pažeisti apdailą.
• Periodiniai patikrinimai: Regularly inspect all screws and connections (C-clamp, VESA plate, arm joints) to ensure they remain tight. Retighten any loose fasteners to maintain stability and safety.
• Tepimas: The gas spring mechanism is maintenance-free and does not require lubrication.

Trikčių šalinimas

Monitor Sags or Does Not Hold Position

• Sprendimas: The gas spring tension is likely too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise (+) with the provided Allen wrench until the arm can hold the monitor in place.
• Check Weight: Ensure your monitor's weight is within the 4.4 - 33 lbs capacity.

Arm is Too Stiff to Move

• Sprendimas: The gas spring tension is likely too high. Decrease the tension by turning the adjustment screw clockwise (-) with the provided Allen wrench.

Monitor Wobbles

• Sprendimas: Check if the C-clamp is securely tightened to the desk. Ensure all VESA mounting screws are tight. Verify that the monitor arm joints are properly secured.
• Desk Stability: Ensure your desk itself is stable and not prone to wobbling.

Garantija ir palaikymas

MOUNTUP products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official MOUNTUP websvetainę.

If you encounter any issues or have questions regarding the installation or operation of your MOUNTUP Heavy Duty Single Monitor Arm and VESA Extender, please contact MOUNTUP customer support for assistance.

Kontaktinė informacija: Please refer to your product packaging or the MOUNTUP official websvetainę, kurioje rasite naujausią klientų aptarnavimo kontaktinę informaciją.