Produktas baigtasview
The Vjoycar Auto Projector HUD (Head-Up Display) is designed to project essential vehicle information directly onto your car's windshield. This allows drivers to monitor critical data such as vehicle speed, voltage, RPM, and fuel consumption without diverting their gaze from the road, thereby enhancing driving safety and convenience.
Video: Demonstration of the Vjoycar HUD in action, displaying vehicle speed and other data on the windshield while driving.
Pagrindinės savybės
- Rich Content Display: Features 12 main functions including Speed, RPM, Coolant Temperature, Voltage, Fuel Consumption, Time, Shift Reminder, and Turbo Pressure.
- Comprehensive Alarms: Includes 6 main alarms such as Overspeed Alarm (single-speed and four-stage), Coolant Alarm, RPM Alarm, and Voltage Signalizacija.
- Perjungiami įrenginiai: Easily switch between Kilometers per Hour (KMH) and Miles per Hour (MPH).
- Didelis HD ekranas: 5.5-inch display with large, clear fonts for easy readability.
- Kuro efektyvumas: Engine RPM alarm and shift reminder functions assist in achieving better fuel economy.
- Automatinis ryškumas: Adjusts display brightness automatically to prevent glare and ensure visibility in various lighting conditions.
- Plug and Play: Simple installation via OBD2 cable.
Vaizdas: Viršview of the 12 main functions and 6 main alarms.
Image: Various display interfaces available for customization.
Pakuotės turinys
Upon opening your Vjoycar HUD package, you should find the following items:
- Vjoycar HUD Unit
- Neslystantis padas
- Reflective Film (for windshield projection)
- OBD2 Connection Cable
- Vartotojo vadovas
Image: Contents of the Vjoycar HUD package.
Diegimo vadovas
Follow these steps to install your Vjoycar HUD:
- Locate OBDII Interface: Find your vehicle's OBDII interface. It is usually located under the dashboard, near the steering wheel.
- Kabelio maršrutas: Carefully route the OBD2 cable from the interface to the desired mounting position for the HUD unit, ensuring it does not interfere with driving controls.
- Connect HUD: Plug the OBD2 cable into the HUD host.
- Secure HUD: Place the HUD host on the dashboard using the provided non-slip pad to ensure it is stable and does not move during driving.
- Apply Reflective Film (Optional): For optimal display clarity, especially in bright conditions, stick the reflective film onto the windshield directly above the HUD unit. Ensure the film is clean and free of bubbles.
Image: Step-by-step installation method for the HUD.
Naudojimo instrukcijos
The Vjoycar HUD features a user-friendly interface with a main button for navigation and adjustments. The device will automatically power on and display information after starting the car.
Menu Navigation and Value Adjustment:
The HUD has a main button (often referred to as a scroll wheel or push button) that allows you to navigate through settings and adjust values. The user manual (included in the package) provides a detailed comparison table for menu items and their corresponding values.
- Entering Settings Mode: Long push the main button inward to enter the settings mode.
- Meniu elementų keitimas: While in settings mode, push the button inward to cycle through menu options.
- Reikšmių koregavimas: For a selected menu item, push the button left or right to change its value.
- Išėjimas iš nustatymų: Long push the button inward again to save changes and exit the settings mode.
Example Adjustments:
Changing Speed Unit (KM/H to MPH):
- Long push the main button inward to enter settings mode.
- Push the button inward repeatedly until you reach the "Speed Unit" setting (Menu item 22).
- Push the button left or right to change the value from '0' (KM/H) to '1' (MPH).
- Long push the button inward to save and exit.
Calibrating Speed:
If the HUD speed display differs from your car's actual speed (e.g., car speed 80km/h, HUD 75km/h), you can adjust the speed value:
- Long push the main button inward to enter settings mode.
- Push the button inward repeatedly until you reach the "Speed" setting (Menu item 0).
- Push the button left or right to adjust the value (e.g., from 105 to 100 to match the car's speed).
- Long push the button inward to save and exit.
Image: The HUD displaying real-time vehicle data on the windshield.
Trikčių šalinimas
Dažnos problemos ir sprendimai:
- HUD does not power on: Ensure the OBD2 cable is securely connected to both the HUD unit and the vehicle's OBDII port. Check vehicle ignition status.
- Inaccurate Speed Display: Refer to the "Calibrating Speed" section under Operating Instructions to adjust the speed value.
- Display is too dim/bright: The HUD features automatic brightness adjustment. If manual adjustment is preferred, enter settings mode and navigate to the "Brightness" setting (Menu item 8) to adjust the level (1-11).
- No Display or Partial Display: Check the reflective film placement. Ensure the HUD unit is positioned correctly.
- Incompatibility with Vehicle: The OBD2 working mode may not be compatible with certain vehicles. This includes almost 98% of cars manufactured before 2004, some old oil/electric hybrid cars, diesel-powered cars, pickup trucks, SUVs, ORVs, mini buses, and a few other special car models.
- RPM Alarm Flashing: This indicates the engine RPM has exceeded the set alarm value.
- Coolant Alarm Flashing: This indicates the engine coolant temperature has exceeded the set alarm value.
Techninės specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Išvesties dažnis | OBD HUD |
| Nominali galia | DC12V |
| Dydžio pavadinimas | 150 * 85 * 14 (mm) |
| Wire or Wireless | Laidinis |
| Prekės ženklo pavadinimas | VJOYCAR |
| Kilmė | Žemyninė Kinija |
| Ekranas | 5.5'' screen display |
| Rodymo metodas | Project on windshield |
| Greičio vienetas | KMH/MPH |
| Ekrano spalva | Mėlyna ir balta |
| HUD Weight | 110g |
| Aplinkos temperatūra | -40°C iki +80°C |
| Atmosferos slėgis | 86-106 KPa |
| Santykinė drėgmė | 10 % – 95 % |
| Aplinkos triukšmas | <= 60 dB (A) |
| Aliarmo garso lygis | 30dB (A) |
| Darbo ttage | 9V ~ 16Vdc (12Vdc / 400mA) |
Naudotojo patarimai
- Visibility in Bright Conditions: If you experience difficulty seeing the projection in very bright sunlight, ensure the reflective film is properly applied to your windshield. This significantly enhances visibility.
- Ekrano tinkinimas: Experiment with the different interface options to find the one that best suits your driving preferences and provides the most relevant information at a glance.
- Utilize Alarms for Safety: Configure the overspeed, RPM, and coolant alarms to your desired thresholds. These audible warnings can be crucial for maintaining safe driving habits and monitoring engine health.
- Kuro efektyvumas: Pay attention to the shift reminder and RPM display to optimize your gear changes for better fuel economy.
Garantija ir palaikymas
For any warranty claims, technical assistance, or product support, please refer to the contact information provided by your original retailer or the manufacturer, Vjoycar. Keep your purchase receipt as proof of purchase.
