CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Svarbios saugos instrukcijos

Prieš naudodami šį prietaisą, perskaitykite ir supraskite visas saugos instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.

• Always connect the unit to a grounded outlet.
• Nemerkite pagrindinio įrenginio į vandenį ar kitus skysčius.
• Nenaudokite valiklio be skysčio bakelyje.
• Laikyti vaikams nepasiekiamoje vietoje.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive liquids.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. Produktas baigtasview

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

Pagrindinės savybės

• 10L talpa: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• Šlavimo funkcija: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• Degas Mode: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• Reguliuojama galia: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• Reguliuojamas laikmatis: 0-30 minute timer for precise control over cleaning cycles.
• Temperatūros valdymas: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• 304 nerūdijančio plieno konstrukcija: Durable and corrosion-resistant tank and housing.
• Integrated Drain Port: For convenient and mess-free fluid drainage.

Pakuotės turinys

Išpakuodami patikrinkite, ar visi daiktai yra ir yra geros būklės.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 x maitinimo laidas
• 1 x Mesh Basket
• 1 x išleidimo žarna
• 1 x naudojimo instrukcija

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

Paveikslėlis: Viršview of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. Sąranka

1. Išpakavimas: Atsargiai išimkite ultragarsinį valytuvą ir visus priedus iš pakuotės. Išsaugokite pakuotę būsimam saugojimui ar transportavimui.
2. Vieta: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. Maitinimo jungtis: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. Užpildykite baką: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Įdėti krepšelį: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. Operacija

Familiarize yourself with the control panel before beginning operation.

Valdymo skydas baigtasview

Paveikslėlis: detalus view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• Maitinimo jungiklis: Įjungia/išjungia įrenginį.
• Laikmačio valdymas: Adjusts the cleaning duration from 0 to 30 minutes.
• Temperatūros valdymas: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

Valymo procedūra

1. Paruoškite daiktus: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. Pridėti sprendimą: Fill the tank with the appropriate cleaning solution.
3. Nustatyta temperatūra (neprivaloma): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. Pradėkite valymą: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. Stebėti pažangą: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. Baigti valymą: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. Nuplaukite ir išdžiovinkite: Rinse the cleaned items thoroughly with clean water and dry them completely.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. Priežiūra

Tinkama priežiūra užtikrina ultragarsinio valytuvo ilgaamžiškumą ir optimalų veikimą.

• Bako ištuštinimas: After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• Bako valymas: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp Nenaudokite abrazyvinių valiklių ir nemerkite įrenginio į vandenį.
• Lid and Basket: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• Saugykla: Nenaudojamą prietaisą laikykite vėsioje, sausoje vietoje. Įsitikinkite, kad bakas tuščias ir sausas.
• Reguliarus patikrinimas: Reguliariai tikrinkite maitinimo laidą, ar nėra pažeidimų. Jei pažeistas, nebenaudokite ir susisiekite su klientų aptarnavimo tarnyba.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. Problemų sprendimas

Dažniausiai pasitaikančias problemas ir jų sprendimus rasite šiame skyriuje. Jei problema išlieka, susisiekite su klientų aptarnavimo tarnyba.

7. Specifikacijos

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: CREWORKS Store on Amazon