Treeligo GWT000.04

Treeligo Portable Propane Water Heater (Model GWT000.04) Instruction Manual

Jūsų saugaus ir efektyvaus darbo vadovas.

1. Įvadas

Thank you for choosing the Treeligo Portable Propane Water Heater. This device is designed to provide instant hot water for various outdoor activities such as camping, hiking, and cleaning. It features a compact design, a built-in rechargeable battery, and multiple safety protections to ensure a reliable and convenient experience.

Please read this manual thoroughly before operating the water heater to ensure proper use and to prevent potential hazards.

2. Saugos informacija

Your safety is paramount. Always follow these guidelines:

  • Tik lauke: This water heater is designed for outdoor use in well-ventilated areas. Never operate it indoors or in enclosed spaces due to the risk of carbon monoxide poisoning.
  • Propano sauga: Ensure all gas connections are secure and leak-free before operation. Use only approved propane cylinders and regulators. Store propane cylinders in a well-ventilated area away from ignition sources.
  • Vandens temperatūra: The unit can heat water up to 149°F (65°C). Exercise caution to avoid scalding. Always test water temperature before use, especially for children or individuals with sensitive skin.
  • Vandens šaltinis: Use clean water only. Do not use the pump with flammable liquids or corrosive chemicals.
  • Akumuliatoriaus įkrovimas: Charge the built-in 4500mAh battery using the provided charger. Do not use unapproved chargers. Ensure the battery is fully charged for optimal performance and health.
  • 6-in-1 Safety Protection: The unit includes temperature control, windproof protection, pump running dry protection, tilt protection, overheat protection (automatic shut-off at 185°F/85°C), and circuit protection. Do not attempt to bypass or modify these safety features.
  • Vaikai ir augintiniai: Keep children and pets away from the operating water heater.
  • Saugykla: When not in use, disconnect the propane tank and store the unit in a dry, safe place.
Diagram illustrating the 6-in-1 safety protection features of the Treeligo portable water heater, including IPX7 waterproof rating, overheat protection, circuit protection, and strong pumping capacity.

1 pav. Baigtaview of the 6-in-1 safety protection features.

3. Pakuotės turinys

Įsitikinkite, kad pakuotėje yra visi šie daiktai:

  • 1 x Treeligo Portable Water Heater
  • 1 x Submersible Pump Assembly (6.5 feet hose)
  • 1 x Shower Head Set (5 feet hose)
  • 1 x Water Inlet Connection
  • 1 x Gas Regulator
  • 1 x Charger (4 feet cable)
  • 1 x Vartotojo vadovas
Image showing all components included in the Treeligo portable water heater package: the water heater unit, charger, shower head set, pump assembly, gas regulator, water inlet connection, and user manual.

Figure 2: All included components of the Treeligo Portable Water Heater.

4. Sąrankos instrukcijos

Follow these steps to set up your portable water heater:

  1. Įrenginio padėtis: Place the water heater on a stable, level surface in a well-ventilated outdoor area.
  2. Prijunkite vandens įleidimo angą: Screw the blue water inlet connection securely into the designated port on the unit.
  3. Prijunkite siurblį: Plug the black power cable of the pump into the 'WATER PUMP INTERFACE' port. Connect the pump water hose to the water inlet connection.
  4. Panardinamas siurblys: Place the submersible pump fully into a clean water source (e.g., a bucket or container). Ensure the pump is completely submerged before operation.
  5. Prijunkite dušo žarną: Connect the shower hose to the red outlet port on the unit.
  6. Prijunkite dujų reguliatorių: Attach the gas regulator to your propane cylinder, then connect the other end of the regulator to the gas inlet at the back of the water heater. Ensure all gas connections are tight.
  7. Power On Main Switch: Locate the small black main power switch on the bottom of the machine and turn it to the 'ON' position.
  8. Power On Display Panel: Tap the power button on the display panel to turn on the unit. Check the battery level on the display. If the battery is low, connect the charger to the 'CHARGING INTERFACE' port on the front of the unit.
Eight-step visual guide for setting up the Treeligo portable water heater, showing connections for water inlet, pump, shower hose, gas regulator, and power switches.

Figure 3: Step-by-step visual guide for initial setup.

Video 1: Official Treeligo guide on how to set up and use the outdoor camping water heater.

5. Naudojimo instrukcijos

Once set up, operate your water heater as follows:

5.1 Valdymo skydas baigtasview

Detailed diagram of the Treeligo water heater's intelligent real-time display, showing indicators for battery level, inlet water temperature, water flow status, pump status, output water temperature, battery voltage, burner status, burner switch, pump switch, ON/OFF switch, and water temperature control knob.

Figure 4: Intelligent Real-Time Display and Control Panel.

  • Baterijos lygis: Rodo likusį akumuliatoriaus įkrovą.
  • Įleidžiamo vandens temperatūra: Displays the temperature of the incoming water.
  • Water Flow Status: Shows if water is flowing.
  • Siurblio būsena: Indicates if the pump is active.
  • ĮJUNGIMO/IŠJUNGIMO jungiklis: Main power button for the display panel.
  • Output Water Temperature: Displays the temperature of the heated water.
  • Baterijos tūristage: Rodo dabartinį akumuliatoriaus įkrovos lygįtage.
  • Burner Status: Indicates if the burner is active.
  • Burner Switch: Activates or deactivates the propane burner.
  • Pump Switch: Activates or deactivates the water pump.
  • Vandens temperatūros valdymo rankenėlė: Adjusts the desired output water temperature (Low to High).

5.2 Vandens šildytuvo paleidimas

  1. Ensure all setup steps are completed and connections are secure.
  2. Turn on the main power switch on the bottom of the unit.
  3. Press the ON/OFF switch on the display panel. The unit will automatically enter shower mode, and the showerhead icon will light up.
  4. Paspauskite Siurblys įjungtas/išjungtas button to start the water pump. Water will begin to flow.
  5. Sureguliuokite Water Temperature Control Knob to your desired temperature. The burner will ignite automatically to heat the water.
  6. The display will show the inlet and output water temperatures in real-time.

5.3 Adjusting Water Flow Modes

The shower head offers three adjustable water flow modes:

  • Jet Stream: A concentrated, powerful stream.
  • Standartinis režimas: A balanced, everyday shower stream.
  • Rainfall Mode: Švelnus, platus purškimas.

Rotate the shower head nozzle to switch between these modes.

Image showing a shower head with three adjustable water flow modes: Jet Stream, Standard Mode, and Rainfall Mode, with arrows indicating how to switch between them.

Figure 5: Three adjustable water flow modes on the shower head.

5.4 Akumuliatoriaus veikimas ir įkrovimas

The built-in 4500mAh battery provides up to 100 minutes of continuous use on a full charge. It charges to 80% in 90 minutes and 100% in 3 hours. The unit supports charging while in use. For optimal battery health, always charge to 100% when possible.

6. Priežiūra

Regular maintenance ensures the longevity and safe operation of your Treeligo Portable Water Heater:

  • Valymas: After each use, drain any remaining water from the unit and hoses. Wipe down the exterior with a damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
  • Saugykla: Store the unit in a dry, protected area when not in use. Disconnect the propane tank and ensure all hoses are properly coiled.
  • Akumuliatoriaus priežiūra: If storing for extended periods, charge the battery to approximately 50-70% and recharge every 3-6 months to prevent deep discharge.
  • Patikrinkite jungtis: Periodically check all water and gas connections for wear, damage, or leaks. Replace any damaged components immediately.
  • Žieminimas: In freezing temperatures, ensure all water is completely drained from the unit and hoses to prevent damage from ice expansion.

7. Problemų sprendimas

Jei kyla problemų, žr. toliau pateiktas dažniausiai pasitaikančias problemas ir sprendimus:

Q1: My water pump isn't working at all and isn't pumping any water. What should I do?

A:

  1. Power Switch Location: The small black switch on the bottom of the machine is the main power switch for the entire device. Ensure it is turned ON.
  2. Patikrinkite akumuliatoriaus lygį: If the indicator light or screen on the control panel does not light up after pressing the power button, the built-in battery is low. Connect the power adapter to charge it first.
  3. Įkrovimo pastaba: When the device is out of power, neither the water pump nor the heating function will start. This is the most common reason why the device does not work.
Image showing the location of the main power switch on the bottom of the Treeligo water heater and the display panel, illustrating troubleshooting steps for a non-working pump.

Figure 6: Main power switch and display panel for troubleshooting pump issues.

Q2: I can't tell which port is for charging and which is for power output. What should I do?

A: Refer to the image below for the correct wiring method.

  1. Plug the water pump's power cord into the port labeled "WATER PUMP INTERFACE."
  2. Connect the water inlet hose to the threaded fitting labeled "Water Inlet" at the bottom.

Svarbi pastaba: Never plug the pump's power cord into the charging port. The charging port is only for charging the device; the pump will not work at all if plugged in there.

Image illustrating the correct connection points on the Treeligo water heater for the water pump interface and water inlet, distinguishing them from the charging port.

Figure 7: Correct port identification for pump and charging.

Q3: I just received the unit, and the pump isn't working when I use it for the first time. Is this normal?

A: Ensure correct connections as follows:

  1. Plug the power adapter into the 'CHARGING INTERFACE' port on the device to charge.
  2. The red port labeled "Water output" or "Water pump port" is the power supply port for the water pump; do not plug a charger into it.

Svarbi pastaba:

  • To charge the device: Plug into the 'CHARGING INTERFACE' on the front.
  • To run the water pump: Plug into the 'WATER PUMP INTERFACE' on the side.
  • To connect water hoses: Connect the hose to the 'Water output' (out) on the front and the 'Water inlet' (in) on the side.
Image showing the correct ports for charging and water pump connection on the Treeligo water heater, clarifying common first-time use issues.

Figure 8: Correct port usage for charging and pump operation.

Q4: The equipment is powered on and the wiring is correct, but the pump still won't start. What could be the problem?

A:

  1. Piktogramos legenda: When the showerhead icon is lit on the display, it indicates that the device is in "Shower Mode." Pressing the Siurblys įjungtas/išjungtas button at this time will activate the pump to supply water.
  2. How to turn on shower mode: First, press the power button on the far left to turn on the device. It will automatically enter shower mode, and the showerhead icon will light up. Then press the Siurblys įjungtas/išjungtas button to start the pump, and you can take a shower as usual.
  3. Additional tip: If the icon isn't lit, the pump won't start. You can check to see if the mode is set correctly or if the device is plugged in.
Image highlighting the showerhead icon on the Treeligo water heater's display panel, explaining its significance for activating the pump in shower mode.

Figure 9: Shower mode icon on the display panel.

8. Specifikacijos

FunkcijaSpecifikacija
Modelio pavadinimasGWT000.04
Prekės matmenys (IxPxH)17.32 x 6.69 x 15.35 colio
Prekės svoris19.2 svaro
MedžiagaMetalas
SpalvaJuoda
Baterijos talpa4500 mAh
Max Heating Output40,900 XNUMX BTU
Maksimali vandens temperatūraIki 149 °F (65 °C)
Continuous Use Time (Battery)Iki 100 minučių
Įkrovimo laikas3 hours (80% in 90 minutes)
Saugos ypatybėsTemperature control, Windproof, Pump dry-run protection, Tilt protection, Overheat protection (185°F/85°C auto shut-off), Circuit protection
Kilmės šalisKinija

9. Garantija ir palaikymas

Treeligo products are manufactured to high-quality standards. For warranty information, please refer to the specific warranty card included with your product or contact Treeligo customer support.

For technical assistance, troubleshooting, or to inquire about replacement parts, please visit the official Treeligo store or contact their customer service department. Keep your purchase receipt and model number (GWT000.04) handy when contacting support.

Treeligo Store: Visit the Treeligo Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.