Insoma Water Timer SGW01 Instruction Manual

1. Produktas baigtasview

The Insoma Water Timer SGW01 is designed to automate your garden and lawn watering, providing convenience and efficient water management. This 1-zone outdoor hose timer features Auto, Manual, and Rain Delay modes, along with a Child Lock function for enhanced control and safety.

Pagrindinės funkcijos:

• Lengvas programavimas: Customize start time, watering frequency (every 1-23 hours or 1-15 days), and duration (1-360 minutes).
• Rankinis laistymas: Initiate watering on demand without altering preset schedules.
• Lietaus vėlavimas: Pause scheduled watering for 1 to 15 days to conserve water during rainfall.
• Užraktas nuo vaikų: Prevents accidental changes to programming.
• Didelis LCD ekranas: Clear display of current time, start time, frequency, duration, next watering time, and battery level.
• Patvarus dizainas: IPX5 waterproof rating, anti-UV coating, anti-rust materials, and a sealed battery cover for outdoor use.
• Diegimas be įrankių: Features a 360° swivel inlet and metal filter.

Figure 1: Insoma Water Timer SGW01 with highlighted features.

2. Montavimas

Follow these steps to properly install your Insoma Water Timer.

1. Akumuliatoriaus montavimas:
   • Raskite baterijų skyrių laikmačio gale.
   • Open the compartment and insert two (2) AA 1.5V Alkaline batteries (not included), ensuring correct polarity (+/-).
   • Close the battery compartment securely to maintain the waterproof seal. The timer is designed to run for over 6 months on a fresh set of batteries.
2. Pritvirtinkite prie čiaupo:
   • Įsitikinkite, kad jūsų lauko vandens čiaupas yra užsuktas.
   • Thread the timer's inlet connector onto your standard outdoor garden faucet. The 360° swivel inlet allows for easy positioning. Hand-tighten only; do not overtighten.
   • Verify that the metal filter is properly seated in the inlet to prevent debris from entering the timer.
3. Prijunkite žarną:
   • Connect your garden hose to the outlet of the water timer. Hand-tighten to ensure a secure, leak-free connection.
4. Įjunkite vandenį:
   • Slowly turn on your outdoor faucet completely. The timer requires water pressure to operate correctly (0.5 Bar to 8 Bar / 7.25 psi to 116 psi).
   • Patikrinkite, ar jungtyse nėra nuotėkio.

Figure 2: The Insoma Water Timer automates watering, eliminating the need for manual intervention.

3. Operating Modes and Programming

The Insoma Water Timer offers flexible programming options to suit various watering needs.

3.1 Dabartinio laiko nustatymas

Before programming, ensure the current time is set accurately.

1. Press the 'SET OK' button to enter the setting mode.
2. Norėdami reguliuoti valandas ir minutes, naudokite mygtukus „+“ ir „-“.
3. Press 'SET OK' to confirm each setting and move to the next.
4. Press 'ESC MANUAL' to exit the setting mode.

3.2 Automatic Watering (Cycle Mode)

Program your timer for automatic, scheduled watering.

Figure 3: Hour and Day Cycle Modes for automatic watering frequency.

1. Nustatyti pradžios laiką:
   • Press 'SET OK' until 'START TIME' flashes on the display.
   • Use '+' and '-' to set your desired watering start time.
   • Press 'SET OK' to confirm.
2. Laistymo trukmės nustatymas:
   • When 'WATERING DURATION' flashes, use '+' and '-' to set the length of each watering cycle (1 to 360 minutes).
   • Press 'SET OK' to confirm.
3. Laistymo dažnumo nustatymas:
   • When 'WATERING FREQUENCY' flashes, use '+' and '-' to choose how often watering occurs. You can select from every 1 to 23 hours, or every 1 to 15 days.
   • Press 'SET OK' to confirm.
4. Press 'ESC MANUAL' to save settings and exit programming. The timer will now operate according to your schedule.

3.3 Rankinis laistymas

Use manual mode for immediate, unscheduled watering without affecting your programmed schedule.

Figure 4: Manual watering can be activated anytime for flexible use.

1. Press the 'ESC MANUAL' button once. The display will show 'MANUAL'.
2. Use the '+' and '-' buttons to set the desired manual watering duration (1 to 360 minutes).
3. Press 'SET OK' to start manual watering. The timer will run for the set duration and then return to its automatic schedule.
4. To stop manual watering prematurely, press 'ESC MANUAL' again.

3.4 Lietaus uždelsimo režimas

Pause your watering schedule during rainy periods to prevent overwatering and conserve water.

Figure 5: Activate Rain Delay to pause watering for up to 15 days.

1. In normal operating mode, press and hold the '+' button for 3 seconds. The display will show 'DELAY' and a number of days.
2. Use the '+' and '-' buttons to select the desired delay duration (1 to 15 days).
3. Press 'SET OK' to confirm the rain delay. The timer will pause for the selected period and automatically resume its programmed schedule afterward.
4. To cancel rain delay prematurely, press and hold the '+' button again for 3 seconds.

3.5 Užrakto nuo vaikų funkcija

Activate the Child Lock to prevent accidental changes to your watering program.

Figure 6: Child Lock prevents unintended program modifications.

1. To activate Child Lock, press and hold the '-' button for 5 seconds until a lock icon appears on the screen.
2. To deactivate Child Lock, press and hold the '-' button again for 5 seconds until the lock icon disappears.

4. Priežiūra

Proper maintenance ensures the longevity and optimal performance of your water timer.

• Valymas: Periodically clean the metal filter located in the inlet to prevent blockages. Remove the timer from the faucet, take out the filter, rinse it under running water, and reinsert it.
• Baterijos keitimas: Replace batteries when the low battery indicator appears on the LCD screen. Always use new AA 1.5V Alkaline batteries.
• Saugojimas žiemą: Before the first frost, disconnect the water timer from the faucet and hose. Drain any remaining water from the unit. Store the timer indoors in a dry, frost-free location. Remove batteries if storing for extended periods.

5. Problemų sprendimas

Dažniausiai pasitaikančių problemų sprendimus rasite šiame skyriuje.

6. Specifikacijos

• Modelis: SGW01
• Zonos: 1
• Medžiaga: Plastic Inlet and Outlet
• Vandens slėgio diapazonas: 0.5 Bar - 8 Bar (7.25 psi - 116 psi)
• Laistymo trukmė: 1 minute - 360 minutes
• Laistymo dažnis: Kas 1-23 valandų arba kas 1-15 dienas
• Lietaus vėlavimas: 1-15 dienas
• Maitinimo šaltinis: 2 x AA 1.5 V šarminės baterijos (nepridedamos)
• Baterijos veikimo laikas: Approximately 6+ months
• Atsparumo vandeniui įvertinimas: IPX5
• Gaminio matmenys: 4.6 "D x 4.6" P x 2" A
• Prekės svoris: 0.6 svaro

7. Garantija ir palaikymas

Insoma products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Insoma websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.