RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Įvadas

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Sąranka

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Išpakavimas ir pradinė apžiūra

• Atsargiai išimkite visus komponentus iš pakuotės.
• Patikrinkite, ar yra visi pakavimo sąraše išvardyti daiktai.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Valdiklio prijungimas

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Maitinimas per Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Išorinis maitinimo adapteris: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Kameros jungtys:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serijinis valdymas: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

2.2 pav.: pvz.ample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Tinklo konfigūracija

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web sąsają įvesdami savo IP adresą į a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• Per web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operacija

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Baigtaview valdikliai

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

3.2 pav.: Išsamus view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Kameros pasirinkimas

• Greito pasirinkimo mygtukai: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Skaitmeninė klaviatūra: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press ENTER.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ valdymas

• kreiptuką: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT greičio rankenėlė: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview režimu.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Paspauskite AUTOMATINIS FOKUSAS button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• FONINIO APŠVIETIMO mygtukas: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 išankstiniai nustatymai

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENTER išsaugoti. Paspauskite ESC išeiti.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENTER to recall. Press ESC išeiti.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Meniu naršymas

• MENIU mygtukas: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENTER confirms selections, and ESC acts as a back button.

4. Priežiūra

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Valymas

• Use a soft, dry cloth to clean the exterior of the controller.
• Įsisenėjusiam purvui šiek tiek pamirkykiteampnuvalykite šluostę vandeniu arba švelniu, neabrazyviniu valymo tirpalu.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Saugykla

• Kai ilgesnį laiką nenaudojate valdiklio, laikykite jį vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Saugokite prietaisą nuo dulkių ir drėgmės.

5. Problemų sprendimas

Šiame skyriuje pateikiami dažniausiai pasitaikančių problemų, su kuriomis galite susidurti, sprendimai.

5.1 Nėra galios

• Patikrinkite maitinimo šaltinį: Įsitikinkite, kad maitinimo adapteris yra tvirtai prijungtas tiek prie valdiklio, tiek prie veikiančio maitinimo lizdo.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Kabelio vientisumas: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Tinklo ryšys: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Protokolo neatitikimas: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• Kameros ID: Ensure the correct camera ID is selected on the controller.
• Prisijungimo kredencialai: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web sąsaja.
• Serijinis ryšys: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support websvetainė naujinimams.

5.3 LCD ekrano problemos

• Nėra ekrano: Įsitikinkite, kad valdiklis įjungtas.
• Pritemdytas ekranas: Check if there are any brightness settings on the controller that can be adjusted.

6. Specifikacijos

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Produkto vaizdo demonstracija

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official websvetainę.

• Gamintojas: Xiamen RGBlink Science & Technology Co.,Ltd.
• Oficialus Websvetainė: www.rgblink.com (Pastaba: tai yra vietos žymeklis URL, dėl tinkamos pagalbos žr. savo produkto pakuotę arba oficialius dokumentus websvetainę.)
• Kontaktinė informacija: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.