RAINPOINT 4 zonų purkštuvų laikmačio naudotojo vadovas

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your RAINPOINT 4-Zone Sprinkler Timer. Please read this manual thoroughly before use to ensure proper function and longevity of the device. This timer is designed to automate watering for up to four distinct zones in your garden or lawn.

2. Saugos informacija

• Nemerkite laikmačio į vandenį.
• Ensure all connections are tight to prevent leaks. Use plumber's tape if necessary.
• Install the timer vertically to prevent water from entering the electronics.
• Use only 4 AA alkaline batteries (not included). Do not mix old and new batteries or different battery types.
• Replace batteries when the low power indicator flashes to avoid unexpected valve closure.
• Protect the timer from freezing temperatures by removing it from the faucet and storing it indoors during winter.

3. Produktas baigtasview

The RAINPOINT 4-Zone Sprinkler Timer features a large LCD display, a multi-function dial, and four independent outlets for customized watering schedules.

3.1 pav. Baigtaview of the RAINPOINT 4-Zone Sprinkler Timer with hoses connected to each zone.

3.1 Komponentai

• LCD ekranas: Shows current time, programming settings, and battery status.
• Daugiafunkcis ratukas: Used to navigate between settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF, VIEW).
• Mygtukai: '+', '-', 'OK/MANUAL', 'ZONE', 'DELAY'.
• Vandens įvadas: Connects to your outdoor faucet (3/4'' thread).
• Water Outlets (x4): Connect to garden hoses for individual watering zones.
• Baterijų skyrius: Located on the back, requires 4 AA batteries.

4. Sąranka

4.1 Akumuliatoriaus įdėjimas

1. Raskite baterijų skyrių laikmačio gale.
2. Atidarykite akumuliatoriaus dangtelį.
3. Įdėkite 4 naujas AA šarmines baterijas, užtikrindami teisingą poliškumą (+/-).
4. Close the battery cover securely to maintain its waterproof seal.

4.1 pav.: Baterijų skyrius 4 AA baterijoms.

4.2 Laikmačio montavimas

The timer should be installed vertically to ensure proper operation and prevent water from entering the electronic components. The product is approximately 2.2 pounds, and a metal rod is included for stable mounting.

1. Attach the timer's water inlet to your outdoor faucet. Hand-tighten only.
2. If your faucet is low to the ground, ensure there is enough space below the timer to connect the four output hoses.
3. Use the provided metal rod and screw to secure the timer to a stable surface (e.g., a wooden post or wall) to prevent it from falling due to weight or water pressure.

Figure 4.2: Timer mounted with a metal rod for enhanced stability.

4.3 Žarnų prijungimas

1. Connect your garden hoses to the four individual outlets at the bottom of the timer.
2. Ensure each hose is securely attached to prevent leaks.

5. Naudojimo instrukcijos

5.1 Dabartinio laiko nustatymas

1. Pasukite ratuką į NUSTATYTI LAIKRODĮ.
2. Use the '+' and '-' buttons to adjust the current time (12-hour or 24-hour format).
3. Paspauskite OK/MANUAL patvirtinti.

5.2 Laistymo grafikų programavimas (automatinis režimas)

Each of the four zones can be programmed independently. Only one zone valve can be open at a time. Setting repetitive working times for multiple zones simultaneously may cause issues.

1. Pasukite ratuką į PRADŽIOS LAIKAS. Use '+' and '-' to set the desired start time for watering. Press OK/MANUAL patvirtinti.
2. Pasukite ratuką į KIEK ILGAI. Use '+' and '-' to set the watering duration (from 1 minute to 3 hours 59 minutes). Press OK/MANUAL patvirtinti.
3. Pasukite ratuką į KAIP DAŽNAI. Use '+' and '-' to set the watering frequency (every 1-12 hours, or every 1-7 days). Press OK/MANUAL patvirtinti.
4. Norėdami užprogramuoti kitą zoną, paspauskite ZONA mygtuką ir pakartokite 1–3 veiksmus kitai zonai.
5. Once all desired zones are programmed, turn the dial to ON , kad įjungtumėte automatinį laistymo grafiką.

Figure 5.1: Display showing options for setting watering cycle modes.

5.3 Lietaus uždelsimo funkcija

The rain delay function allows you to pause your watering schedule for a set period to avoid overwatering during rainy weather.

1. Įsitikinkite, kad ratukas nustatytas į ON.
2. Paspauskite ATLAIKYMAS mygtuką.
3. Use the '+' or '-' buttons to select a delay period of 24, 48, or 72 hours.
4. Paspauskite OK/MANUAL , kad patvirtintumėte lietaus atidėjimą. Laikmatis atnaujins savo tvarkaraštį po pasirinkto atidėjimo laikotarpio.

Figure 5.2: Rain delay options displayed on the timer.

5.4 Rankinis laistymas

Manual watering allows you to water immediately without interrupting your programmed schedule.

1. Įsitikinkite, kad ratukas nustatytas į ON.
2. Paspauskite ir palaikykite OK/MANUAL mygtuką.
3. Use the '+' or '-' buttons to set the desired manual watering duration (from 1 minute to 8 hours).
4. Paspauskite ZONA button to select which zone(s) to water manually.
5. Paspauskite OK/MANUAL to start manual watering. The timer will automatically stop after the set duration.

Figure 5.3: Manual watering mode with duration and zone selection.

6. Priežiūra

6.1 Akumuliatoriaus keitimas

When the low power indicator flashes on the display, it is time to replace the batteries. Follow the steps in Section 4.1. Prompt battery replacement prevents the valves from closing unexpectedly and interrupting watering schedules.

6.2 Valymas

Periodically check the water inlet filter for debris. Remove and rinse the filter under running water if it appears clogged. Do not use abrasive cleaners or solvents on the timer.

6.3 Žieminimas

Before the first frost, remove the timer from the faucet. Drain any remaining water from the unit and store it in a dry, frost-free location indoors. Remove batteries if storing for extended periods.

7. Problemų sprendimas

• Nėra vandens srauto:
  • Check if the faucet is turned on.
  • Ensure batteries are installed correctly and have sufficient power.
  • Verify that the watering schedule is correctly programmed and the dial is set to ON.
  • Check the water inlet filter for clogs.
• Vandens nutekėjimas:
  • Ensure all connections (faucet and hose outlets) are hand-tightened.
  • Check the rubber washer in the water inlet. If it is loose, damaged, or missing, adjust or replace it.
  • Apply plumber's tape to threads if leaks persist.
• Incorrect watering times:
  • Verify the current time setting (Section 5.1).
  • Review your programmed watering schedules for each zone (Section 5.2).
  • Ensure only one zone valve is scheduled to open at a time.
• Ekranas neveikia:
  • Pakeiskite baterijas naujomis AA šarminėmis baterijomis.
  • Patikrinkite akumuliatoriaus poliškumą.

8. Specifikacijos

9. Garantija ir palaikymas

RAINPOINT products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official RAINPOINT websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.