Mileseey DT11 Laser Measuring Tape User Manual

1. Produktas baigtasview

The Mileseey DT11 is a versatile 2-in-1 measuring tool, combining a laser distance meter with a traditional retractable tape measure. It is designed for accuracy and ease of use in various applications, from home renovation to professional construction. This device features a high-definition LCD display, multiple measurement modes, and a durable, ergonomic design.

Figure 1: Mileseey DT11 Laser Measuring Tape

Pagrindinės savybės

• 2 viename funkcionalumas: Combines a 40m (131ft) laser rangefinder with a 5m (16ft) physical tape measure.
• Didelis tikslumas: Laser measurement accuracy of ±2mm.
• Įkraunama baterija: Integrated lithium battery, USB rechargeable, providing up to 5 hours of continuous use.
• Magnetinis kabliukas: High-quality magnetic hook for stable attachment to metal surfaces.
• Automatic Calculation: Supports automatic calculation for area and volume.
• Vieneto konvertavimas: Easily switch between Metric (m/cm) and Imperial (ft/in) units.
• HD LCD Digital Display: Reverse display LCD for clear visibility in various lighting conditions.
• IP54 apsauga: Water-resistant and dustproof for enhanced durability.
• Patvarus dizainas: Nylon coating for wear-resistant, non-slip, and drop-resistant performance.

Figure 2: DT11 Key Features

2. Sąranka ir įkrovimas

Išpakavimas

Upon receiving your Mileseey DT11, carefully open the packaging and ensure all components are present:

• Mileseey DT11 Laser Measuring Tape
• USB įkrovimo laidas
• Vartotojo vadovas (šis dokumentas)
• Sertifikatas

Pradinis įkrovimas

The DT11 is powered by a high-quality rechargeable lithium battery. Before first use, it is recommended to fully charge the device.

1. Raskite USB įkrovimo prievadą įrenginio šone.
2. Connect the provided USB charging cable to the DT11 and a compatible USB power source (e.g., computer, wall adapter).
3. LCD ekrane esantis akumuliatoriaus indikatorius rodys įkrovimo būseną.
4. A full charge typically allows for 5 hours of continuous operation.

Figure 3: DT11 USB Charging Port

Maitinimo įjungimas/išjungimas

• Maitinimas: Press and hold the 'MEAS' button for a few seconds until the LCD display illuminates.
• Išjungti: Press and hold the 'MEAS' button again for a few seconds. The device also features an auto-off function: the laser will turn off after 30 seconds of inactivity, and the entire device will power off after 180 seconds of suspension to conserve energy.

3. Naudojimo instrukcijos

Bendra operacija

Figure 4: DT11 HD LCD Digital Display

• Meniu mygtukas: Used for switching between different measurement modes (single, area, volume, Pythagoras) and viewing measurement history.
• MATAVIMO mygtukas: Initiates a measurement (single or continuous).
• UNIT mygtukas: Short press to switch between measurement units (M/In/Ft). Long press to switch the measuring basis (front or rear edge of the device).

Lazerinis matavimas

1. Maitinimas: Press the 'MEAS' button to turn on the laser.
2. Vienas matavimas: Aim the laser at the target point and press the 'MEAS' button again. The measured distance will be displayed on the LCD.
3. Nuolatinis matavimas: After turning on the laser, press and hold the 'MEAS' button. The device will continuously measure and display the current distance as you move it. Release the button to stop.
4. Matavimo režimai: Use the 'Menu' button to cycle through modes:
   • Vienas matavimas: Matuoja vieną atstumą.
   • Ploto matavimas: Išmatuokite dvi kraštines (ilgį ir plotį), o prietaisas apskaičiuos plotą.
   • Tūrio matavimas: Measure three sides (length, width, and height), and the device calculates the volume.
   • Pythagoras (2-Point): Used for indirect measurement of height or distance using two measurements.
5. Atskaitos taškas: Long press the 'UNIT' button to switch the measurement reference point between the front and rear of the device. This is crucial for accurate measurements depending on how you position the device.

Figure 5: DT11 Display and Unit Conversion

Tape Measure Usage

The DT11 includes a traditional 5m (16ft) retractable tape measure. Simply pull out the tape to the desired length. The tape features both metric (M/CM) and imperial (ft/in) markings for convenience. The magnetic hook at the end of the tape allows for easy attachment to metallic surfaces, improving stability during measurement.

Figure 6: DT11 in various measurement applications

4. Priežiūra ir priežiūra

• Valymas: Naudokite minkštą, damp šluoste įrenginiui valyti. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Prietaisą laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Akumuliatoriaus priežiūra: Norėdami pailginti akumuliatoriaus veikimo laiką, venkite dažnai visiškai jį iškrauti. Reguliariai įkraukite įrenginį, net jei jis ilgą laiką nenaudojamas.
• Apsauga: The DT11 has IP54 protection, making it resistant to dust and splashes. However, avoid submerging it in water or exposing it to heavy rain.

Figure 7: DT11 IP54 Protection

5. Problemų sprendimas

• Įrenginys neįsijungia: Įsitikinkite, kad akumuliatorius įkrautas. Prijunkite prie USB maitinimo šaltinio ir bandykite dar kartą.
• Inaccurate laser measurements: Check the reference point setting (front or rear of the device). Ensure the laser beam is not obstructed and the target surface is suitable for reflection.
• Ekrano problemos: If the display is dim or unreadable, ensure the battery is charged. If the issue persists, contact customer support.
• Lazeris nespinduliuoja: Check if the device is powered on. If the laser auto-off function has activated, press 'MEAS' again to reactivate.

6. Specifikacijos

7. Garantija ir palaikymas

The Mileseey DT11 Laser Measuring Tape is designed for reliability and durability. For detailed warranty information and customer support, please refer to the official documentation provided with your product or visit the manufacturer's websvetainę.

Skaitmeninę naudotojo vadovo versiją galima atsisiųsti: Mileseey DT11 User Manual (PDF)