1. Įvadas
The Phanteks XT View Matrix is a high-performance mid-tower gaming case designed for enthusiasts. It features an immersive 600 LED Matrix screen, dual tempered glass panels, and optimized airflow for superior cooling. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case.

Image 1.1: The Phanteks XT View Matrix Mid-Tower Gaming Case, showcasing its white exterior and vibrant RGB fans visible through the tempered glass panels.
2. Saugos informacija
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the product.
- Prieš atlikdami bet kokius montavimo ar priežiūros darbus, visada atjunkite maitinimo šaltinį nuo sieninio lizdo.
- Avoid exposing the case to moisture or extreme temperatures.
- Atsargiai elkitės su grūdinto stiklo plokštėmis, kad nesudužtų.
- Keep small components and tools away from children.
- Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektros pavojaus.
3. Diegimo vadovas
This section outlines the steps for installing your PC components into the Phanteks XT View Matrix case.
3.1. Bylos rengimas
Remove the side panels by unscrewing the thumbscrews at the rear of the case and gently sliding the panels off. For tempered glass panels, exercise caution.

3.1 pav.: Vidinis view of the case, highlighting various mounting points for components such as fans, storage drives, and cable management routes.
3.2. Pagrindinės plokštės montavimas
- Įstatykite įvesties/išvesties skydą į galinę korpuso angą.
- Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's screw holes.
- Pritvirtinkite pagrindinę plokštę pridėtais varžtais.
3.3. Maitinimo šaltinio (PSU) įrengimas
- Korpuso apačioje, gale, raskite maitinimo bloko tvirtinimo vietą.
- Įstumkite maitinimo bloką į jam skirtą skyrių.
- Pritvirtinkite maitinimo bloką varžtais iš korpuso galo.

Image 3.2: Rear internal view of the case, illustrating the power supply unit (PSU) mounting area and various drive bays.
3.4. Atminties disko diegimas
The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting locations.
- 2.5 colio SSD diskai: Mount SSDs to the dedicated 2.5" brackets, typically located behind the motherboard tray.
- 3.5 colio kietieji diskai: Install HDDs into the drive cages, usually found beneath the PSU shroud.
3.5. Išplėtimo plokštės (GPU) diegimas
- Nuimkite reikiamus išplėtimo lizdų dangtelius nuo korpuso galo.
- Įdėkite vaizdo plokštę arba kitas išplėtimo korteles į atitinkamus pagrindinės plokštės PCIe lizdus.
- Pritvirtinkite kortelę varžtais.

3.3 pav.: Vidinis view of the case with a graphics card, CPU cooler, and fans already installed, demonstrating component compatibility and layout.
3.6. Ventiliatoriaus ir radiatoriaus montavimas
The XT View Matrix supports up to 9 x 120mm fan positions and full 360mm radiator support at the top. The case includes 3 M25-120 D-RGB fans.
- Mount additional fans or radiators to the designated areas using the provided screws.
- Connect fan and RGB cables to your motherboard or a compatible controller.
3.7. Kabelių valdymas
Norėdami sutvarkyti laidus, naudokite kabelių nukreipimo kanalus ir tvirtinimo taškus už pagrindinės plokštės dėklo. Tai pagerina oro srautą ir suteikia estetinį vaizdą.
4. Naudojimo instrukcijos
4.1. Įjungimas
Įdiegę visus komponentus ir prijungę laidus, paspauskite maitinimo mygtuką, esantį priekiniame įvesties / išvesties skydelyje, kad paleistumėte sistemą.
4.2. Priekiniai įvesties / išvesties prievadai
Priekinis įvesties / išvesties skydelis suteikia patogią prieigą prie:
- 1x USB-C 3.2 Gen2 port
- 1x USB 3.0 prievadas
- Maitinimo ir Reset mygtukai
- Lighting control buttons (no software needed for basic control)
- Mic/Headphone jacks
4.3. 600 LED Matrix Display Control
The integrated 600 LED Matrix screen can display dynamic system statistics, animations, and custom visuals. To fully customize the display, download and install the Phanteks Nexlinq app.

Image 4.1: The 600 LED Matrix screen displaying dynamic content, with an overlay of the Phanteks Nexlinq app interface for customization.

Image 4.2: Various examples of information and patterns that can be displayed on the 600 LED Matrix screen, including system stats and custom graphics.
5. Priežiūra
Reguliarus techninis aptarnavimas padeda užtikrinti optimalų kompiuterio komponentų veikimą ir ilgaamžiškumą.
5.1. Valymas
- Dulkių filtrai: Periodically remove and clean the dust filters (if applicable) to maintain good airflow.
- Interjeras: Use compressed air to remove dust from inside the case, especially from fans and heatsinks.
- Išorė: Išorinius paviršius nuvalykite minkšta, damp audinys. Venkite abrazyvinių valiklių.
5.2. Ventiliatoriaus priežiūra
Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it.
6. Problemų sprendimas
Jei kyla problemų dėl kompiuterio surinkimo, atlikite šiuos įprastus trikčių šalinimo veiksmus:
- Nėra galios: Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch cable.
- Ventiliatoriai nesisuka / nėra RGB: Verify fan and RGB cables are correctly connected to the motherboard or controller. Check software settings for RGB control.
- LED Matrix Display Issues: Ensure the display cable is securely connected. If using the Nexlinq app, check for software updates or reinstall the application.
- Perkaitimas: Ensure all fans are installed correctly and spinning. Check for dust buildup and clean filters. Verify proper thermal paste application on CPU.
7. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | Phanteks |
| Modelio pavadinimas | XT View Matrica |
| Atvejo tipas | Mid Tower |
| Spalva | Pilka, balta |
| Medžiaga | Steel alloy, Polyester fabric, ABS, Tempered glass window |
| Gaminio matmenys (D x P x A) | 44P x 23l x 50H cm (approximately 17.3 x 9.1 x 19.7 inches) |
| Prekės svoris | 17.5 svaro (maždaug 7.9 kg) |
| Aušinimo būdas | Vanduo, oras |
| Įtraukti gerbėjai | 3x M25-120 D-RGB fans |
| LED ekranas | 600 LED Matrix Screen |
| Priekinė I/O | 1x USB-C 3.2 Gen2, 1x USB 3.0, Power/Reset, Lighting Control, Mic/Headphone |
| Internal Bays Quantity | 7 (various 2.5" and 3.5" bays) |
| Suderinami įrenginiai | Desktop, Gaming PC |
| Gamintojo dalies numeris | PH-XT523VM1_DWT01 |
| Pasaulinis prekybos identifikavimo numeris (GTIN) | 00886523304098 |
8. Garantija ir palaikymas
For warranty information and technical support, please refer to the official Phanteks websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
„Phanteks“ oficialus Websvetainė: www.phanteks.com