Ortis Above Ground Smart Pool Timer

1. Įvadas

Thank you for choosing the Ortis Above Ground Smart Pool Timer. This device is designed to automate the operation of your pool pump and salt system, enhancing energy efficiency and simplifying your pool maintenance routine. Featuring dual waterproof outlets, a clear LCD display, and flexible timing functions, this timer is built for reliable outdoor performance. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.

2. Saugos informacija

• Elektros sauga: Always ensure the timer is connected to a properly grounded outlet. Do not immerse the timer in water.
• Didžiausia apkrova: The total current for all connected appliances must not exceed 15 Amperes (15A). Overloading can cause damage to the timer and connected devices, and poses a fire hazard.
• Naudojimas lauke: This timer is designed for outdoor use and features waterproof outlets. However, ensure all connections are secure and protected from direct water spray.
• Atjungimas: Disconnect power before performing any maintenance or when the timer is not in use for extended periods.
• Vaikai: Saugoti nuo vaikų. Tai nėra žaislas.
• Žala: Do not operate the timer if the cord, plug, or housing is damaged. Contact customer support for assistance.

3. Pakuotės turinys

Patikrinkite pakuotę, ar joje yra šie daiktai:

• Ortis Above Ground Smart Pool Timer (Model KJ-139)
• Instrukcijų vadovas

4. Produktas baigtasview

Familiarize yourself with the components of your Ortis Smart Pool Timer.

4.1 paveikslas: Priekyje view of the Ortis Smart Pool Timer, showing the LCD display, control buttons, and dual outlets (S1 and S2).

4.1. Komponentai

• LCD ekranas: Shows current time, mode, and operational status.
• (M) Mode Button: Cycles through different operating modes (Countdown, 24H Auto Cycle).
• (T) Time Button: Naudojamas esamam laikui nustatyti.
• (^) Up Button: Adjusts values upwards.
• (V) Down Button: Adjusts values downwards.
• Užrakinimo mygtukas: Locks/unlocks the display to prevent accidental changes.
• (Manual) Button: Manually turns outlets S1/S2 ON or OFF.
• (Time ON) Button: Used in 24H Auto Cycle mode to set ON times.
• (Įjungimo mygtukas: Turns the timer unit ON/OFF.
• S1 & S2 Outlets: Dual waterproof outlets for connecting appliances.
• Maitinimo laidas: Connects the timer to a wall outlet.

4.2 paveikslas: Išsamus view of the LCD screen, showing time, mode, and status indicators.

4.3 paveikslas: View of the waterproof outlet covers, designed for outdoor protection.

5. Sąranka

5.1. Laikmačio montavimas

1. Choose a suitable location near your pool or water feature, ensuring it is within reach of a grounded outdoor power outlet and your appliances.
2. Mount the timer securely to a wall or sturdy post using appropriate screws (not included). Ensure it is at a height that allows for easy access to the display and buttons, and that the outlets face downwards to prevent water ingress.

5.1 paveikslas: The timer mounted on a wall, positioned for convenient access near a pool.

5.2. Prisijungimas prie maitinimo

1. Plug the timer's power cord into a grounded 120V AC outdoor electrical outlet.
2. The LCD display should illuminate. If not, press the Power button.

5.3. Buitinių prietaisų prijungimas

1. Open the waterproof covers for outlets S1 and S2.
2. Plug your pool pump into one outlet (e.g., S1) and your salt system or other appliance into the other outlet (e.g., S2).
3. Ensure the total current draw of all connected appliances does not exceed 15A.
4. Close the waterproof covers securely around the appliance plugs to maintain weather resistance.

5.2 paveikslas: The timer with a pool pump and salt chlorinator connected to its dual outlets.

6. Naudojimo instrukcijos

6.1. Dabartinio laiko nustatymas

1. Paspauskite ir palaikykite (T) Time mygtuką, kol pradės mirksėti valandų skaitmenys.
2. Naudokite (^) Up ir (V) Down buttons to adjust the hour. Pay attention to AM/PM.
3. Paspauskite (T) Time button again to move to minute adjustment. Use (^) Up ir (V) Down nustatyti minutes.
4. Paspauskite (T) Time button one more time to confirm and exit time setting.

6.2. Atgalinės atskaitos režimas

This mode allows you to set a specific duration for the connected appliances to run before automatically turning off.

1. Paspauskite (M) režimas button until "COUNTDOWN CYCLE MODE" appears on the display.
2. The hour digits for the countdown will flash. Use the (^) Up ir (V) Down buttons to set the desired running hours.
3. Paspauskite (M) režimas button again to move to minute adjustment. Use (^) Up ir (V) Down to set the desired running minutes.
4. Paspauskite (M) režimas button once more to confirm the countdown duration.
5. The timer will now display the countdown. The connected appliances will turn ON and run for the set duration, then turn OFF automatically.

6.3. 24H Auto Cycle Mode

This mode allows you to program daily ON/OFF schedules for your appliances.

1. Paspauskite (M) režimas button until "24H AUTO CYCLE MODE" appears on the display.
2. Paspauskite (Time ON) button to enter program setting. The display will show "1 ON".
3. Naudokite (^) Up ir (V) Down mygtukais nustatykite norimą įjungimo laiką (valandą ir minutę). Paspauskite (Time ON) , kad perjungtumėte valandą ir minutę.
4. After setting the ON time, press (Time ON) dar kartą. Ekrane bus rodoma „1 OFF“.
5. Naudokite (^) Up ir (V) Down buttons to set the desired OFF time (hour and minute). Press (Time ON) , kad perjungtumėte valandą ir minutę.
6. You can set multiple ON/OFF programs (e.g., 2 ON, 2 OFF, etc.) by repeating steps 3-5. The timer supports multiple programs.
7. Kai visos programos nustatytos, paspauskite (M) režimas button to exit program setting and activate the 24H Auto Cycle mode. The timer will now follow your programmed schedule daily.

6.4. Rankinis nepaisymas

To manually turn the connected appliances ON or OFF, regardless of the programmed schedule:

• Paspauskite (Rankinis) button. Each press will cycle through ON, OFF, and AUTO modes for the outlets.
• In AUTO mode, the timer will follow the programmed schedule.

6.5. Užrakinimo funkcija

Kad išvengtumėte atsitiktinių nustatymų pakeitimų:

• Paspauskite ir palaikykite Užraktas button for approximately 3 seconds to lock the keypad. A lock icon will appear on the display.
• Repeat the action to unlock the keypad. The lock icon will disappear.

7. Priežiūra

• Valymas: Disconnect the timer from power before cleaning. Wipe the exterior with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Patikra: Regularly inspect the power cord, plug, and outlets for any signs of damage or wear. Ensure waterproof covers are intact and properly sealed.
• Saugykla: If storing the timer for an extended period, disconnect it from power, clean it, and store it in a dry, cool place away from direct sunlight.

8. Problemų sprendimas

9. Specifikacijos

• Modelis: KJ-139
• Įvesties tomastage: 120V AC 60Hz
• Maksimali apkrova: 15A / 1800W
• Išparduotuvės: 2 įžeminti lizdai
• Veikimo režimai: Countdown, 24H Auto Cycle, Manual
• Ekranas: LCD
• Matmenys (A x P x G): Maždaug 4.9 colio x 3.3 colio x 3.9 colio
• Maitinimo laido ilgis: Approximately 4.7 ft
• Aplinkosaugos įvertinimas: Outdoor Rated, Waterproof Outlets

9.1 paveikslas: Product dimensions of the Ortis Smart Pool Timer.

10. Garantija ir palaikymas

10.1. Informacija apie garantiją

Ortis products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, improper installation, unauthorized repairs, or natural disasters.

10.2. Pagalba klientams

If you have any questions, require assistance with setup, or encounter any issues not covered in this manual, please contact Ortis customer support. Refer to the product packaging or the Ortis brand store on Amazon for contact details.