IQUNIX L80 Dynamic Equation Mechanical Keyboard User Manual

1. Įvadas

Thank you for choosing the IQUNIX L80 Dynamic Equation Mechanical Keyboard. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new keyboard. Please read this manual carefully to ensure proper use and to maximize your experience with the product.

2. Sąranka

2.1 Pakuotės turinys

• IQUNIX L80 Mechanical Keyboard
• USB-C kabelis
• Vartotojo vadovas (šis dokumentas)

2.2 Klaviatūros įkrovimas

The IQUNIX L80 keyboard is equipped with a 4000mAh rechargeable battery. Before first use, it is recommended to fully charge the keyboard.

1. Prijunkite pateiktą USB-C laidą prie klaviatūros USB-C prievado.
2. Kitą USB-C laido galą prijunkite prie maitinamo USB prievado (pvz., kompiuterio, sieninio adapterio).
3. The keyboard's indicator light will show charging status (refer to the operating section for specific light indicators).

2.3 Ryšio režimai

The IQUNIX L80 supports multiple connectivity options:

• „Bluetooth“ belaidis ryšys: For connecting to devices wirelessly via Bluetooth.
• 2.4G belaidis ryšys: For connecting wirelessly via a dedicated 2.4G USB receiver (not explicitly mentioned in data, but implied by '2.4G game office').
• Laidinis (USB-C): For a direct, stable connection and charging.

Refer to the 'Operating' section for instructions on switching between these modes.

3. Naudojimo instrukcijos

3.1 Maitinimo įjungimas/išjungimas

Locate the power switch on the keyboard. Slide it to the 'ON' position to power on and 'OFF' to power off.

3.2 Switching Connectivity Modes

The keyboard typically has a switch or key combination to toggle between Bluetooth, 2.4G, and Wired modes. Consult the specific key legends or a dedicated switch on your keyboard for this function.

• „Bluetooth“ susiejimas: In Bluetooth mode, the keyboard will enter pairing mode (often indicated by a flashing LED). Ieškokite 'IQUNIX L80' on your device's Bluetooth settings and connect.
• 2.4G jungtis: Insert the 2.4G USB receiver into your computer. Switch the keyboard to 2.4G mode. The connection should be established automatically.
• Laidinis ryšys: Connect the USB-C cable from the keyboard to your computer. The keyboard will automatically switch to wired mode.

3.3 Foninio apšvietimo valdymas

The IQUNIX L80 features a monochrome backlight. Use the designated function keys (often Fn + arrow keys or specific F-keys) to adjust brightness or change backlight patterns.

3.4 Hot-Swap Switches

The IQUNIX L80 supports hot-swappable switches, allowing you to change mechanical switches without soldering. Use the provided switch puller tool to carefully remove switches and insert new ones. Ensure the new switches are compatible (e.g., 3-pin or 5-pin).

4. Priežiūra

4.1 Valymas

• Klaviatūros dangteliai: Use a keycap puller to remove keycaps. Clean them with mild soap and water, then dry thoroughly before reattaching.
• Klaviatūros korpusas: Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the keyboard.
• Tarp raktų: Norėdami pašalinti dulkes ir šiukšles iš tarpų tarp klavišų, naudokite suslėgtą orą.

4.2 Saugykla

Klaviatūrą laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų. Jei laikysite ilgesnį laiką, įsitikinkite, kad baterija yra iš dalies įkrauta (apie 50 %), kad pailgintumėte jos tarnavimo laiką.

5. Problemų sprendimas

5.1 Klaviatūra nereaguoja

• Įsitikinkite, kad klaviatūra įjungta.
• Check the connectivity mode (Bluetooth, 2.4G, Wired) and ensure it matches your device's connection.
• For wired mode, try a different USB port or cable.
• For wireless modes, ensure the keyboard is charged.
• Try restarting the keyboard and your connected device.

5.2 Connectivity Issues (Bluetooth/2.4G)

• Įsitikinkite, kad klaviatūra yra jūsų įrenginio diapazone.
• Remove any potential interference sources (e.g., other wireless devices).
• Re-pair the Bluetooth connection or re-insert the 2.4G receiver.
• Update your device's Bluetooth drivers if necessary.

5.3 Keys Not Working

• If a specific key is not working, and your keyboard has hot-swappable switches, try removing and re-inserting the switch for that key.
• Įsitikinkite, kad po klaviatūros dangteliu ar jungikliu nėra jokių šiukšlių.
• If multiple keys are affected, try resetting the keyboard (refer to the manufacturer's website for specific reset procedures if not in this manual).

6. Specifikacijos

7. Vartotojo patarimai

• Tinkinimas: Paimk advanątage of the hot-swappable switches to experiment with different switch types (e.g., TTC speed silver, cherry MX red, TTC ACE) to find your preferred typing feel.
• Baterijos veikimo laikas: To conserve battery life, remember to turn off the keyboard when not in use for extended periods.
• Firmware atnaujinimai: Periodically check the IQUNIX official websvetainėje, kurioje pateikiami visi galimi programinės įrangos atnaujinimai, užtikrinantys optimalų našumą ir prieigą prie naujų funkcijų.
• Keycap Compatibility: When replacing keycaps, ensure they are compatible with standard Cherry MX stems for a secure fit.

8. Garantija ir palaikymas

For any product-related issues, technical support, or warranty claims, please contact the seller or the official IQUNIX customer service. Keep your purchase receipt as proof of purchase.

• Greitas pristatymas ir pinigų grąžinimas: In case of delivery delays or product issues, you may be eligible for compensation or refunds as per seller policies.
• Nemokamas grąžinimas: The product may be eligible for free returns within 90 days of purchase. Please check with the seller for specific terms and conditions.