MODOFO Electric Pruning Shears
Instrukcijos
If you have question or concern, contact us directly from your order or store.
Įspėjimas
- Read safety warnings and instructions, Failure to heed warnings and follow instructions may lead to an electric shock, a fire and/or serious injury.
- Išsaugokite visus įspėjimus ir instrukcijas, kad galėtumėte pasinaudoti ateityje.
Pastaba
- Prašome atidžiai perskaityti vadovą.
- Bateriją galima įkrauti tik patalpose.
- Dviguba izoliacija, įžeminimas nereikalingas.
- Never empty the battery when not in use. It is recommended to charge the battery once a month to prolong the battery life.
- Akumuliatoriaus įkrovimas automatiškai nutrūks, kai įvyks perkaitimas.
- The battery should not be charged for more than 6 hours
APLINKOS APSAUGA
Laikykitės visų konkrečiai šaliai taikomų atliekų šalinimo taisyklių ir taisyklių.- Electric appliances must not be disposed of as household waste. Recycle the device, accessories and packaging
It is forbidden to discared scrapped machinery and equipment at will.
Atsargumo priemonės naudojant
- Before starting the working day, make sure the battery is sufficiently charged. Always disconnect the pruning shears from the power cord for all operations other than trimming. MOST IMPORTANTLY, REMEMBER TO DO SO WHEN SHARPENING OR LUBRICATING.
- Check that the blade is correctly tightened every morning.
Operation and characteristic
- Activate the machine:Press the red button at bottom of pruner for about 1 second
- Product activation: when the powers on, continuously pull the trigger key twice to open the blade.
- Cutter head close: In the power on state: hold the trigger key until you hear four beep-sound, movable blade will close.
- Change the width of the cutter head opening and closing: in the power on state, long-press the trigger key until you hear beep sound, change the width of the cutter head opening and closing.
- Shut down the machine: press the red button on top of pruner for about 2 seconds and successfully shut down after hearing a beep sound.
Failure Tips
| Skambučio garso dažnio laikai | Nesėkmė | Sprendimas Metodas |
| 1 | Akumuliatoriaus talpos gedimas | Patikrinkite, ar akumuliatoriaus talpa maža |
| 2 | Ryšio nesėkmė | Patikrinkite, ar kiekviena kabelio jungties dalis yra laisva |
| 3 | Ašmenų gedimas | No oil on blade |
| 4 | Variklio fazinės linijos trumpasis jungimas | Check if cable or head of the connector
has shortcircuit caused |
Krautis daiktus
- Paspauskite gaiduką ir palaikykite kelias sekundes, tada atleiskite, ašmenys užsidarys ir neatsidarys.
- Disconnect the power cord from battery.
- Sutvarkykite, išvalykite ir supakuokite genėjimą į įrankių dėžę.
Akumuliatoriaus įkrovimas
- It is recommended to charge new battery before the first use of the electric pruner. Plug the battery charger output into the battery charging jack then plug the charger into a power socket. The LED indicator on the battery will turn RED during charging and turn GREEN when the battery is fully charged.
- The battery takes about 5-6 hours to attain full charge. A fully charged battery can sustain 8-10 hours of continuous pruning operation.
Įspėjimai
- Įkrovimo metu normalu, kad įkroviklis ir akumuliatorius yra šilti.
- lf the battery is not use for a long period of time, it recommended to charge the battery once every 3 months, this is to ensure the battery life is not affected by low usage.
- Naujam arba ilgą laiką nenaudojamam akumuliatoriui reikės maždaug 5 įkrovimo ir iškrovimo ciklų, kad būtų pasiekta visa talpa.
- Neįkraukite visiškai įkrauto akumuliatoriaus tik po kelių minučių naudojimo, tai sumažins akumuliatoriaus tarnavimo laiką ir efektyvumą.
- Nenaudokite pažeistos baterijos ir išardykite įkroviklį arba akumuliatorių.
- Nestatykite akumuliatoriaus šalia aukštos temperatūros šilumos šaltinio, nes jis sprogs gaisro metu arba ilgai veikiamas aukštos temperatūros šilumos šaltinio.
- Nekraukite akumuliatoriaus lauke arba drėgnoje aplinkoje.
- lt is normal for the pruning shear to reduce cutting diameter when the battery capacity is getting low.
- Įkrovimo metu nenaudokite genėjimo žirklių. Įkrovimo metu jis turi būti atjungtas nuo akumuliatoriaus.
- Nelaikykite akumuliatoriaus drėgnoje aplinkoje.
Tepimas
- For all these operations you must disconnect the pruning shears. Lubricate at least twice per day (early morning and early afternoon).
- For correct lubrication the pruning shear blade must be unlocked.
Norėdami tai padaryti:
- There is a oil filling port at the reverse of the pruner
- Place the oil bottle nozzle in the lubricating port. Hold the oil bottle up-right and then lubricate.
- Operate the pruner, make the lubrication is well-proportioned.
Ašmenų priveržimas
- Atlikdami visas šias operacijas, turite atjungti genėjimo žirkles.
- Check the blade tightening every morning. A well tightened blade should not move from left to right.If the blade is correctly tightened you should be able to close the pruning shears manually (without forcing).
Norėdami sureguliuoti sandarumą:
- Using toolkit to unlock the screw and remove it.
- Use internal hexagonal wrench provided and adjust the nut tension until the tool clicks.
- Užfiksuokite varžtą ir patikrinkite sandarumą naudodami aukščiau aprašytą procedūrą.
Operations and Maintenance for Battery
- Do not charge battery with ambient temperature below 32°F(0°C)or above 139°F(45 °C).
- Prieš prijungdami maitinimo laidą prie akumuliatoriaus, įsitikinkite, kad akumuliatorius yra išjungtas.
- Only use battery charger as supplied together with the pruning shear, the use of any other charger not matching to the charging specification of the battery may cause fire.
- ltems such as paper clips, coins, keys, nails, screws, or any other conductive items must be keep away from battery when not in use.
- Neardykite akumuliatoriaus
- Nejunkite akumuliatoriaus trumpojo jungimo.
- Nenaudokite akumuliatoriaus šalia šilumos šaltinio.
- Nedėkite akumuliatoriaus į ugnį ar vandenį.
- Nekraukite akumuliatoriaus šalia ugnies arba tiesioginiuose saulės spinduliuose
- Nekiškite į bateriją vinių, nekalkite baterijos, nedaužykite akumuliatoriaus, nemeskite baterijos ar kitokio smūgio į akumuliatorių.
- Nenaudokite pažeisto ar deformuoto akumuliatoriaus.
- Neatlikite akumuliatoriaus litavimo ar virinimo.
- Nekeiskite akumuliatoriaus įkrovimo krypties, jungčių poliškumo ar per didelio akumuliatoriaus išsikrovimo.
- Do not connect the battery to charging outlets or car cigarette lighter
- Do not use the battery on equipment other than the designated pruner
- Nelieskite tiesioginio akumuliatoriaus ličio elementų.
- Do not place the battery in microwave, high temperature or high pressured vessel.
- Do not use the battery that is leaking.
- Keep the battery out of CHILDR
- Do not use or place the battery under direct sunlight (or in vehicle that are under direct sunlight)that will cause the battery to overheat or burn shortening the battery lifespan.
- Do not use the battery in electrostatic environment (above 64V)
- Do not use battery that is corroded,with unpleasant odor or unusual appearance.
- lf the skin or clothing comes into direct contact with battery fluid,wash with clear water immediately.
- Laikykite akumuliatorių visiškai įkrautą, kai genėjimo žirklės nenaudojamos ilgą laiką.
Saugos pastabos
ĮSPĖJIMAS!
Please read all instructions carefully,not complying with instruction may lead to electric shocks,fire or other ser- ious damage!
Darbo zonos sauga
- Keep work area clean and bright,messy and dimmed workplace may cause accidents.
- Do not use the pruner in explosive,inflammable or humid environment.
- Keep CHILDREN and by stander away before operating the pruner to avoid accidental injury due to distraction.
Darbo zonos sauga
- Pruning shear battery socket must be compatible with the power cable plug, do not modify the socket and plug.
- Do not exposed the pruning shear to rain,humid environment,water on any other moisture that will risk electrical shock.
- Do not misuse the power cord.Do not lift or pull the pruning shear by the power cord. Keep the pruning shears away from heat oil,sharp edges or moving parts.
Žmonių saugumas
- Keep alert while using the pruning shear.Do not operate the pruning shear when you are tired or under the influence of drugs or alcohol.
- Use protective devices,always wear safety goggles as well as other safety tools such as dust mask,anti-slide boots,helmet and hearing protective devices that will reduce the risk of injury.
- Before powering ON the pruning shear, ensure all adjusting tools and spanners are removed. Tools left on the rotating parts of pruning shear may result injury.
- Do not over stretch hands when operating the pruning shear, keep both hands away from cutting area. Do not under any circumstances place the hands beneath the branches, at the same ensure the surface and under-side of the branches do not have any material that can be damage by cutting edges. Always maintain balance and in control of pruning shear in any situation.
- Dress appropriately, do not wear loose clothing or jewelry. Keep hair, clothing and sleeves away from the pruning shear. Loose clothing.
Irregularity Measures
- In the event the pruning shear is not able to cut through an object, released the trigger immediately and the moving blade will return to its open position automatically.
- ln the event the pruning shear is cutting through a branch of particularly hardness, released the trigger immediately and the moving blade will return to its open position automatically.
- ln the event the battery is not charging properly, please check if the charger is the one provided with the package during purchase. Next is to ensure the supply voltage to the charger is same rating as the specification of the charger
- ln the event of electric or mechanical malfunction, power OFF immediately.
- Operating not following instructions in this manual may result battery fluid leakage, do not contact the leaked battery fluid. In the event of accidental contact with battery fluid, clean with clear water immediately. If the battery fluid keeps in contact with the eyes, wash with clear water and must seek hospital assistance. Fluid from leaked battery may caused irritations or burns.
Atsisakymas
Our company Limited reserves the right to make any design and manufacturing changes deemed necessary to improve on the performance.Thank you your under standing.If there are differences between the physical tool and the graphics as well as texts in this manual,take the physical item as the most accuracy.
Vaizdo įrašas – produktas baigtasview
ATSISIŲSTI PDF:
Nuorodos
- Vartotojo vadovasmanual.tools
Published: July 16, 2026