Svarbi saugos informacija
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Šis šildytuvas skirtas hardwired installation onlyTai nėra įjungiamas įrenginys.
- Šis šildytuvas neapima įmontuoto termostato. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis visų nacionalinių ir vietinių elektros kodeksų.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Sąranka ir diegimas
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Montavimas
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Elektrinis sujungimas
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Naudojimo instrukcijos
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Maitinimas: Įsitikinkite, kad šildytuvą maitinantis grandinės pertraukiklis yra įjungtas (padėtyje „Įjungta“).
- Termostato nustatymas: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Tylus veikimas: This convector heater operates silently, providing consistent warmth without fan noise.
- Pradinis naudojimas: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Priežiūra
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Valymas: Reguliariai valykite šildytuvo išorę minkšta, d šluosteamp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Dulkių šalinimas: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Patikra: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Do Not Obstruct: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Trikčių šalinimas
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šildytuvas neįsijungia. | Nėra maitinimo. Per žemas termostato nustatymas. Faulty wiring or thermostat. | Patikrinkite grandinės pertraukiklį. Padidinkite termostato nustatymą. Kreipkitės į kvalifikuotą elektriką. |
| Šildytuvas gamina nepakankamai šilumos. | Kambario dydis viršija šildymo galią. Užblokuotas oro srautas. Termostato kalibravimo problema. | Ensure heater matches room size (up to 150 sq ft). Pašalinkite kliūtis nuo grotelių. Recalibrate or replace thermostat. |
| Neįprasti kvapai eksploatacijos metu. | Pradinis gamybos likučių deginimas. Dulkių kaupimasis ant kaitinimo elemento. | Ensure ventilation; odor should dissipate. Išvalykite šildytuvą pagal techninės priežiūros skyrių. |
Jei problema išlieka ir išbandžius šiuos sprendimus, susisiekite su „Stelpro“ klientų aptarnavimo tarnyba arba kvalifikuotu elektriku.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | „Stelpro“ |
| Modelio numeris | ASHC1502WCW |
| Vattage | 1500 W (esant 240 V) / 1125 W (esant 208 V) |
| ttage | 240 voltų |
| Amppakilimas | 6.25 Amps |
| Gaminio matmenys (D x P x A) | 3.94 colio x 28.63 colio x 17.56 colio (101 mm x 727 mm x 446 mm) |
| Prekės svoris | 15.7 svaro |
| Šildymo aprėptis | Iki 150 kv. pėdų |
| Ypatingos savybės | Energiškai efektyvus, greitas įkaitimas, tylus |
| Formos faktorius | kabinetas |
| Spalva | Baltas |
| Montavimo tipas | Sieninis laikiklis |
| Kuro tipas | Elektrinis |
| Naudojimas viduje / lauke | Vidinis |
| UPC | 626296203491 |
Garantija
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5 metų ribota garantija ant viso įrenginio.
- Viso gyvenimo garantija ant šildymo elemento.
- 3 metų garantija ant elektroninių komponentų.
Išsaugokite pirkimo įrodymą garantiniams reikalavimams. Visas garantijos sąlygas rasite prie gaminio pridėtoje dokumentacijoje arba apsilankykite oficialioje „Stelpro“ svetainėje. websvetainę.
Palaikymas
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro websvetainė: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.