Ortis 7-Day Programmable In-Wall Timer Switch

1. Svarbi saugos informacija

ĮSPĖJIMAS: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• Šiam įrenginiui reikalingas Neutralus laidas for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• Įsitikinkite, kad visos laidų jungtys yra tvirtos ir tinkamai izoliuotos.
• Naudoti tik patalpose.

2. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• Vielos veržlės
• Tvirtinimo varžtai
• Vartotojo vadovas

3. Specifikacijos

4. Montavimas

Prieš pradėdami: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltage testeris.

Laidų schema

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

Žingsnis po žingsnio diegimas:

1. Išjungti maitinimą: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. Seno jungiklio pašalinimas: Atsargiai nuimkite esamą sieninę plokštę ir atsukite seną jungiklį nuo elektros dėžutės. Atjunkite laidus nuo seno jungiklio.
3. Identifikuokite laidus: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. Prijunkite laidus: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • Prijunkite JUODAS wire from the timer to the LINIJA (hot) wire from your electrical box.
   • Prijunkite MĖLYNA wire from the timer to the Įkelti wire (to the light/appliance).
   • Prijunkite BALTAS wire from the timer to the NEUTRALUS wire from your electrical box.
5. Jungiklio tvirtinimas: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. Įdiekite sieninę plokštę: Attach your standard wall plate (not included) over the timer switch.
7. Atkurti maitinimą: Įjunkite maitinimą grandinės pertraukikliu.

5. Valdymasview

Vaizdas: Išsamus view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/sumažėjimasasing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• LCD ekranas: Displays current time, day, operating mode, load state, and program information.
• Increase Key: Used to adjust time, program values, or navigate menus upwards.
• Decrease Key: Used to adjust time, program values, or navigate menus downwards.
• Režimo klavišas: Cycles through different operating modes and settings menus.
• Įjungimo / išjungimo mygtukas: Manually turns the connected load ON or OFF, or confirms selections.
• LED indikatorius: Illuminates when the connected load (e.g., light, fan) is ON.

6. Pradinė sąranka

After installation and restoring power, the device will require initial setup.

Setting Current Time and Date:

1. Paspauskite Režimas key until the time setting appears.
2. Naudokite Padidinti ir Sumažėti keys to set the current hour, then press Įjungta/Išjungta patvirtinti.
3. Pakartokite minutėms ir savaitės dienai.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. Paspauskite Režimas key until the latitude/longitude setting appears.
2. Naudokite Padidinti ir Sumažėti keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. Paspauskite Įjungta/Išjungta to confirm. The display will show the calculated sunrise/sunset times for verification.

Vasaros laiko (DST) koregavimas:

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. Veikimo režimai

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 Atsitiktinis režimas

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• To activate Random Mode, press the Režimas key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 Rankinis režimas

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• Paspauskite Įjungta/Išjungta key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. Programavimo tvarkaraščiai

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. Paspauskite Režimas key repeatedly until "P01" (Program 1) appears on the screen.
2. Naudokite Padidinti ir Sumažėti keys to select the desired ON time (hour and minute), then press Įjungta/Išjungta patvirtinti.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press Įjungta/Išjungta patvirtinti.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the Režimas key to advance to the next program number and repeat steps 2-4.
6. Kai visos programos nustatytos, paspauskite Režimas key until the current time display returns, indicating the timer is ready to operate.

Pastaba: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. Platus suderinamumas

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• Lubų ventiliatoriai
• Vonios išmetimo ventiliatoriai
• Fontano siurbliai
• Baseino siurbliai
• Purškikliai

10. Priežiūra

The Ortis timer switch requires minimal maintenance.

• Valymas: Nuvalykite paviršių minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Nėra vartotojo aptarnaujamų dalių: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11. Problemų sprendimas

12. Garantija ir palaikymas

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a 2 metų gamintojo garantija.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis websvetainę.