DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Saugos informacija

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Dirbdami su šiuo gaminiu visada dėvėkite apsauginius akinius arba apsauginius akinius su šoniniais skydeliais ir, jei reikia, visą veido skydelį.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Produktas baigtasview

Pakuotės turinys

• Belaidis Bradas Naileris
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0 Ah ličio jonų baterija
• 1 valandos greitas įkroviklis
• Dėklas nešiojimui
• Instrukcijų vadovas

Įrankio komponentai

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Matmenys ir svoris

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Ilgis: 10.83 colio (27.5 cm)
• Plotis: 9.45 colio (24 cm)
• Weight: 6.19 lbs (without battery)

3. Sąranka

Akumuliatoriaus montavimas

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Sulygiuokite bateriją su įrankio baterijos lizdu.
3. Įstumkite bateriją į lizdą, kol ji tvirtai užsifiksuos vietoje.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Paspauskite atleidimo mygtuką ir ištraukite žurnalo dangtelį.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Uždarykite žurnalo dangtelį, kol jis užsifiksuos su atleidimo mygtuku.

Nagas Viewer langas

Nagas viewer window allows you to quickly check the fastener level. When the window shows raudona, it indicates the magazine is without nails. When it shows juodas, it indicates the magazine contains nails.

4. Naudojimo instrukcijos

Šaudymo režimai

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

4 pav.: Uždegimo režimo pasirinkimo jungiklis.

Vieno degimo režimas

• Shift the mode switch to the kairėje pusėje (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Kontaktinio šaudymo režimas

• Shift the mode switch to the dešinėje pusėje (contact firing icon).
• Paspauskite gaiduką.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Pastaba: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Gylio reguliavimas

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED apšvietimas

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED indikatorius

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Raudona įjungta: Senka baterija.
• Mirksi raudonai: Nails/staples are jammed.
• Žalia: No nails/staples in the magazine.
• Mirksi žaliai: Perkaisti.
• Išjungti šviesą: Normali veikimo būsena.

Oficialus produkto vaizdo įrašas

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Priežiūra

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Akumuliatoriaus priežiūra

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Akumuliatorių laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.

6. Problemų sprendimas

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Specifikacijos

Compatible Fasteners

Figure 9: Compatible nail and staple types.

8. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH websvetainę. Kreipdamiesi į palaikymo tarnybą, būtinai turėkite po ranka savo modelio numerį (024009) ir pirkimo informaciją.